SIGforum.com    Main Page  Hop To Forum Categories  Classifieds Section    WTS: BACK IN STOCK! GHW MOD1C, MOD1 FOLDING STOCK FOR MP5 & MP5K
Page 1 ... 17 18 19 20 21 
Go
New
Find
Notify
Tools
Reply
  
WTS: BACK IN STOCK! GHW MOD1C, MOD1 FOLDING STOCK FOR MP5 & MP5K Login/Join 
Member
posted Hide Post
Sons of Liberty Gun Works, EXO3 Complete Upper, 5.56 NATO / .223 Remington, 16" Combat Barrel, 1:7" Twist, QPQ Finish, Black, 15" EXO3 M-LOK Handguard, A2 Flash Hider

5.56NATO/223 Remington
Complete Upper Receiver
16" Combat Barrel
15" EXO3 Handguard
A2 Flash Hider

Sons of Liberty Gun Works believes in Quality Mil-Spec or better parts. They believe there is no substitute for quality and that your gun should be built right the first time, ready for hard use right out of the box. They believe a quality, accurate and long lasting barrel is the heart of a Combat Grade weapon. They believe in properly tuned weapons using the correct gas system length and quality buffer system components. All of these beliefs are forged together to bring you the SOLGW EXO3 Complete Upper with 16" 5.56 NATO Barrel and an A2 Flash Hider. Featuring the EXO3 Handguard. They believe in their products and back them up with a Lifetime Warranty.

*Does not include a BCG or Charging Handle.

SONS OF LIBERTY GUN WORKS EX03 UPPER, 5.56NATO/.223, 16", $712.50
https://www.robertrtg.com/stor...-16-INCH-6p10557.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 414 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Ultra-Compact PDW Stock
Reinforced polymer construction
Reduced size ideal for PDW platforms
Internal release latch feature mitigates rattle and wobble
Ambidextrous shielded adjustment lever
Angled toe for easy shouldering
Non-slip rubber butt-pad
1.25" ambidextrous sling loop
Accepts M-LOK QD Sling Mount for QD sling swivel capability
Made in the USA.

The MOE SL-M Carbine Stock - Mil-Spec is a drop-in replacement buttstock for AR15/M4 Mil-Spec carbine buffer tubes. It was specifically developed for ultra-compact, PDW-style military platform requirements and for users desiring a smaller, lighter stock. Similar to the SL-K, the SL-M features a shorter and slimmer profile that is optimized for PDW-length receiver extensions. With its small, non-slip rubber butt-pad and an angled toe, the SL-M was engineered to support shoulder transitions, even while wearing body armor and modular gear. It includes a unique, ambidextrous release latch that is shielded to prevent accidental deployment and minimizes rattle on the receiver extension without requiring additional locks, levers, or springs. The 1.25" footman's loop accepts an optional M-LOK QD Sling Mount for push-button style QD sling swivels.

MAGPUL MOE SL-M CARBINE STOCK MIL-SPEC, BLK, $42.70
https://www.robertrtg.com/stor...EC-BLACK-6p10518.htm


MAGPUL MOE SL-M CARBINE STOCK MIL-SPEC, FDE, $42.70
https://www.robertrtg.com/stor...SPEC-FDE-6p10591.htm


MAGPUL MOE SL-M CARBINE STOCK MIL-SPEC, ODG, $42.70
https://www.robertrtg.com/stor...SPEC-ODG-6p10592.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 414 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Bushmaster XM15 E2S QRC Quick Response Carbine Barrel, 16" 5.56 NATO, 1:8 Twist

These barrels were produced just prior to the Remington bankruptcy which saw Bushmaster rifle production come to a screeching halt. If you want a top of the line barrel at a heavily discounted price, then this is for you! We snatched them up and are making them available to you at never before seen prices while supplies last!

Brand: Bushmaster
Barrel Length: 16" Cold Hammer Forged
Barrel Thread Pitch: 1/2" x 28 TPI
Caliber: 5.56x45mm
Twist Rate: 1:8
Finish / Color: Black
Gas System Length: Carbine
Material: 4150 Steel, Salt Bath Nitride
Models Fit: AR-15, XM15 E2S QRC Direct Replacement

NOTE: IT IS POSSIBLE THAT WE MAY MISS CERTAIN DETAILS IN THE DESCRIPTION. PLEASE STUDY ALL PICTURES CAREFULLY SO YOU KNOW EXACTLY WHAT YOU ARE PURCHASING.

BUSHMASTER XM15 E2S QUICK RESPONSE CARBINE 16 INCH 5.56 NATO BARREL, 1:8 TWIST
https://www.robertrtg.com/stor...-8-TWIST-6p10602.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 414 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Sig Sauer Tango MSR LVPO Rifle Scope, 1-6X24mm Second Focal Plane, 30mm Maintube, MSR-BDC6 Illuminated MOA Reticle, Black, Includes ALPHA-MSR Cantilvered Mount

You won't find a better combination of quality and value anywhere.

1-6x24mm
30mm main tube
Second Focal Plane
Side focus
Includes ALPHA-MSR 1 piece aluminum 1.53" high cantilever mount
Absolute co-witness height when mounted.

Introducing the TANGO-MSR line of riflescopes by Sig Sauer. Featuring three new low power variable optics loaded with standard features and offered at an incredible value. These new models include illuminated reticles, factory installed flip-back lens covers, removable thread-in magnification throw levers and the impressive ALPHA-MSR cantilever mount. The TANGO-MSR follows the TANGO6T 1-6x24mm riflescope's acclaimed lineage. Built in Wilsonville, Oregon, the TANGO6T has been the winner of three consecutive US military contracts: the Squad Designated
Marksman Riflescope (SDMR), the Squad Variable Powered Scope (S-VPS) and the Direct View Optic (DVO) programs.

SKU: SOTM61000
FOCAL PLANE: Second
RETICLE: MSR BDC6
ADJUSTMENT INCREMENTS: 0.5 MOA
WEIGHT: 18.5 oz.
MAINTUBE DIAMETER: 30 mm
TRAVEL PER ROTATION: 44 MOA
FIELD OF VIEW LOW (FT @ 100 YARDS): 124.8
FIELD OF VIEW HIGH (FT @ 100 YARDS): 19.6
EYE RELIEF LOW (IN): 3.93
EYE RELIEF HIGH (IN): 3.74
EXIT PUPIL LOW (MM): 10.5
EXIT PUPIL HIGH (MM): 4.5
DIOPTER ADJUSTMENT RANGE: +/- 2.5
WATERPROOFING: IPX 7
OBJECTIVE OUTER DIAMETER: 30 mm
ILLUMINATION SETTINGS: 11
TOTAL ELEVATION TRAVEL: > 100 MOA
TOTAL WINDAGE TRAVEL: > 100 MOA
BATTERY: (1) CR2032
OBJECTIVE LENS DIAMETER (MM): 24 mm
COLOR: Black
MAGNIFICATION: 1-6x
ILLUMINATION: Yes

SIG TANGO MSR LPVO 1-6x24 SFP, 30MM TUBE, MSR-BDC6 ILLUMINATED MOA RETICLE, $329.99
https://www.robertrtg.com/stor...-RETICLE-8p10600.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 414 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Sig Sauer Tango MSR LVPO Rifle Scope, 1-8X24mm Second Focal Plane, 30mm Maintube, MSR-BDC8 Illuminated MOA Reticle, Black, Includes ALPHA-MSR Cantilvered Mount

Industry-leading light transmission and optical clarity for any situation.

1-8x24mm
30mm main tube
Second Focal Plane
Side focus
Includes ALPHA-MSR 1 piece aluminum 1.53" high cantilever mount
Absolute co-witness height when mounted.

Introducing the TANGO-MSR line of riflescopes by Sig Sauer. Featuring three new low power variable optics loaded with standard features and offered at an incredible value. These new models include illuminated reticles, factory installed flip-back lens covers, removable thread-in magnification throw levers and the impressive ALPHA-MSR cantilever mount. The TANGO-MSR follows the TANGO6T 1-6x24mm riflescope's acclaimed lineage. Built in Wilsonville, Oregon, the TANGO6T has been the winner of three consecutive US military contracts: the Squad Designated
Marksman Riflescope (SDMR), the Squad Variable Powered Scope (S-VPS) and the Direct View Optic (DVO) programs.

SKU: SOTM81000
FOCAL PLANE: Second
RETICLE: MSR BDC8
ADJUSTMENT INCREMENTS: 0.5 MOA
WEIGHT: 18.6 oz.
MAINTUBE DIAMETER: 30 mm
TRAVEL PER ROTATION: 44 MOA
FIELD OF VIEW LOW (FT @ 100 YARDS): 124.8
FIELD OF VIEW HIGH (FT @ 100 YARDS): 19.6
EYE RELIEF LOW (IN): 3.93
EYE RELIEF HIGH (IN): 3.74
EXIT PUPIL LOW (MM): 11
EXIT PUPIL HIGH (MM): 3.4
DIOPTER ADJUSTMENT RANGE: +/- 2.5
WATERPROOFING: IPX 7
OBJECTIVE OUTER DIAMETER: 30 mm
ILLUMINATION SETTINGS: 11
TOTAL ELEVATION TRAVEL: > 100 MOA
TOTAL WINDAGE TRAVEL: > 100 MOA
BATTERY: (1) CR2032
OBJECTIVE LENS DIAMETER (MM): 24 mm
COLOR: Black
MAGNIFICATION: 1-8x
ILLUMINATION: Yes

SIG TANGO MSR LPVO 1-8x24 SFP, 30MM TUBE, MSR-BDC8 ILLUMINATED MOA RETICLE, $399.99
https://www.robertrtg.com/stor...-RETICLE-8p10599.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 414 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post


The new AK-103/AK-104 30rd magazine is now available for your AK47.

The AK marketplace is split between those wanting modern looking, option packed magazines; and those who want no-nonsense, old-school military appearance. For you Mil-Style fans, AC-Unity has your back!

AC-Unity originally developed this AK103/AK-104 magazine with North Weapon of Turkey. North Weapon had set out after many military contracts and AC-Unity was to build an affordable, high quality AK103 style magazine that met or exceeded all military requirements.

We are now able to bring these magazines to the USA.

Stamped steel AK103 baseplate is less bulky and more attractive. Will work better with most mag pouches. Triple detent mag insert for an even greater impact resistance and strength.

The AK013 magazine is highly durable. Made from AC-Unity's exclusive polymer that is light weight and impact resistant through a wide range of temperatures. This advanced polymer gives these mags a huge edge in weight and durability.

Front and rear locking lugs are machined from GD ZN 410 metal legure; this is a specific marine grade metal-alloy that is hardened, anti-magnetic, highly anti-corrosive with great wear properties.

Carbon wire spring has a lifetime warranty against corrosion and will not degrade from use or loaded storage.

Lifetime warranty against defect, loss of spring strength or corrosion.

Specifications:
Magazine Weight (Unloaded): Only 7.0 ounces.
Color: Black
Capacity: 30rd
Cartridge: 7.62x39mm
Follower: standard Soviet style, non-bho
Condition: New
Production: Made in Bosnia and Herzegovina
Fits: Will fit and function in all 7.62x39 AK47 style rifles, carbines and pistols that use standard AK mags.

NEW! AC-UNITY AK103 30RD 7.62x39 MAGAZINE, FITS ALL AK47, $13.95
https://www.robertrtg.com/stor...ALL-AK47-4p10629.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 414 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post


The new AK-12 30rd magazine is now available for your AK74.

This is an affordable, military grade copy of the highly desirable Russian AK12 5.45x39mm magazine.

AC-Unity originally developed this AK12 magazine with North Weapon of Turkey. North Weapon had set out after many military contracts and AC-Unity was to build an affordable, high quality AK12 style magazine that met or exceeded all military requirements.

We are now able to bring these magazines to the USA.

Stamped steel AK12 angled baseplate not only looks great, but protects the lowest point of the magazine where it is most likley to be impacted or abused. The unique AK12 double detent mag insert further protects from harsh impacts and keeps the mag securely locked under impact.

The AK12 magazine is highly durable. Made from AC-Unity's exclusive polymer that is light weight and impact resistant through a wide range of temperatures. This advanced polymer gives these mags a huge edge in weight and durability.

Front and rear locking lugs are machined from GD ZN 410 metal legure; this is a specific marine grade metal-alloy that is hardened, anti-magnetic, highly anti-corrosive with great wear properties.

Carbon wire spring has a lifetime warranty against corrosion and will not degrade from use or loaded storage.

Lifetime warranty against defect, loss of spring strength or corrosion.

Specifications:
Magazine Weight (Unloaded): Only 6.4 ounces.
Color: Black
Capacity: 30rd
Cartridge: 5.45x39mm
Follower: Standard Soviet style, non-bho
Condition: New
Production: Made in Bosnia and Herzegovina
Fits: Will fit and function in all 5.45x39mm AK74 style rifles, carbines and pistols that use standard AK74 magazines.

NEW! AC-UNITY AK12 30RD 5.45x39 MAGAZINE, FITS ALL AK74, $16.95
https://www.robertrtg.com/stor...ALL-AK74-4p10627.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 414 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
AC-Unity, Black Fixed Buttstock, Fits: AKM, Stamped Receiver AK47 and AK74 with Fixed Stock Trunnions.

New fixed black buttstock from AC-Unity. Fits all AKM AK47 AK74 rifles that have fixed stock rear trunnions. This is a direct replacement for existing fixed stocks. Mounting screws are included.

Length: Warsaw length buttstock. Buttpad is slightly thicker than Soviet steel buttpads so these are 3mm longer than Warsaw length surplus stock assemblies including buttpad.

In 2018, AC-Unity was contracted to manufacture AKM replacement buttstocks for an African military refurbish contract. They were awarded production of the stock only, not the mounting hardware or sling loop. As such, the injection molded stock exhibits fantastic functional quality typical of AC-Unity products. The stock even has metal threaded inserts supporting the tang screws. Using modern polymer, the stock is very light and extremely durable.

We intended to bring these to market using Russian style hardware but sourcing the correct stamping's and Russian spec steel has proven impossible since COVID. We punted on the Russian spec hardware and sourced a cost effective alternatives elsewhere.

This stock looks great and is fantastic on the shoulder. The sling loop and screws are not on par with the stock body. They work and get the job done but do not have the cosmetic look that we had desired.

Overall these stocks are an excellent value and quality made to last a lifetime. Due to the sling loop and screws, they are not perfect.

Specifications:
Magazine Weight: Only 11.4 ounces.
Color: Black
Condition: New
Production: Made in Bosnia and Herzegovina

Fits:
AKM and all copies using a fixed stock trunnion.
AK47 stamped receiver with fixed stock trunnion.
AK74 stamped receivers with fixed stock trunnion.
Tantal, Beryl, other AK's using AKM fixed stock trunnion.

AC-UNITY AKM AK47 AK74 BLACK BUTTSTOCK NEW, $34.95
https://www.robertrtg.com/stor...AC-UNITY-4p10628.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 414 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post


Excellent PPS43 Parts kits are now available. Nicest demills we have seen for a long time. See website for full details:

PPS-43 PARTS KIT $129.95
https://www.robertrtg.com/stor...ARTS-KIT-15p8173.htm


PPS-43 9MM BARREL NEW, 12-INCH, $149.95
https://www.robertrtg.com/stor...12-INCH-15p10530.htm


PPS-43 35RD MAGAZINE $14.95
https://www.robertrtg.com/stor...MAGAZINE-14p3787.htm


PPS-43 SLING, $5.95
https://www.robertrtg.com/stor...43-SLING-15p8330.htm


PPSH-41 PPS-43 COMBO TOOL $3.95
https://www.robertrtg.com/stor...BO-TOOL-236p8174.htm


PPS-43 CLEANING ROD, $8.95
https://www.robertrtg.com/stor...ANING-ROD-7p3406.htm


RUSSIAN 1956 PPSh-41 / PPS-43 REPAIR MANUAL, ENGLISH TRANSLATION, $37.95
https://www.robertrtg.com/stor...NSLATION-13p9996.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 414 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
This is the collapsible MP5 brace that everyone has been waiting for. We're excited to have these in stock for you right now, from SB Tactical, the most trusted name in pistol braces.

HK PDW COLLAPSIBLE 3-POSITION BRACE, MP5 SP5 HK53 - SB-TACTICAL, $263.99
https://www.robertrtg.com/stor...ACTICAL-106p6998.htm





Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 414 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Replace your spinning brace with the rigid Tailhook Mod 1 with this adapter.

For those unfortunate souls that have gotten stuck with a brace that is never where you left it, there is hope. We understand that not all braces are equal and if you’re tired of having your brace splayed out in unpredictable angles we can fix it for you and get you equipped with a quality rigid brace that is always where you want it and doesn’t move. As an added bonus, it actually works!

In all seriousness, shooters aren’t stuck with the helicopter brace anymore. Simply unscrew the spin brace and replace it with this adapter. Our adapter is machined from billet aluminum and clamps onto the axle of the rotating brace. There is even a set screw you can use if you like for added rigidity. After installation, the Tailhook Mod 1 will simply mount to the adapter solving your brace dizziness.

This adapter fits both the telescoping Copperhead style brace as well as the folding Rattler style.

GEAR HEAD WORKS TAILHOOK MOD 1 SIG BRACE SPIN FIX, $31.95
https://www.robertrtg.com/stor...PIN-FIX-351p9726.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 414 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post


New G3 length black wide handguard with bipod groove! Perfect fit for your HKG3, HK91 or PTR91 that takes standard G3 length handguards.

Includes a proper heat shield on the inside to protect your hand. The outer design/texture provides a comfortable and confident grip, with four quick disconnect sling sockets, two on the left and two on the right, for use with modern sling options.

Bipod groove for attaching standard HK G3 style steel bipods

Both the metal and polymer these handguards are manufactured from have been in incredibly short supply since the COVID European shut down began in 2020. These will be difficult for us to keep in stock!

AC-UNITY G3 HK91 BLACK WIDE HANDGUARD NEW, $79.95
https://www.robertrtg.com/stor...-AC-UNITY-2p7937.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 414 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Originally posted by Darwin@RTGparts:
Sig Sauer, ROMEO2, Red Dot, 1X, Red Dot, Black, 3 MOA

ROMEO2. The new standard of professional grade.

Specifications:
SKU: SOR21300
UPC: 798681647699
COLOR: Black
CATEGORY: Reflex Sights
ADJUSTMENT INCREMENTS: 1.0 MOA
MAGNIFICATION: 1x
OBJECTIVE LENS DIAMETER (MM): 30 mm
BATTERY: (1) CR2032
RETICLE: 3 MOA Red Dot
OVERALL LENGTH: 1-84 Inch / 46.74 mm
OVERALL WIDTH: 1.32 Inch / 33.53 mm
HEIGHT: 1.12 Inch / 28.45 mm
WATERPROOFING: IPX 7
ILLUMINATION SETTINGS: 12 Daylight / 3 Night Vision
RUN TIME: 25000 Hours at medium setting

SIG ROMEO2 RED DOT 1X30 3 MOA REFLEX SIGHT, OPEN OR CLOSED EMITTER, $699.99
https://www.robertrtg.com/stor...-EMITTER-8p10529.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 414 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
This Uzi repair section is an awesome tool for Uzi builders and gunsmiths.

Aside from the receiver repair section, this includes the rear sight section, but without the front trunnion part of the receiver. You will need to weld on the rounded front section from your kit.

Made in America from high quality steel. This is a beautiful stamping. Semi auto blocking bar is already welded in place! One less step for you.

The manufacturer will only produce this blank with the semi auto block installed. For an NFA build it can be easily removed. For semi builds expect some excess weld on the inside of the semi block that will need to be cleaned up. The stamping quality is superb but the manufacturer is not a welder by trade.

UZI RECEIVER REPAIR SECTION, $79.99
https://www.robertrtg.com/stor...SECTION-161p4277.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 414 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Brand new, genuine German HK production threaded barrel for your HK USP-T .45ACP pistol. 5.09" overall length

Fits the USP45 and is the correct replacement barrel for the USP45 Tactical. (Will not fit the USP45 Expert.)

Threaded 16x1mm LH
Barrel Length 5.09 Inch
Cold Hammer Forged
Polygonal Rifling

ORIGINAL HK, MADE IN GERMANY

CONDITION: NEW

HK PART NUMBER 226349

HK USP-T .45ACP 5.09" BARREL NEW, THREADED 16X1MM LH, GERMAN, $289.95
https://www.robertrtg.com/stor...-GERMAN-222p9326.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 414 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
G3 RECEIVER FLAT, $79.99
https://www.robertrtg.com/stor...IVER-FLAT-2p3995.htm


G3 RECEIVER FLAT AND WELD KIT COMBO, $119.99
https://www.robertrtg.com/stor...KIT-COMBO-2p2164.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 414 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
SMITH & WESSON M&P SHIELD PLUS 9MM 10RD MAGAZINE, $34.95
https://www.robertrtg.com/stor...AGAZINE-14p10680.htm


SMITH & WESSON M&P SHIELD PLUS 9MM 13RD EXTENDED MAGAZINE, $34.95
https://www.robertrtg.com/stor...AGAZINE-14p10681.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 414 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
B5 Systems, CAR 15 Buttstock, Black

Great new retro CAR 15 stock from B5 Systems. Give your retro AR the proper look and feel with this light weight and correct looking Mil-Spec Carbine stock.

B5 SYSTEMS CAR 15 BUTTSTOCK, $24.95
https://www.robertrtg.com/stor...UTTSTOCK-6p10682.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 414 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Midwest Industries Sig MCX 12.5" Legacy Handguard M-LOK

Fits Legacy MCX only will not work with MCX Virtus
Advanced ergonomic shape improves the feel and handling of your MCX
Easy no gunsmith installation
Features 46 full M-Lok compatible slots for maximum versatility
Weighs only 7.8 ounces
Length 12.5 inches/ Width 1.67 inches/ OAL height 2.6 inches/ Grip Height 2.4 inches/ Internal Diameter 1.46 inches
Lightweight rugged construction of 6061 aluminum, hard coat anodized for a lifetime of service
Heat treated 4140 retaining clip with phosphate finish
Includes one five slot M-Lok compatible rail section
Patent pending
100% Made in the U.S.A., MI Lifetime Warranty

MIDWEST INDUSTRIES SIG MCX 12.5 INCH LEGACY HANDGUARD M-LOK, $179.99
https://www.robertrtg.com/stor...D-M-LOK-15p10695.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 414 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
SIG ROMEO8 RED DOT SIGHT, BALLISTIC CIRCLE DOT, 1x38MM, 65MOA & 2MOA, TITANIUM PROTECTIVE SHROUD, $599.99
https://www.robertrtg.com/stor...VE-SHROUD-8p8891.htm


SIG ROMEO8 RED DOT SIGHT, BALLISTIC CIRCLE DOT, 1x38MM, 65MOA & 2MOA, TITANIUM PROTECTIVE SHROUD, FDE, $609.99
https://www.robertrtg.com/stor...HROUD-FDE-8p9291.htm


SIG ROMEO8 RED DOT SIGHT, BALLISTIC CIRCLE DOT, 1x38MM, 68MOA & 2MOA, NO SHROUD, $499.99
https://www.robertrtg.com/stor...NO-SHROUD-8p9144.htm


Best Regards,
Brayton
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
brayton@rtgparts.com
 
Posts: 414 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
  Powered by Social Strata Page 1 ... 17 18 19 20 21  
 

SIGforum.com    Main Page  Hop To Forum Categories  Classifieds Section    WTS: BACK IN STOCK! GHW MOD1C, MOD1 FOLDING STOCK FOR MP5 & MP5K

© SIGforum 2022