I've only had it an hour. Ran out back and shot it into the ground real quick. I'll get a proper video this weekend comparing it to the Shaw and CMMG.
It' going to live on the BoreBuddy as it's FRT mag dump rated.
It's supposed to be on par with the venerable Dead Air Mask, which is amazing with absolutely no first round pop.
It weighs in at 3.75oz - printed titanium. - $400
The CMMG weighs in at 5.85oz - aluminum and steel. $275
The Shaw Mini Beast weighs in at 5.0oz. - combination of steel, titanium and aluminum. $400
____________________________
Eeewwww, don't touch it! Here, poke at it with this stick.
October 22, 2026, 11:59 AM
ltz400
Looks like a great setup. The specs for it say it's very lightweight. Question: How do you clean it?
October 22, 2026, 12:46 PM
Mars_Attacks
quote:
Originally posted by ltz400: Looks like a great setup. The specs for it say it's very lightweight. Question: How do you clean it?
Just drop it in a sonic cleaner with some simple green or dish soap was what they told me.
____________________________
Eeewwww, don't touch it! Here, poke at it with this stick.
October 22, 2026, 01:01 PM
ltz400
It will be interesting to see the long term results (longevity and durability) for these printed suppressors.
October 22, 2026, 05:32 PM
Mars_Attacks
It should last forever with a .22LR, no matter how much I punish it.
It's going on the BoreBuddy and I am going to abuse it severely.
____________________________
Eeewwww, don't touch it! Here, poke at it with this stick.
October 22, 2026, 07:02 PM
flesheatingvirus
Have you noticed any difference between super and subsonic with that setup? My setup is similar, though with a Mask, and the supersonic ammo has no crack.
________________________________________
-- Fear is the mind-killer. Fear is the little-death that brings total obliteration. I will face my fear. I will permit it to pass over me and through me. And when it has gone past me I will turn the inner eye to see its path. Where the fear has gone there will be nothing. Only I will remain. --
October 22, 2026, 08:26 PM
hrcjon
quote:
Question: How do you clean it?
B&T says you fill it with one of the suppressor cleaning solutions. They sell Schletek and I've used that, but I'm sure any of the other brands would be equally fine.
“So in war, the way is to avoid what is strong, and strike at what is weak.”
October 22, 2026, 11:05 PM
ltz400
quote:
Originally posted by flesheatingvirus: Have you noticed any difference between super and subsonic with that setup? My setup is similar, though with a Mask, and the supersonic ammo has no crack.
The ammo will not attain supersonic speeds from the shorter barrels. Take a look at BBTI and you can see the length that the ammo will begin to get fast enough to make a crack. I use CCI mini mags in all pistols through a Dead Air Mask and they all sound the same. It will begin to crack at about 5.5" to 6" of barrel length. When using an 8" Charger or rifle lengths I just make sure to use standard velocity (below 1125 fps)or below.
October 23, 2026, 09:29 AM
jeeperxd
I use simple green aviation formula in my ultrasonic and my Tiger comes out spotless.
