I am not new to suppressors but am new to 300 blackout. I am looking for a can for a light wt bolt gun. I was thinking about the flow 9m or the 9k ti from Huxwrx mainly because of cost and the light wt of the cans, especially w a direct thread alpha adapter. I have also been super impressed by the lightweight 3-D printed 22 can from Huxwrx. Looking for suggestions and/or potential alternatives.

OK this is a complete mismatch of can and needs on a bolt gun there is not an obviouse reason to consider a low gas pressure can like the hux on bolt gun. You give up sound performance to get less gas that you don't actually care about.
So there are a million great cans that would fit your needs but it always helps to have you tell us what matters, price, size, weight, sound etc.
Me I'd suggest the PTR vent to look at for starters. but that’s very pricy.
Me I'd also suggest hitting the TB summit results and Pew for some data.
But to be blunt you don't want either of the Hux cans in the OP for this application.
If you want a .22lr suppressor get a B&T tiger and be happy.
YMMV...

This message has been edited. Last edited by: hrcjon,

Thank you for the input and let me do a better job of clarifying.

I only mentioned the hux 22 can as something that I already have and really like, thus the reason I was gravitating towards another Hux can.

I do not shoot a lot of 30 cal. I mainly shoot pistols and reload my own 9 and 45 (along with many other cartridges). I was looking for
a. light wt can
b. affordable can that did a good job on 300BO but could also be used on pistols.

I recently put together a pretty light wt bolt action rifle setup that I am hoping to take hog hunting next year and was thinking it would be fun to have a light wt can on it.

The other part of the puzzle is that I already bought a direct thread alpha adapter to use w my Hux 45M can and realized after the fact that Huxwrx does not recommend the flow 45m can for 300bo which I found to be odd beings that the flow 9m can is rated for 300bo.

Right now I have the Omega 9k can on the bolt 300BO (using the direct thread alpha adapter)bolt gun but have not fired it yet. I primarily use the 9k suppressor w tri-lug mount on a couple other 9mm sbrs.

Will certainly research the

I recently impulse purchased a Canik Void 9. It was new enough that there were not a lot of reviews available, but so far I'm really happy with it. It is designed/ manufactured by Otter Creek Labs and is 3D printed Titanium with Alpha threads. It comes with 2 end caps so you have a flow option or a sealed option. Tough enough to be rated for supersonic on 9" barrel 300 blackout. At 7.5 ounces it's pretty light for something rifle rated.

So far I've only run it on pistol but I appreciate the vented cap sending the gas down range more than I thought I would.

I have used the Flow45 on my 300blk rem 700. It does an awesome job

quote:

Originally posted by badguybuster:
I have used the Flow45 on my 300blk rem 700. It does an awesome job

I bought the flow 45m thinking that if the 9mm version is rated for 300bo, then the 45 would be as well but when I contacted Huxwrx to confirm, they said it was only rated for straight wall cartridges and was not rated for 300bo.