Go ![]() | New ![]() | Find ![]() | Notify ![]() | Tools ![]() | Reply ![]() | ![]() |
Member |
This unique part, designed by Wilson Combat engineers, replaces the small and hard to reach factory P320 lo-profile slide catch levers. Stamped from high quality ordnance steel, the deeply grooved and extended Wilson Combat SIG P320 extended slide release is uniquely shaped to improve your reloads under stress without interfering with your grip. This part is precision stamped of ordnance steel and has a black nitride finish. It uses the factory installed slide release spring and post. SIG P320 EXTENDED SLIDE RELEASE BY WILSON COMBAT, $29.95 https://www.robertrtg.com/stor...0-BLUED-216p8441.htm ![]() Thanks for looking and happy shooting! Darwin Nercesian RTG Parts 931 Frank St. Sheridan, WY 82801 Phone: 307-675-1191 Email: darwin@rtgparts.com ![]() ![]() Best Regards, Brayton RTG Parts 931 Frank Street Sheridan, WY 82801 Office: 307-675-1191 Fax: 307-675-1192 www.rtgparts.com brayton@rtgparts.com | |||
|
Member |
BCM makes some of the nicest products in the industry, used by operators all over the world. BCM GUNFIGHTER MOD 0 SOPMOD WIDEBODY MIL-SPEC STOCK, BLACK, $57.95 https://www.robertrtg.com/stor...OCK-BLACK-6p8493.htm ![]() BCM GUNFIGHTER MOD 0 SOPMOD WIDEBODY MIL-SPEC STOCK, FDE, $57.95 https://www.robertrtg.com/stor...STOCK-FDE-6p8494.htm ![]() BCM GUNFIGHTER MOD 1 SOPMOD WIDEBODY MIL-SPEC STOCK, FDE, $69.95 https://www.robertrtg.com/stor...STOCK-FDE-6p8496.htm ![]() Best Regards, Brayton RTG Parts 931 Frank Street Sheridan, WY 82801 Office: 307-675-1191 Fax: 307-675-1192 www.rtgparts.com brayton@rtgparts.com | |||
|
Member |
The Daniel Defense Rail Interface System (RIS II) was designed at the request of the United States Special Operations Command (SOCOM) for the SOPMOD II program. SOCOM had a specific requirement for a free float M203 solution and Daniel Defense responded, designing a revolutionary product to meet the government's need. The Daniel Defense RIS II allows the individual operator to free float the M203 grenade launcher without additional parts. As important, special tools are not required to mount the M203 grenade launcher. This was accomplished by integrating all of the needed parts to free float the M203 into the rail itself. DANIEL DEFENSE MK18 RIS II, https://www.robertrtg.com/stor...AT-FOREND-6p8391.htm ![]() Best Regards, Brayton RTG Parts 931 Frank Street Sheridan, WY 82801 Office: 307-675-1191 Fax: 307-675-1192 www.rtgparts.com brayton@rtgparts.com | |||
|
Member |
Very nice quality reproduction WWII M1 Garand ammo belt. Made of durable canvas with steel hardware. Lots of length adjustability, works with 32-44 inch waists. Great for your M1 Garand collection and absolutely functional in the field. If you ever have a 'Get Off My Lawn' moment with your M1, it's good to have some extra clips handy. Lawn pirates sometimes travel in large packs so be prepared. M1 GARAND M1923 AMMO BELT, $49.95 https://www.robertrtg.com/stor...-BELT-NEW-8p7373.htm ![]() Thanks for looking and happy shooting! Darwin Nercesian RTG Parts 931 Frank St. Sheridan, WY 82801 Phone: 307-675-1191 Email: darwin@rtgparts.com ![]() ![]() ![]() ![]() Best Regards, Brayton RTG Parts 931 Frank Street Sheridan, WY 82801 Office: 307-675-1191 Fax: 307-675-1192 www.rtgparts.com brayton@rtgparts.com | |||
|
Member |
Just came in and more than half are gone. If you want one, get it now. The BFSIII for HK is a 3-Position Trigger. In position 3 it will fire 1 round on Pull and 1 round on Release. This makes it the fastest semi-automatic trigger on the market. FRANKLIN ARMORY BFSIII BINARY TRIGGER PACK FOR HK, $629.99 https://www.robertrtg.com/stor...CK-FOR-HK-2p6941.htm ![]() Thanks for looking and happy shooting! Darwin Nercesian RTG Parts 931 Frank St. Sheridan, WY 82801 Phone: 307-675-1191 Email: darwin@rtgparts.com Best Regards, Brayton RTG Parts 931 Frank Street Sheridan, WY 82801 Office: 307-675-1191 Fax: 307-675-1192 www.rtgparts.com brayton@rtgparts.com | |||
|
Member |
Genuine German HK G36 30rd magazine. Condition is new and unissued. These came bulk packed from the German army but are otherwise new and have never been loaded with ammunition or inserted into a weapon. HK G36 30RD MAGAZINE NEW, GERMAN ARMY PRODUCTION, $29.95 https://www.robertrtg.com/stor...DUCTION-224p6874.htm ![]() Thanks for looking and happy shooting! RTG Parts 931 Frank St. Sheridan, WY 82801 Phone: 307-675-1191 Email: info@rtgparts.com ![]() ![]() ![]() ![]() ![]() Best Regards, Brayton RTG Parts 931 Frank Street Sheridan, WY 82801 Office: 307-675-1191 Fax: 307-675-1192 www.rtgparts.com brayton@rtgparts.com | |||
|
Member |
High quality, light weight rail system for your MP5K, SP5K, SP89, MP5K-RS or clone. This rail system replaces the original handguard and provides a superior mounting option for your lasers, grips, bipods, tactical light or any other accessory based on the Picatinny rail. FAB DEFENSE MP5K ALUMINUM RAIL SYSTEM, $182.70 https://www.robertrtg.com/stor...DEFENSE-124p7004.htm ![]() Best Regards, Brayton RTG Parts 931 Frank Street Sheridan, WY 82801 Office: 307-675-1191 Fax: 307-675-1192 www.rtgparts.com brayton@rtgparts.com | |||
|
Member |
This is the nicest lot of CETME L bayonets we have ever imported and that you can ever hope to find. New old stock in unissued condition. CETME L BAYONET & SCABBARD, $59.95 https://www.robertrtg.com/stor...-SCABBARD-8p7955.htm ![]() Thanks for looking and happy shooting! RTG Parts 931 Frank St. Sheridan, WY 82801 Phone: 307-675-1191 Email: info@rtgparts.com ![]() ![]() Best Regards, Brayton RTG Parts 931 Frank Street Sheridan, WY 82801 Office: 307-675-1191 Fax: 307-675-1192 www.rtgparts.com brayton@rtgparts.com | |||
|
Member |
I tried this out in the shop the other day and really liked the setup on one of our MP5s. For such a lightweight and minimalist setup, the brace was actually quite comfortable. The Knights Armament rail is functional, comfortable, and solid, as you would expect from KAC. Didn't hurt that it looked great too. JMAC CUSTOMS RSA-MP5 M1913 PICATINNY BACK PLATE, $89.95 https://www.robertrtg.com/stor...CUSTOMS-134p7313.htm SB TACTICAL FS1913 FOLDING PICATINNY BRACE, $199.99 https://www.robertrtg.com/stor...ACTICAL-134p6925.htm KAC HK MP5 SP5 RAS HANDGUARD, $344.47 https://www.robertrtg.com/stor...NDGUARD-107p7688.htm ![]() Thanks for looking and happy shooting! RTG Parts 931 Frank St. Sheridan, WY 82801 Phone: 307-675-1191 Email: info@rtgparts.com ![]() ![]() ![]() Best Regards, Brayton RTG Parts 931 Frank Street Sheridan, WY 82801 Office: 307-675-1191 Fax: 307-675-1192 www.rtgparts.com brayton@rtgparts.com | |||
|
Member |
This is the military issue version of the B5 SOPMOD stock. Military style sling attachment points and Government contract markings. For those making Afghanistan or Iraq war era M4's, these are the perfect choice. Comes in original military packaging with military label and cage number. Condition is brand new in original wrapper. MILITARY OVERRUN B5 SYSTEMS SOPMOD MIL-SPEC STOCK, BLACK, $94.95 https://www.robertrtg.com/stor...OCK-BLACK-6p8637.htm ![]() MILITARY OVERRUN B5 SYSTEMS SOPMOD MIL-SPEC STOCK, FDE, $94.95 https://www.robertrtg.com/stor...STOCK-FDE-6p8638.htm ![]() Best Regards, Brayton RTG Parts 931 Frank Street Sheridan, WY 82801 Office: 307-675-1191 Fax: 307-675-1192 www.rtgparts.com brayton@rtgparts.com | |||
|
Member |
Romanian made AK47-AKM 75rd drum new. Will work for all 7.62x39mm AK style weapons that take standard magazines. Also check out our Soviet AK47 75rd Drum Magazine Pouch. Canvas and Leather Pouch for European AK47 75rd Drum Magazines. Cold war era Soviet surplus. New old stock condition. Only a few available. ROMANIAN AK47 75RD 7.62x39 DRUM MAG NEW, $129.87 https://www.robertrtg.com/stor...OMANIAN-164p6349.htm ![]() SOVIET AK47 75RD DRUM MAGAZINE POUCH, $9.95 https://www.robertrtg.com/stor...INE-POUCH-4p1639.htm ![]() Best Regards, Brayton RTG Parts 931 Frank Street Sheridan, WY 82801 Office: 307-675-1191 Fax: 307-675-1192 www.rtgparts.com brayton@rtgparts.com | |||
|
Member |
New old stock, Soviet Surplus, AKM AK47 AK74 laminated wood buttstock. This is the correct stock for a stamped receiver AK which has one tang. Nice lacquer finish. Unissued old stock, cold war era production. Still brand new but expect storage and transit marks from decades of storage. Each stock has ONE tang cut for the upper tang of a stamped receiver's rear stock trunnion. Only a few in stock. SOVIET SURPLUS AKM/AK47/AK74 LAMINATED BUTTSTOCK, $89.95 https://www.robertrtg.com/stor...T-SURPLUS-4p8643.htm ![]() New old stock, Soviet Surplus, AKM AK47 AK74 laminated wood buttstock without hardware. This is the correct stock for a stamped receiver AK which has one tang. Wood is brand new and unissued, no hardware included. Unissued old stock, cold war era production. Still brand new but expect storage and transit marks from decades of storage. Each stock has ONE tang cut for the upper tang of a stamped receiver's rear stock trunnion. Only a few in stock. SOVIET SURPLUS AKM/AK47/AK74 LAMINATED BUTTSTOCK WITHOUT HARDWARE, $39.95 https://www.robertrtg.com/stor...DWARE-NOS-4p8644.htm ![]() New old stock, Soviet Surplus, AKM AK47 AK74 laminated wood buttstock without hardware. This is the correct stock for a stamped receiver AK which has one tang. Wood is brand new and unissued, no hardware included. These are not as nice as our other new old stock offering. Wood got damp or otherwise dirty, which has discolored the wood (as pictured). Unissued old stock, cold war era production. Still brand new but expect storage and transit marks from decades of storage. Each stock has ONE tang cut for the upper tang of a stamped receiver's rear stock trunnion. Only a few in stock. SOVIET SURPLUS AKM/AK47/AK74 LAMINATED BUTTSTOCK WITHOUT HARDWARE, DIRTY, $29.95 https://www.robertrtg.com/stor...DIRTY-NOS-4p8646.htm ![]() Thanks for looking and happy shooting! RTG Parts 931 Frank St. Sheridan, WY 82801 Phone: 307-675-1191 Email: info@rtgparts.com ![]() ![]() ![]() ![]() ![]() ![]() Best Regards, Brayton RTG Parts 931 Frank Street Sheridan, WY 82801 Office: 307-675-1191 Fax: 307-675-1192 www.rtgparts.com brayton@rtgparts.com | |||
|
Member |
The AC-Unity 30rd clear magazines are impact resistant, lightweight, and highly reliable. Mag body, follower, mag insert and baseplate are all translucent, offing a very unique look. Made from an advanced, German made polymer-resin that is light weight and extremely shock resistant. The body is impact resistant through a wide range of temperatures. This polymer is exclusive to AC-Unity and gives these mags a huge edge in weight and durability. Carbon wire spring has a lifetime warranty against corrosion and will not degrade from use or loaded storage. Lifetime warranty against defect, loss of spring strength or corrosion. AC-UNITY AK 30RD 5.56x45MM CLEAR MAGAZINE, $14.95 https://www.robertrtg.com/stor...-AC-UNITY-4p8482.htm ![]() AC-UNITY AR 30RD 5.56x45MM CLEAR MAGAZINE, $12.95 https://www.robertrtg.com/stor...-AC-UNITY-6p8648.htm ![]() Best Regards, Brayton RTG Parts 931 Frank Street Sheridan, WY 82801 Office: 307-675-1191 Fax: 307-675-1192 www.rtgparts.com brayton@rtgparts.com | |||
|
Member |
SIG P320 FLAT TRIGGER, $41.95 https://www.robertrtg.com/store/pc/377p8033.htm ![]() SIG P320 FLAT SKELETONIZED ENHANCED STAINLESS STEEL TRIGGER, $99.99 https://www.robertrtg.com/store/pc/377p8032.htm ![]() Best Regards, Brayton RTG Parts 931 Frank Street Sheridan, WY 82801 Office: 307-675-1191 Fax: 307-675-1192 www.rtgparts.com brayton@rtgparts.com | |||
|
Member |
German Hensoldt Z-24 4x28 optics kit. This was the last and most advanced scope issued for the HK G3. 4 power crystal clear optics with bullet drop compensator to 600 meters and the option of reticle illumination (when used with a crosshair illuminator). This kit includes Hensoldt Z-24 scope, HK claw mount, lens covers and case. Each include a small tool kit or cleaning kit, exact accessories vary from kit to kit. As shown in the last image; the hardshell cases have cracks but are in working condition. The scopes are in excellent condition. This scope will not work on a gun that has a welded top rail. These are the nicest Z24 optics we have seen for many years. Surplus excellent condition and in perfect working order. These kits were obviously taken from unissued guns. The white powder in the images is long-term protective 'stuff' that the Germans put on anything rubbery. If you want a new scope case we have the later style German camo cases in stock. This was an improved version that won't crack like the earlier hardshells, SKU: HKK-1015. HENSOLDT Z-24 OPTIC KIT, EXCELLENT, $799.99 https://www.robertrtg.com/stor...EXCELLENT-2p2356.htm ![]() Thanks for looking and happy shooting! Darwin Nercesian RTG Parts 931 Frank St. Sheridan, WY 82801 Phone: 307-675-1191 Email: darwin@rtgparts.com ![]() ![]() ![]() ![]() ![]() ![]() ![]() Best Regards, Brayton RTG Parts 931 Frank Street Sheridan, WY 82801 Office: 307-675-1191 Fax: 307-675-1192 www.rtgparts.com brayton@rtgparts.com | |||
|
Member |
The Binary Firing System GEN 3 (BFSIII) is a 3-position trigger. In position 3 it fires one round on pull and one round on release, making it the fastest semi-automatic trigger on the market. This trigger is ideal for both tactical and competition use. The BFSIII provides greatly reduced split times between rounds, allowing for tighter groups. FRANKLIN ARMORY BFSIII CZ-C1 BINARY TRIGGER KIT FOR CZ SCORPION, $449.00 https://www.robertrtg.com/stor...CORPION-216p7045.htm ![]() Best Regards, Brayton RTG Parts 931 Frank Street Sheridan, WY 82801 Office: 307-675-1191 Fax: 307-675-1192 www.rtgparts.com brayton@rtgparts.com | |||
|
Member |
Polish WZ78 Tantal 'Pallad' handguard. Allows the pallad grenade launcher to be mounted onto the WZ78 Tantal rifle. This hard to find Polish Tantal accessory gives a great feel and unique look to any AK AKM AK74 style rifle. Colors vary. This listing is for Orange shades of bakelite. TANTAL PALLAD HANDGUARD, POLISH RADOM, ORANGE BAKELITE, $129.95 https://www.robertrtg.com/stor...-BAKELITE-4p8657.htm ![]() Best Regards, Brayton RTG Parts 931 Frank Street Sheridan, WY 82801 Office: 307-675-1191 Fax: 307-675-1192 www.rtgparts.com brayton@rtgparts.com | |||
|
Member |
Beautiful threaded barrel for your SIG P320 or M17 9mm. Grey Ghost Precision, GGP320 Full Size, Match Grade Barrel, Fits Sig Sauer P320 Full Size, 9MM, Threaded, 1/2 x 28 RH, 416R Stainless Steel, TiN Coated. SIG P320 FULL SIZE MATCH GRADE THREADED BARREL 1/2x28, TIN, GREY GHOST PRECISION, $187.19 https://www.robertrtg.com/stor...ECISION-216p8660.htm ![]() Best Regards, Brayton RTG Parts 931 Frank Street Sheridan, WY 82801 Office: 307-675-1191 Fax: 307-675-1192 www.rtgparts.com brayton@rtgparts.com | |||
|
Member |
CMMG, AR Conversion Kit, 22LR, Stainless Steel Bolt Group, 3 Magazines, 25Rd CMMG AR CONVERSION KIT 22LR, STAINLESS BOLT, THREE 25RD MAGAZINES, $189.99 https://www.robertrtg.com/stor...MAGAZINES-6p8661.htm ![]() Best Regards, Brayton RTG Parts 931 Frank Street Sheridan, WY 82801 Office: 307-675-1191 Fax: 307-675-1192 www.rtgparts.com brayton@rtgparts.com | |||
|
Member |
The new FAL Fusion Magazine is now available after years of design & testing. Austrian made leather dual mag pouch for FAL 20rd metric mags. Will also work with L1A1, G3, M14 and other similar sized magazines. DSA FAL SA58 20RD MAGAZINE - NEW, $19.95 https://www.robertrtg.com/stor...AZINE-NEW-9p7455.htm ![]() FAL LEATHER DUAL MAG POUCH, AUSTRIAN G-VG, $4.95 https://www.robertrtg.com/stor...RIAN-G-VG-9p3324.htm ![]() Thanks for looking and happy shooting! RTG Parts 931 Frank St. Sheridan, WY 82801 Phone: 307-675-1191 Email: darwin@rtgparts.com ![]() ![]() ![]() ![]() ![]() ![]() Best Regards, Brayton RTG Parts 931 Frank Street Sheridan, WY 82801 Office: 307-675-1191 Fax: 307-675-1192 www.rtgparts.com brayton@rtgparts.com | |||
|
Powered by Social Strata | Page 1 2 3 4 5 6 ... 23 |
![]() | Please Wait. Your request is being processed... |
|