SIGforum.com    Main Page  Hop To Forum Categories  Classifieds Section    WTS: SIG P320 COMPACT MATCH GRADE THREADED BARREL 1/2x28, WITH LCI, BLACK, GREY GHOST PRECISION $159.99
Page 1 3 4 5 6 7 8 9 ... 23
Go
New
Find
Notify
Tools
Reply
  
WTS: SIG P320 COMPACT MATCH GRADE THREADED BARREL 1/2x28, WITH LCI, BLACK, GREY GHOST PRECISION $159.99 Login/Join 
Member
posted Hide Post
The Magpul PRS2 (Precision Rifle/Sniper) G3 Model is a drop-in, precision-adjustable buttstock especially designed for the HK G3/91 rifle and its variants. Designed to offer the fine-tuned, customized feel of a precision target stock, the PRS2 is adjustable for both cheek riser height and length-of-pull without sacrificing the durability necessary to withstand the operational environment.

Compared to common plastic fixed stocks, the PRS2 has a similar minimum LOP but can extend up to 1.25" longer. Machined aluminum adjustment knobs feature positive-locking click detents to maintain position under recoil and allows easy, tool-less adjustments by simply rotating the knobs. Machined aluminum butt-plate and alloy steel adjustment shafts provide stability and strength to withstand severe impact conditions. Rubber butt-pad offers positive shoulder purchase to prevent slippage for optimal accuracy even with body armor or modular gear. Stronger and heavier than most OEM stocks, the PRS2 also adds beneficial weight to the rear of normally nose-heavy G3/91 rifles.

SPECIFICATIONS / SPECIAL FEATURES:
* Compatible models include: HK91, HK93, HKG3, HK33, PTR91, SR9.
* Rubber butt-pad with solid aluminum butt-plate core withstands severe impact and recoil
* Machined aluminum adjustment knobs with positive locking click detents
* Black phosphate coated solid alloy steel adjustment shafts
* Bottom threaded inserts for custom sling, rail, or monopod mounting (10-32 threaded)
* Sling Mount Mid - QD Sling Mount Plate accommodates up to 1.5" push-button swivels (left-right reversible)
* Sling Mount Rear - 1.50" sling loop (left-right reversible)
* Weight: 1.93 lb.
* Length, Stock: 9.38-10.63" extended buttpads are available
* LOP Adjustment: ~ 49 Clicks (0.026 in./click)
* LOP Adjustment Range: ~ 1.25"
* LOP, Min: 15.00"
* LOP, Max: 16.25"
* Cheek Height Adjustment: ~ 87 Clicks (0.021 in./click)
* Cheek Height Adjustment Range: ~ 1.82"
* Fore/Aft Cheek Weld Adjustment Range: 0.65"
* U.S. Made; 922r compliant.

MAGPUL PRS2 TACTICAL STOCK FOR HK, $219.95
https://www.robertrtg.com/stor...CK-FOR-HK-2p1954.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 455 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
On sale for a limited time! We want as many shooters as possible to sample these amazing Gen2 magazines. These are the best quality AK magazines we have ever sold. Yes even better than the Russian, German and Bulgarian that we have sold over the last 22 years.

Made from an even denser and more impact resistant material than standard AC-Unity magazines. These are made with the best materials available in 2021! Far superior than what the soviet union could afford to make during the cold war. Try one out and see for yourself!

AK47 30RD 7.62x39 GEN2 WINDOW MAGAZINE, W/ 2-FOLLOWERS, $11.95
https://www.robertrtg.com/stor...AILABLE-164p8170.htm


AK47 40RD 7.62x39 GEN2 WINDOW MAGAZINE, W/ 2-FOLLOWERS, $12.95
https://www.robertrtg.com/stor...AILABLE-164p8171.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 455 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
The VP9 2020 slide quickly and easily converts a standard VP9 OR VP9-B to an optics ready platform. Just install your existing barrel and recoil spring.

VP9 2020 Slide includes:
Cocking supports
Complete firing pin assembly
Cover plate for optics cut
Suppressor height sights. Black serrated rear and high contrast tritium front sight.
The Suppressor Height sights are specific for lower 1/3 co-witness with a mounted RMR. Other sights may vary.

GENUINE HK, MADE IN GERMANY

HK PART NUMBER: 51001080

CONDITION: NEW IN BOX

HK VP9 2020 SLIDE KIT OPTICS READY W/ ELEVATED SIGHTS, $369.95
https://www.robertrtg.com/stor...D-SIGHTS-12p8038.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 455 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Swiss made B&T extra long G36 Picatinny mounting rail with emergency back-up sights. Fits the HK G36, G36K or G36C.

B&T Switzerland is an HK OEM manufacturer and produces top quality accessories for military and law enforcement agencies around the world. This is a military grade part!

B&T HK G36 G36K MOUNTING RAIL WITH EMERGENCY SIGHT - LONG VERSION, $359.95
https://www.robertrtg.com/stor...-VERSION-12p3267.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 455 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Midwest Industries, Generation 2, M70 Handguard, M-LOK Compatible, Rail Topcover, Black

Patented clamping system
Two anti-rotation QD sockets
Lightweight& rugged
M-LOK compatible
One 5 slot mil-spec 1913 picatinny rail top cover

The Midwest Industries Gen 2 Universal M-LOK Handguard brings the AK platform into the 21st century. Machined from 6061 aluminum and given a durable hard coat anodized finish, this handguard comes equipped with M-LOK accessory mounting slots along its length for the addition of tactical accessories. Where accessories are not present, the handguard remains sleek and smooth for improved handling and user comfort. This model comes with a Picatinny top half, and is compatible with Midwest's optic-specific top halves (sold separately). Fits Yugo M70 pattern rifles only. Installation is quick and easy, and generally requires no permanent modification to the host firearm. Like with all Midwest Industries products, this handguard is proudly made right here in the USA and features a lifetime warranty.

MIDWEST INDUSTRIES YUGO M70 MLOK HANDGUARD WITH PICATINNY TOP COVER, $159.95
https://www.robertrtg.com/stor...TOP-COVER-4p8793.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 455 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
On sale for a limited time.

German HK production 30rd magazine for the HK93, HK33, HK53. These are current production in original sealed packaging. Mags are marked Made in Germany.

ORIGINAL HK, MADE IN GERMANY

CONDITION: NEW

HK PART NUMBER 217847S

GERMAN HK33 30RD STEEL MAGAZINE NEW, CURRENT PRODUCTION, $69.95
https://www.robertrtg.com/stor...ODUCTION-14p4151.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 455 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Geissele Automatics, MK4, Super Modular Rail, Handguard, 15", M-LOK, Barrel Nut Wrench Sold Separately (GEI-02-243), Gas Block Not Included, Desert Dirt Color

Height: 2.4"
Inner Diameter: 1.35"
Outer Diameter: 2.11"
Weight w/ Hardware: 15.1oz.
Length 15"
Includes Barrel Nut (Barrel Nut Wrench Sold Separately)
Geissele Automatics AR-15 15" Super Modular Rail MK4 M-LOK

The Super Modular Rail (SMR) MK4 M-LOK is Geissele's ultra-lightweight M-LOK handguard option. These rails are purpose-built and feature integrated short M1913 picatinny rail sections at the fore of the rail in the 3, 6, and 9 o'clock positions. Maximum venting for heat dissipation also dramatically reduces the rail's overall weight, while maintaining its same strong and rigid platform. It utilizes Magpul's M-LOK technology at the 3, 6, and 9 o'clock positions, as well as the upper 45 quadrants. The SMR MK4 is both versatile and modular, allowing the user to tailor their platform to his or her unique needs. The SMR MK4 also features Geissele's proprietary 2.25" long barrel nut. This increases the surface contact where the rail interfaces with the receiver and creates a platform that can be trusted to be straight and true the entire length of the free float rail. This increases accuracy and zero repeatability during disassembly and reassembly when performing maintenance. Requires a Geissele barrel nut wrench for installation (sold separately).

GEISSELE MK4 SUPER MODULAR RAIL HANDGUARD 15" M-LOK, DESERT DIRT, $349.95
https://www.robertrtg.com/stor...SERT-DIRT-6p8794.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 455 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Great new mount from UTG. Offers a world of adjustment to fit the vast majority of soviet spec AK47, AKM and AK74 weapons.

Universally Optimized for Greater Platform Compatibility
Matte Black Anodized Steel-reinforced 6061-T6 Aluminum Construction
Adjustable QR Lever Mount Compatible with Most AK Side Rail Widths
Scalloped 16 Slot Picatinny Rail Features a Deep U-cut Channel for Accessing Iron Sights
Overall Lightweight Design Features 2 Side M-LOK Slots for Attaching Accessories


UTG AK ACCU-SYNC QR SIDE MOUNT SCOPE RAIL, $53.95
https://www.robertrtg.com/stor...-RAIL-UTG-4p8801.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 455 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Swiss made B&T folding stock for APC9, APC45 and APC223. Also fits perfectly on the HK UMP but reduces the HK length of pull by 1 inch.

9 Inch stock length. Weight 9.8 ounces. Includes stock release button assembly. New in original packaging.

B&T APC9 APC45 APC223 HK UMP FOLDING STOCK NEW, $139.95
https://www.robertrtg.com/stor...TOCK-NEW-12p6858.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 455 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Now discontinued. These were a very well made handguard system by Manticore. Rugged, light weight, good looking and made in the USA. You can install the poly scales or keymod panels. Comes with sets of both as pictured.

Perfect fit for your soviet spec, stamped receiver AK47, AKM or AK74.

We just found these in our warehouse. They're from a small Manticore shipment that was misplaced a few years ago. Blowing these out at a great price.

MANTICORE AK TRANSFORMER HANDGUARD FOR STAMPED RECEIVERS, W/ SCALES, $49.95
https://www.robertrtg.com/stor...OD-SCALES-5p8803.htm


MANTICORE AK TRANSFORMER HANDGUARD FOR STAMPED RECEIVERS, KEYMOD & SCALES, $49.95
https://www.robertrtg.com/stor...OD-SCALES-5p8802.htm


MANTICORE AK ALPHA TOP COVER, FOR ALPHA OR TRANSFORMER HANDGUARDS, $19.95
https://www.robertrtg.com/stor...ANDGUARDS-5p8806.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 455 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
We have a small number of beautiful Czech VZ61 Skorpion parts kits. The Skorpion is one of the coolest SMG's to every come out of the Soviet Union.

Each kit comes as pictured and includes one magazine. Barrels were torch cut length wise so they are great to use for a dummy gun. Lower receiver was demilled to BATF requirements. Kits have very consistent cuts.

Conditions are surplus very-good or better. We photographed three separate kits so you can get an idea about the range of conditions. As always with parts kits, it's possible a small part(s) went missing during demill overseas or during transit.

Only a few available. Don't miss out.

VZ61 SKORPION PARTS KIT, $279.95
https://www.robertrtg.com/stor...ARTS-KIT-15p8813.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 455 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
WTS: JMAC CUSTOMS AB-8 1913 FOLDING STOCK, $283.37

(A)rm(B)ar(8)inch with Folding Buttplate and JMac 1913 Folding Mechanism.

Lightweight and Rigid!

Modular Design - Brace/Stock with many mounting options
Integrated QD Sling Socket
8" Length
7075 T6 Aluminum
Hard-Coat Anodized
Folds to prevent snagging while pulling from a bag
Folds clear of drum mags
7075 T6 Aluminum
Hard-coat Anodize
Includes Mounting Hardware (Pin and Clip)

JMAC CUSTOMS AB-8 1913 FOLDING STOCK, $283.37
https://www.robertrtg.com/stor...G-STOCK-106p8814.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 455 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
MP9 TP9 APC9 30RD MAGAZINE NEW, $49.99
https://www.robertrtg.com/stor...ZINE-NEW-14p3623.htm


MP9 TP9 APC9 20RD MAGAZINE NEW, $57.95
https://www.robertrtg.com/stor...ZINE-NEW-14p3624.htm


MP9 TP9 APC9 15RD MAGAZINE NEW, $57.95
https://www.robertrtg.com/stor...ZINE-NEW-14p3625.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 455 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Colt's Manufacturing Part Number LE6933CK. Complete lightweight 'commando' upper, fits AR, 223 Rem/556NATO.

Mil-spec quality straight from Colt!

Includes: 11.5" lightweight chrome lined barrel w/ 1:7 RH twist, Magpul flip up rear sight, standard sling swivel, bolt carrier assembly and charging handle, black finish, not pinned and welded.

COLT LE6933 11.5" 556 NATO UPPER WITH FULL AUTO BCG & CHARGING HANDLE, $849.95
https://www.robertrtg.com/stor...-FA-BCG-394p6557.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 455 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Magpul Industries. MS1 Sling, Fits AR Rifles, 1 or 2 Point Sling, Black

Features the MS1 slider
Dedicated two-point sling
Rapidly adjustable for length
No tails, loops, or other potential snag hazards
Custom 1-1/4" wide nylon webbing material is strong and wear resistant
Light weight yet durable hardware made of heavy-duty polymer
Adapters sold separately

The MS1 Sling is the most versatile addition to the Magpul line of rifle slings. This sling system starts as an optimized, dedicated two-point sling that serves equally well in a one-point role when using optional adapters. Built around our MS1 slider, this system provides rapid adjustments to either lengthen or shorten the sling with no slipping once set, and no tails, loops, or other potential snag hazards. In a two-point role, the MS1 allows easy shoulder transitions, rapid adjustability for hands free rifle carry and shooting support from various positions. The MS1 system also has a series of adapters that are sold separately and based on the MS3 and MS4 slings. By adding the appropriate adapter (available with Paraclip or QD Sling Swivel) for the sling, you can easily add one-point functionality to your MS1. In testing, the sling had to survive tens of thousands of cycles in wet, dry and sandy conditions, static load testing without slippage for 72 hours and weighted six foot dynamic drop tests. In addition to the controlled lab tests, we also swam it, jumped it, hunted with it, hiked into the mountains with it, and most importantly shot with it in a variety of rugged field conditions. The MS1 Sling is made entirely in the USA, and is fully Berry Amendment compliant.

MAGPUL MS1 SLING, 1 OR 2 POINT, FITS AR15, BLACK, $29.95
https://www.robertrtg.com/stor...R15-BLACK-8p8808.htm


MAGPUL MS1 SLING, 1 OR 2 POINT, FITS AR15, COYOTE, $29.95
https://www.robertrtg.com/stor...-AR15-COY-8p8809.htm


MAGPUL MS1 SLING, 1 OR 2 POINT, FITS AR15, GRAY, $29.95
https://www.robertrtg.com/stor...AR15-GRAY-8p8810.htm


MAGPUL MS1 SLING, 1 OR 2 POINT, FITS AR15, RANGER GREEN, $29.95
https://www.robertrtg.com/stor...GER-GREEN-8p8811.htm
[/QUOTE]


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 455 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
On sale for a limited time. Save $20 off of our already low price. Only a few available at this price.

The ROMEO-MSR is a sealed compact green dot intended for MSR, carbine, shotgun and air rifle. Brightness is adjusted with a top-mounted rotary dial, featuring 10 daytime and 2 night vision settings for quick target engagement in any condition.

New in box.

Features:

High-performance lens coatings for excellent light transmission and dot contrast in any situation.
Ultra-compact size and weight with unlimited eye-relief and parallax-free operation.
Precise 2 MOA Dot
Slipover, see-through flip-backs
1.41” T10 Torx M1913 Skeletonized lightweight Riser Mount for absolute co-witness
Top loading battery compartment with integral brightness control featuring 10 daytime and 2 NV settings
Over 20,000 hours runtime on a CR1632 battery
Aircraft grade aluminum housing and mount
Dependable IPX-7 waterproof and fog-proof performance

ON SALE: SIG ROMEO-MSR COMPACT 1X20MM GREEN DOT, $103.95
https://www.robertrtg.com/stor...T-ON-SALE-8p8795.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 455 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Geissele Automatics, MK4, Super Modular Rail, Handguard, 13.5", M-LOK, Barrel Nut Wrench Sold Separately (GEI-02-243), Gas Block Not Included, Black

Height: 2.4"
Inner Diameter: 1.35"
Outer Diameter: 2.11"
Weight w/ Hardware: 13.5oz.
Length 13.5"
Includes Barrel Nut (Barrel Nut Wrench Sold Separately)
Geissele Automatics AR-15 13.5" Super Modular Rail MK4 M-LOK

The Super Modular Rail (SMR) MK4 M-LOK is Geissele's ultra-lightweight M-LOK handguard option. These rails are purpose-built and feature integrated short M1913 picatinny rail sections at the fore of the rail in the 3, 6, and 9 o'clock positions. Maximum venting for heat dissipation also dramatically reduces the rail's overall weight, while maintaining its same strong and rigid platform. It utilizes Magpul's M-LOK technology at the 3, 6, and 9 o'clock positions, as well as the upper 45 quadrants. The SMR MK4 is both versatile and modular, allowing the user to tailor their platform to his or her unique needs. The SMR MK4 also features Geissele's proprietary 2.25" long barrel nut. This increases the surface contact where the rail interfaces with the receiver and creates a platform that can be trusted to be straight and true the entire length of the free float rail. This increases accuracy and zero repeatability during disassembly and reassembly when performing maintenance. Requires a Geissele barrel nut wrench for installation (sold separately).

GEISSELE MK4 SUPER MODULAR RAIL HANDGUARD 13.5" M-LOK, BLACK, $299.95
https://www.robertrtg.com/stor...LOK-BLACK-6p8833.htm


GEISSELE BARREL NUT WRENCH, $8.95
https://www.robertrtg.com/stor...UT-WRENCH-6p8712.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 455 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
The new Kinetic SAS kit takes the amazing Magpul designed Masada (ACR-E) stock system and allows for direct use with your SCAR platform rifle. Stock ships fully assembled with SCAR adapter for drop in use.

Made in the U.S.A.

Features:

Side Folding with Spring lock tension
7 telescoping adjustable positions
Adjustable Cheek Riser
6061-T6 aluminum adapter bracket for added stock support and rigidity
QD Cup (Can be used on either side of the stock)
Watertight CR123 battery compartment
Approx. 2.0 ounces less in overall weight than the factory SCAR stock assembly *Updated* buttpad

Specifications:

Magpul Black color ***Kinetic Development Group does not warrant color variations from your SCAR rifle.***
Weight: Approx. 17.75 oz

KDG SAS SCAR 16S/17S ADAPTABLE STOCK KIT, BLACK, $277.95
https://www.robertrtg.com/stor...IT-BLACK-15p6946.htm


KDG SAS SCAR 16S/17S ADAPTABLE STOCK KIT, FDE, $277.95
https://www.robertrtg.com/stor...UL-BROWN-15p6945.htm




Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 455 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
New in wrap German HK production 12rd .45ACP magazine for your HK Mark 23 SOCOM pistol.

Current production and new in wrap from HK Germany.

Will also function in your USP45

HK part number 215668S

HK MARK 23 SOCOM 12RD .45ACP MAGAZINE NEW, $58.95
https://www.robertrtg.com/stor...ZINE-NEW-12p4588.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 455 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
A direct-thread version of the best-selling Fast-Attach(R) Warden Blast Regulator SureFire designed for use with SureFire 7.62 mm muzzle devices, the SureFire Warden direct-thread blast regulator is precision-machined of rugged stainless steel, heat treated and coated with a durable Cerakote(TM) finish. The Warden enhances the refined appearance of any weapon with a 5/8-24 threaded barrel, protecting the barrel's exposed threads from damage or fouling in lieu of a flash hider or muzzle brake. Its diffuser design directs the muzzle blast forward when the weapon is fired. Measuring just 3.0 inches in length, the Warden adds a mere 6.1 ounces to the weight of the weapon, minimizing any effect on weapon handling characteristics. Unlike Surefire's award-winning sound suppressors, the Warden is not an NFA device and is available wherever SureFire products are sold, without any of the restrictions associated with suppressors.

SUREFIRE WARDEN, FLASH SUPPRESSOR FOR AR 7.62/.308, THREAD 5/8 X 24, $153.00
https://www.robertrtg.com/stor...-5-8-X-24-6p7347.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 455 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
  Powered by Social Strata Page 1 3 4 5 6 7 8 9 ... 23 
 

SIGforum.com    Main Page  Hop To Forum Categories  Classifieds Section    WTS: SIG P320 COMPACT MATCH GRADE THREADED BARREL 1/2x28, WITH LCI, BLACK, GREY GHOST PRECISION $159.99

© SIGforum 2023