Surefire 328LMF-B. Compact LED 500 Lumen Forend WeaponLight for H&K MP5, SP5, HK94, HK53

The quintessential battle-ready compact WeaponLight for Heckler & Koch platforms
500 lumens of output from a single 123A battery
Intuitive switching won't compromise grip on the weapon
Virtually indestructible LED and TIR lens produce brilliant beam optimized for close- to medium-range applications
Ergonomic switching provides positive control of illumination with a normal firing grip
Hard-anodized aluminum body, tempered window & O-ring seals make light rugged and durable

Upgrade Your Furniture. The SureFire 328LMF-B dedicated forend WeaponLights replace the original forend of your Heckler & Koch MP5 submachine gun, HK53 rifle, or HK94 carbine, and provide high-intensity illumination required to dominate a low-light tactical situation. Each features a virtually indestructible LED emitter focused by a TIR lens, producing a brilliant beam optimized for close- to medium-range applications. The 328LMF-B generates 500 lumens of output and has a runtime of one hour on a single 123A lithium battery. The 328LMF-B features a single momentary-on pressure-pad switch integrated into the right side of the forend and a rocker-type constant-on switch on the left side, allowing positive control of the light while maintaining your normal firing grip.

KEY ATTRIBUTES
High Output: 500 lumens
High Runtime: 1 hour
Peak Beam Intensity: 7,600 candela
Batteries: One 123A lithium (incl.)
Switching: Pressure pad + constant-on rocker
Length: 8.14 in (20.6 cm)
Output
High Output: 500 lumens
High Runtime: 1 hour
Distance: 175 meters
Body
Construction: Polymer / aluminum
Finish: Mil-Spec hard anodized (bezel only)
Weight W/ Batteries: 9.6 oz (272.2 g)
Bezel Diameter: 1.125 in (2.9 cm)

SUREFIRE 328LMF-B COMPACT LED WEAPONLIGHT FOR HK MP5 SP5 HK53, $584.00
https://www.robertrtg.com/stor...P5-HK53-107p4228.htm

Get a better grip with the CRH Customs Extended Charging Handle for AKs. Made with 1018 steel, these charging handles are 35 mm in length and weighs 53 grams.

Easy to install. requires no permanent modifications.

Made by CRH Customs (formerly Circle 10 AK) who has provided the American firearms community with 20 years of exceptional quality and reliability. Every CRH Customs part is designed, developed, tested and manufactured right here in the USA.

AK EXTENDED CHARGING HANDLE, CRH CUSTOMS / CIRCLE 10 AK, $24.95
https://www.robertrtg.com/stor...CLE-10-AK-4p8315.htm


AK EXTENDED CHARGING HANDLE FOR ZHUKOV FOLDERS, CRH CUSTOMS / CIRCLE 10 AK, $24.95
https://www.robertrtg.com/stor...CLE-10-AK-4p8316.htm

The ALG AK Trigger Enhanced with Lightning Bow (AKT-EL) is a single stage trigger designed for the AK47 and AK74 variant platforms. The AKT-EL features a smoother and shorter trigger pull than the stock trigger and is ideal for combat and home defense use. It is machined from gun quality alloy steel and has a corrosion resistant Manganese Phosphate finish.

The AKT-EL features the Lightning Bow, which produces a very comfortable feel to the user over the stock trigger, while enhancing trigger control. For OEMs and builders, the AKT-EL lends three parts towards 922(r) Compliance.

ALG DEFENSE AK TRIGGER ENHANCED, AKT-EL, $114.95
https://www.robertrtg.com/stor...ED-AKT-EL-4p4345.htm

AK47 AKM SHORT KEYMOD HANDGUARD, $58.35
https://www.robertrtg.com/stor...HANDGUARD-4p6603.htm


AK47 AKM MEDIUM KEYMOD HANDGUARD, $69.75
https://www.robertrtg.com/stor...HANDGUARD-4p6604.htm


AK47 AKM LONG KEYMOD HANDGUARD, $82.75
https://www.robertrtg.com/stor...HANDGUARD-4p6605.htm


YUGO M70 AK47 KEYMOD HANDGUARD, $58.35
https://www.robertrtg.com/stor...HANDGUARD-4p4612.htm

German HK USP .40 16rd magazine. These are made to work with HK USP Jet-Funnels however they fit and function perfect in all HK USP .40 full size pistols. Without the Jet-Funnel, they will extend past the grip.

ORIGINAL HK, MADE IN GERMANY

CONDITION: NEW

HK PART NUMBER 215116

HK USP .40 16RD EXPERT MAGAZINE NEW, GERMAN, $49.95
https://www.robertrtg.com/stor...W-GERMAN-12p6022.htm

The GG&G Benelli M1 & M2 Magazine Extension is easy to install as long as you have a working knowledge of how to break down your shotgun to perform maintenance procedures. No modification to the shotgun is required. These three shot Magazine Extensions use the factory follower or you can purchase a GG&G Benelli Enhanced High Visibility Follower (GGG-1509) for it as well. Also available are GG&G Benelli M1 Barrel Clamps (GGG-1871) & GG&G Benelli M2 Barrel Clamps (GGG-1812).

GG&G BENELLI M1 +3 MAGAZINE TUBE EXTENSION, $79.95
https://www.robertrtg.com/stor...XTENSION-15p9041.htm


GG&G BENELLI M1 +3 MAGAZINE TUBE EXTENSION, $79.95
https://www.robertrtg.com/stor...XTENSION-15p9040.htm

GG&G had the privilege to be involved with the FNH SCAR family of rifles early on when SOCOM was testing it for adoption. When FNH decided to release the SCAR to the retail public we knew it would be well received. We have designed and manufactured a few Tactical Accessories that enhance the SCAR and your shooting experience.

The SCAR Forward Accessory Rail is one of those accessories. The Forward Accessory Rail allows the shooter additional mounting space for accessories forward of the standard forearm. This not only allows the shooter to utilize different hand positions, but also provides room for an integral QD Sling Swivel socket.

SPECIFICATIONS:

Will fit SCAR models: MK16, MK17, MK16S and MK17S.
SCAR Forward Accessory Rail is 6 1/16" long to provide additional rail space for lights or lasers.
Extends approximately 2" forward of original factory accessory rail.
Manufactured to MIL-STD-1913 specifications.
The integral Quick Detach sling attachment is located far enough forward so the sling does not interfere with the reciprocating charging handle.
Can be installed on either side to accommodate both right and left handed shooters.
The QD swivel socket has limited rotation built in to prevent sling wrap-up.
All corners have been rounded to protect the shooter.
Maintains FN's original spring-lock barrel mounting system.
Rail weighs 2.4 oz
Manufactured from tough 6061-T6 billet aluminum and Type III hard coat anodized matte black per MIL-SPEC.
Warranty: Lifetime.
Made In America By Men And Women Proud To Be Americans!

GG&G SCAR FORWARD ACCESSORY RAIL W/ QD, $43.45
https://www.robertrtg.com/stor...SORY-RAIL-8p9039.htm

Scroll down to see our previous ads with the more recent ones on the last page.

AC-Unity German market AK47 30rd magazines are back, and so is our special deal on them! While supplies last we are going to sell these 30RD and the 40rd versions in 20-Packs for only $99! That’s less than $5 per mag! Load up on mags or start your own group buy, because when they're gone, they're gone!

20-PACK GERMAN MARKET AC-UNITY AK47 30RD MAGS, UNDER $5 EACH, $99.00
https://www.robertrtg.com/stor...ER-5-EACH-4p8950.htm


20-PACK GERMAN MARKET AC-UNITY AK47 40RD MAGS, UNDER $5 EACH, $99.00
https://www.robertrtg.com/stor...ER-5-EACH-4p9054.htm

What a nicely machined bolt group. LE agencies must have paid a fortune for these when new.

HK G36 FX Simunition training kit. Includes bolt group with charging handle, cleaning cable, cleaning brushes, directions and original box.

Very-good condition. Only a couple available.

FX SIMUNITIONS KIT FOR HK G36 G36K G36C, $249.00
https://www.robertrtg.com/stor...36K-G36C-12p9119.htm

Beautiful threaded barrel for your SIG P320 or M17 9mm. Includes notch-cut for loaded chamber indicator (LCI).

Grey Ghost Precision, GGP320 Full Size, Match Grade Barrel, Fits Sig Sauer P320 Full Size, 9MM, Threaded, 1/2 x 28 RH, 416R Stainless Steel, Black Nitride Finish

SIG P320 FULL SIZE MATCH GRADE THREADED BARREL 1/2x28, WITH LCI, BLACK, GREY GHOST PRECISION, $172.95
https://www.robertrtg.com/stor...ECISION-216p9114.htm

MKE MP5 30rd curved steel magazine. Brand new condition. Great magazine for your German HK, POF, MKE, PTR or other MP5/SP5/MP5K/SP5K style clone.

Made by MKE in Turkey, a licensed HK manufacturer. Produced to exact HK specifications on HK equipment using 100% German spec materials.

This MP5 30rd mag fits all HK MP5/HK94/SP89/MP5K/SP5K, MKE, Zenith ZR5RS, POF MP5/MP5RS, BW5, SW5, CA94 and other HK 9mm clones.

MKE MP5 30RD STEEL MAGAZINE NEW, $49.99
https://www.robertrtg.com/stor...ZINE-NEW-14p2246.htm

AC-UNITY AK74 5.45X39 30RD CLEAR MAGS, $14.95
https://www.robertrtg.com/stor...C-UNITY-391p8670.htm


AC-UNITY AK74 5.45X39 30RD WINDOW MAGS, $13.95
https://www.robertrtg.com/stor...C-UNITY-391p7012.htm


AC-UNITY AK74 5.45X39 45RD WINDOW MAGS, $15.95
https://www.robertrtg.com/stor...C-UNITY-391p7025.htm

Czech M10M Gas Mask Family Kit. Includes three new M10M Gas masks with filters, thirty extra new filters and three Czech canteens designed to be used with the drinking attachment on the M10M gas mask.

This is a great kit at an amazing price. Everything you need to keep your family breathing clean and drinking fluids when TSHTF.

Each Family Pack includes:

3 x Czech M10M Gas Mask with Filter
The Czech M10M is a modernized, improved version of the Soviet M10 which was a copy of the U.S. M17 gas mask. Comes with filter and drinking tube. This is a lightweight and comfortable mask. Specially designed for extended use with superior comfort, secure fit, and low breathing resistance. The M10M mask's main purpose is to protect from nuclear, biological, and chemical agents.

30 x Extra Filters
Brand new in sealed wrapper. These modern, asbestos-free will keep you and your family breathing clean

3 x Czech M60 Canteen Kits
These are the correct canteens designed to attach to the M10M drinking tube. They say this is for water but knowing the Czechs I am sure they work with beer and schnapps too!

CZECH M10M FAMILY PACK, 3-MASKS, 3 DRINKING KITS, 30 EXTRA FILTERS, $249.95
https://www.robertrtg.com/stor...A-FILTERS-8p9122.htm

No shotgun should have a plastic magazine follower! Steel followers are far more reliable in dirty conditions. More reliable when you need the gun most.

The GG&G Benelli Follower for the Benelli M1, M2, M3, and M4 12 gauge shotguns is an enhanced follower manufactured with the Benelli Tactical Shotgun Shooter in mind. Installs just like the factory Benelli follower. No modification to the shotgun required.

Easy to install.
Better control of spring movement.
Increased reliability in dirty conditions.
Made from stainless steel.
Corrosion and wear resistant.
Made in the USA!

GG&G BENELLI M1 M2 M3 M4 STAINLESS STEEL FOLLOWER, $27.95
https://www.robertrtg.com/stor...FOLLOWER-15p7356.htm

Just got an email that MKE MP5 magazines are back in stock, they are the best budget option out there. Order from RTG with confidence!

quote:

Originally posted by Voshterkoff:
Just got an email that MKE MP5 magazines are back in stock, they are the best budget option out there. Order from RTG with confidence!

You are absolutely right. I am going to post those today, but they are back in stock and available right now on our website. Thanks Voshterkoff!

Finally, a flat built just for the CETME C with a flat sided mag well.
Made on the same German HK tooling, from steel with the correct spec and thickness, as our new production G3 receiver flats (SKU: HKK-9902), which are the best quality, easiest to fold HK91-G3 receiver flats ever available.

Correct dimensions with flat rails and deep embossing with scope tabs that are more to spec than any other flat.

CETME C RECEIVER FLAT, $79.99
https://www.robertrtg.com/stor...IVER-FLAT-2p3996.htm

MKE MP5 30rd curved steel magazine. Brand new condition. Great magazine for your German HK, POF, MKE, PTR or other MP5/SP5/MP5K/SP5K style clone.

Made by MKE in Turkey, a licensed HK manufacturer. Produced to exact HK specifications on HK equipment using 100% German spec materials.

This MP5 30rd mag fits all HK MP5/HK94/SP89/MP5K/SP5K, MKE, Zenith ZR5RS, POF MP5/MP5RS, BW5, SW5, CA94 and other HK 9mm clones.

MKE MP5 30RD STEEL MAGAZINE NEW, $49.99
https://www.robertrtg.com/stor...ZINE-NEW-14p2246.htm

SCAR 17S 13-Inch Barrel Assembly
FN Part Number: 98814
Condition: New in Box.
In Stock: For those who have asked. If you can add an item to the shopping cart then it is in stock at our warehouse.

FN American, barrel assembly, .308 Rem / 7.62 NATO, 13 Inch, 1:7 twist, fits SCAR 17S and includes barrel, front sight assembly, gas block / regulator, gas piston and flash hider.

The FN SCAR barrel assemblies are cold hammer-forged, chrome-lined MIL-SPEC steel barrels with front sight assembly, gas block assembly, gas regulator, gas piston and flash hider installed. Available in short lengths for reduced weight, fast handling and confined space maneuvering; standard lengths for replacement of existing barrels; and long lengths for increased velocity and extended range capability. Assemblies can be easily installed by the user with a Torx T25 and 62 In Lb torque wrench and are ready to shoot without headspacing.

FN SCAR 17S 13 INCH BARREL ASSEMBLY, $1149.00
https://www.robertrtg.com/stor...ASSEMBLY-15p4632.htm

Any chance of getting MKE 33/53 5.56mm mags?