SIGforum.com    Main Page  Hop To Forum Categories  Classifieds Section    WTS: DPMS 16 INCH 5.56 NATO BARREL, 1:9 TWIST, F MARKED A-FRAME FSB AND BARREL NUT, $134.99
Page 1 ... 16 17 18 19
Go
New
Find
Notify
Tools
Reply
  
WTS: DPMS 16 INCH 5.56 NATO BARREL, 1:9 TWIST, F MARKED A-FRAME FSB AND BARREL NUT, $134.99 Login/Join 
Member
posted Hide Post
Limited Edition Alien Green Lancer L5 Advanced Warfighter Magazine.

Lancer set out to engineer a better magazine; one with the reliability of steel, durability of polymer and weight of aluminum - the L5AWM. The magazine design includes a one-piece, wrap-around steel feed lip assembly and an aggressive surface texture to create the ultimate hybrid magazine tough enough for military, LE and commercial use. The internal geometry of the Advanced Warfighter Magazine is a constant curvature utilizing a non-tilting follower for reliable feeding. The body and component materials are corrosion and chemical resistant, passing military chemical testing.

Features:
Hardened Steel Feed Lips
Non-Tilt Follower
Stainless Steel Spring
Translucent Polymer
Aggressive Texturing

LANCER L5AWM 30RD ALIEN GREEN TRANSLUCENT MAG, 5.56MM / .223REM, $18.99
https://www.robertrtg.com/stor...M-223REM-6p10403.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Fime Group, Fire Control Group, AK/RPK Trigger, Fits AK/RPK Rifles with Stamped Receivers, Includes - Trigger, Hammer, Disconnector, Disconnector Spring, Stopper, and Sleeve, Black

FIME Group has spent over a year engineering their new 2-stage trigger. It is an American made mil-spec trigger. It comes completely assembled and it delivers a drop-in construction. It was produced with mil-spec ratings on the steel, hardening, and has a black oxide protective coating. This trigger was created to perform if you were in combat, competition shooting, training, or plinking on the range. While others try to reverse engineer the trigger, they work directly from country of origin. FIME Group design delivers a shorten trigger pull with a light trigger pull. The disconnector's face makes a full contact with the hammer to provide a secure lockup. The disconnector's tail touches with the rear receiver rivet and the hammer retarder eliminates the transfer of energy called "trigger slap" which can be experienced from inferior products. They won't make compromises on quality yet it is being offered at a price point to match all others.

Specifications
SKU: FM-922US
Length of Travel: .3 in
Reset Travel: .15 in
Take up: 5.0 lbs
Trigger Break: 6.0 lbs
Weight: 2.96 oz

FIME GROUP AK RPK TRIGGER KIT, $47.99
https://www.robertrtg.com/stor...GGER-KIT-4p10401.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
G3K 33K 4.8 INCH 4-PRONG FLASH HIDER, RCM, $99.95
https://www.robertrtg.com/stor...HIDER-RCM-2p4478.htm


G3K 33K 4.8 INCH 4-PRONG MUZZLE BRAKE, RCM, $99.95
https://www.robertrtg.com/stor...BRAKE-RCM-2p4479.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Sig Sauer, Low Profile Stock Assembly, Magpul SK-K Stock, Side Folding, Fits MCX/MPX, Low Profile Tube, 1913 Interface, Black

Fits MPX/MCX Platform
Magpul SL-K Stock
Side Folding
1913 Picatinny Compatible

This assembly includes everything you need to add or replace your MPX or MCX stock with a folding buffer tube and the Magpul SL-K Stock.

SIG SAUER LOW PROFILE SIDE FOLDING MAGPUL SK-K STOCK, MPX / MCX, 1913 INTERFACE, BLACK, $179.95
https://www.robertrtg.com/stor...E-BLACK-20p10452.htm



Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Sig Sauer, P320 PROCUT Slide Assembly, XRAY3 Sights, R2 Optic Ready, Compatible with 3.9" 9MM Barrel, Black Finish

Stylized relief cuts
XRAY3 Night Sights
Cut for Romeo1Pro

This factory replacement PRO-CUT, optic ready, slide assembly is cut for the Romeo1Pro and covered by a removable sight plate.

This slide is for 9mm barrels only and is not compatible with .40, .357, or .45

This product is the SLIDE as pictured (barrel, and recoil assembly are not included)

SIG P320 PRO-CUT SLIDE, XRAY3 SIGHTS, R2 OPTICS READY, 3.9 INCH, BLACK, $369.99
https://www.robertrtg.com/stor...-BLACK-216p10464.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
German HK MP5, SP5, SP5K 30rd curved magazines. These are current production and brand new in original wrap. Stamped Made in Germany.

This MP5 30rd mag fits all HK MP5/SP5/HK94/SP89/SP5K/MP5K, MKE, BW5, SW5, CA94 and other HK 9mm clones.

ORIGINAL HK, MADE IN GERMANY

CONDITION: NEW

HK PART NUMBER 206349S

ON SALE! MP5 SP5 SP5K 30RD CURVED MAG NEW, GERMAN, $68.95
https://www.robertrtg.com/stor...-GERMAN-129p4150.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Sig Sauer Grip Module Assembly, Fits Sig P320F 9/40, TXG, Small, Grey

Brand new in box. Original OEM factory SIG production.

SIG PART NUMBER: 8900273
SIG SKU: 798681632237
CONDITION: New in box
COLOR: Grey

SIG GRIP MODULE FOR P320F 9/40, TXG, SMALL, GREY, $224.95
https://www.robertrtg.com/stor...L-GREY-216p10468.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Sig Sauer, P320 PROCUT Slide Assembly, XRAY3 Sights, R2 Optic Ready, Compatible with 3.9" 9MM Barrel, Black Finish

Stylized relief cuts
XRAY3 Night Sights
Cut for Romeo1Pro

This factory replacement PRO-CUT, optic ready, slide assembly is cut for the Romeo1Pro and covered by a removable sight plate.

This slide is for 9mm barrels only and is not compatible with .40, .357, or .45

This product is the SLIDE as pictured (barrel, and recoil assembly are not included)

SIG P320 PRO-CUT SLIDE, XRAY3 SIGHTS, R2 OPTICS READY, 3.9 INCH, BLACK, $369.99
https://www.robertrtg.com/stor...-BLACK-216p10464.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
New and Unissued! Polish military production AK47, early style telescoping recoil assembly complete. This is the correct recoil rod assembly for your milled receiver AK. Also a perfect assembly for your stamped AK style AK. Top quality milled production from on of the best Soviet producers.

These fit and function on any AK but offer better construction than later stamped or cast parts. You can't find a nicer recoil assembly anywhere!

As these are unissued they have no serial number.

Will work on all European AK47, AKM and AK74 rifles. This is a valuable spare your AK will need at some point in the future.

AK47 RECOIL ASSEMBLY NEW, EARLY MILLED PRODUCTION, $49.99
https://www.robertrtg.com/stor...RODUCTION-4p1587.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
A great product for those wanting all the 'preban' features without sacrificing good ergonomics and comfort while shooting. Rock solid folding stocks made by Choate. Choate also manufactures this same stock for HK Germany which sells them to militaries and police around the globe.

These are the high quality military grade folders. Each folding stock comes new in wrap and counts as one U.S. 922r compliance part. For those with post 89 rifles and part counts this is a big plus! Choate folders will fit all HK91, G3, PTR91, Cetme, C308 and other G3 clone rifles.

HKG3 91 PTR CHOATE FOLDING STOCK NEW IN WRAP, $109.00
https://www.robertrtg.com/stor...W-IN-WRAP-2p2053.htm


HK G3 91 PTR RECOIL ASSEMBLY COMPLETE, SURPLUS VG, $23.95
https://www.robertrtg.com/stor...URPLUS-VG-2p1987.htm


HK G3 91 BUFFER COMPLETE, GERMAN, $6.95
https://www.robertrtg.com/stor...TE-GERMAN-2p2051.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Sig Sauer, TANGO6T, Rifle Scope, 1-6X24mm, First Focal Plane DWLR-556 Reticle, .2 MRAD, 30mm Main Body Tube, Matte Finish, Flat Dark Earth, Includes 1.535" ALPHA4 Titanium Mount, Removable Throw Lever and Lay Flat Flip Back Lens Covers, US Military Over Run Units

First Focal Plane DWLR-556 Reticle
Includes 1.535" ALPHA4 Mount with Titanium Hardware, Throw Lever and Scope Caps
IPX-8 Waterproofing
U.S. Military Over Run units

This is my favorite SDMR style optic. I use these on all of our SCAR rifles. This scope is idiot proof and the reticle drop points are super easy to use.

Selected by the U.S. Army for both the Squad Designated Marksman Rifle System and for U.S. Special Forces, the TANGO6T is available in the commercial market. Designed for today's common MSR/AR and bolt action platforms, this scope is the ideal solution for CQB / mid-range tactical engagements, 3 Gun competitions and hunting. The TANGO6T is complete with the HDX optical system for extreme clarity and low-light performance, HellFire fiber optic and glass-etched illuminated reticles, and first or second focal plane designs.

HDX optics extra-low dispersion glass (ED) combined with high transmittance glass (HT) provide industry-leading light transmission and optical clarity for any situation
6x Super-Zoom Advanced Optical System
Fast Focus Eyepiece
Night Vision (NV) Illuminated reticle settings with locking illumination dial
Laser engraved mounting line to align riflescope to scope rings
Dependable waterproof (IPX-8 rated for complete and continuous immersion at 20 meters ) and fog-proof performance
Power selector ring throw lever included with all models
Covered by SIG SAUER's INFINITE Guarantee and Electronics Limited Warranty, see website for full details.
Assembled in SIG SAUER optics factory in Wilsonville, Oregon, USA

Specifications:

Retail Price: $2,199.99
SKU: SOT61DVO
FOCAL PLANE: First (FFP)
RETICLE: Dual Windhold Long Range Reticle (DWLR6)
ADJUSTMENT INCREMENTS: 0.2 MRAD
WEIGHT: 22.1
MAINTUBE DIAMETER: 30 mm
TRAVEL PER ROTATION: 20 MRAD
PARALLAX SETTING: 300 Meters
FIELD OF VIEW LOW (FT @ 100 YARDS): 105.8
FIELD OF VIEW HIGH (FT @ 100 YARDS): 17.7
EYE RELIEF LOW (IN): 3.9
EYE RELIEF HIGH (IN): 4.1
EXIT PUPIL LOW (MM): 11.4
EXIT PUPIL HIGH (MM): 4
DIOPTER ADJUSTMENT RANGE: +/- 2.5
WATERPROOFING: IPX 8
OCULAR OUTER DIAMETER (IN): 1.81
OBJECTIVE OUTER DIAMETER (IN): 1.18
INTERNAL GAS PURGE: Argon
ILLUMINATION SETTINGS: 9 Daylight / 2 NV
EYE RELIEF LOW (IN): 3.9
TOTAL ELEVATION TRAVEL: 31 MRAD
TOTAL WINDAGE TRAVEL: 31 MRAD
BATTERY: (1) CR2032
OBJECTIVE LENS DIAMETER (MM): 24 mm
COLOR: FDE
MAGNIFICATION: 1-6x
ILLUMINATION: Yes

MILITARY OVER RUN SIG TANGO6T 1-6x24, FFP, DWLR6-556, ALPHA4 TITANIUM MOUNT, $2199.99
https://www.robertrtg.com/stor...UM-MOUNT-8p10502.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Heckler & Koch MR556 HK416 AR15 30RD 5.56MM / .223 Steel Magazine, New

Designed to provide optimum ammunition feeding for any M16/M4/AR15-type weapon, the Heckler & Koch 30-Round Steel Magazine can be used in any firearm that uses a NATO-standard 5.56 mm magazine. Originally developed by HK for the British L85 (SA80) & L86 weapons, this curved 30-round magazine has been combat-proven by U.S. special operations forces and foreign military units. The 30-Round Steel Magazine features a well-executed design; select materials, special anti-friction maritime surface finish, advanced spring material, attention to production tolerance, and steel magazine housing and follower.

Length: 7.48 inches (190 mm)
Width: .94 inches (20 mm)
Height: 2.56 inches (165 mm)
Weight (empty): .54 lb. (.25 kg)

In our opinion these are the absolute best quality AR15 mags ever produced.

ORIGIN: MADE IN GERMANY
CONDITION: NEW IN WRAP
HK PART NUMBER: 251770S

HK MR556 HK416 AR15 30RD 5.56MM / .223 STEEL MAGAZINE, NEW, $59.00
https://www.robertrtg.com/stor...INE-NEW-223p4298.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Bushmaster 14.5" M4 SOCOM Profile Barrel, 1:7 Twist Rate, A-Frame Front Sight Block With Barrel Nut

These barrels were produced just prior to the Remington bankruptcy which saw Bushmaster rifle production come to a screeching halt. If you want a top of the line barrel at a heavily discounted price, then this is for you! We snatched them up and are making them available to you at never before seen prices while supplies last!

Brand: Bushmaster
Barrel Length: 14.5" Cold Hammer Forged
Barrel Thread Pitch: 1/2" x 28 TPI
Caliber: 5.56x45mm
Twist Rate: 1:7
Finish / Color: Black
Gas System Length: Carbine
Material: 4150 Steel
Models Fit: AR-15

Includes: Barrel, Barrel Nut, A-Frame Front Sight Block (no sight post)

NOTE: IT IS POSSIBLE THAT WE MAY MISS CERTAIN DETAILS IN THE DESCRIPTION. PLEASE STUDY ALL PICTURES CAREFULLY SO YOU KNOW EXACTLY WHAT YOU ARE PURCHASING.

BUSHMASTER 14.5 INCH M4 SOCOM BARREL, 1:7 TWIST, A-FRAME FSB WITH BARREL NUT, $149.99
https://www.robertrtg.com/stor...RREL-NUT-6p10508.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Bushmaster 16" 5.56 NATO Barrel Kit, 1:9 Twist Rate, A-Frame Front Sight Block With Sight Post, Barrel Nut, Delta Ring, Sling Loop, Gas Tube, Handguard and A2 Flash Hider

These barrels were produced just prior to the Remington bankruptcy which saw Bushmaster rifle production come to a screeching halt. If you want a top of the line barrel at a heavily discounted price, then this is for you! We snatched them up and are making them available to you at never before seen prices while supplies last!

Brand: Bushmaster
Barrel Length: 16" Chrome Lined, Cold Hammer Forged
Barrel Thread Pitch: 1/2" x 28 TPI
Caliber: 5.56x45mm
Twist Rate: 1:9
Finish / Color: Black
Gas System Length: Carbine
Material: 4150 Steel
Models Fit: AR-15

Includes: Barrel, Barrel Nut, Delta Ring, A-Frame Front Sight Block with Sight Post Sling Loop, Gas Tube, Handguard and A2 Flash Hider

NOTE: IT IS POSSIBLE THAT WE MAY MISS CERTAIN DETAILS IN THE DESCRIPTION. PLEASE STUDY ALL PICTURES CAREFULLY SO YOU KNOW EXACTLY WHAT YOU ARE PURCHASING.

BUSHMASTER 16" 5.56 NATO BRL KIT, 1:9, FSB WITH SIGHT POST, NUT, DELTA RING, SLING LOOP, GAS TUBE, HANDGUARD, A2 FH, $179.99
https://www.robertrtg.com/stor...SH-HIDER-6p10509.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
Picture of PGT
posted Hide Post
$139? Doesn't show that price.
 
Posts: 2704 | Registered: December 21, 2014Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by PGT:
$139? Doesn't show that price.


The newest item is always the first on the first page. It is actually 139.99. I just corrected it.


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Bushmaster 14.5" 5.56 NATO M4 Barrel, 1:9 Twist Rate, 2 Dimple

These barrels were produced just prior to the Remington bankruptcy which saw Bushmaster rifle production come to a screeching halt. If you want a top of the line barrel at a heavily discounted price, then this is for you! We snatched them up and are making them available to you at never before seen prices while supplies last!

Brand: Bushmaster
Barrel Length: 14.5" Chrome Lined, Cold Hammer Forged
Barrel Thread Pitch: 1/2" x 28 TPI
Caliber: 5.56x45mm
Twist Rate: 1:9
Finish / Color: Black
Gas System Length: Carbine
Material: 4150 Steel
Models Fit: AR-15

NOTE: IT IS POSSIBLE THAT WE MAY MISS CERTAIN DETAILS IN THE DESCRIPTION. PLEASE STUDY ALL PICTURES CAREFULLY SO YOU KNOW EXACTLY WHAT YOU ARE PURCHASING.

BUSHMASTER 14.5 INCH 5.56 NATO M4 BARREL, 1:9 TWIST, 2 DIMPLE, $139.99
https://www.robertrtg.com/stor...2-DIMPLE-6p10514.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Bushmaster 16" 5.56 NATO Barrel, 1:8 Twist Rate, 2 Dimple

These barrels were produced just prior to the Remington bankruptcy which saw Bushmaster rifle production come to a screeching halt. If you want a top of the line barrel at a heavily discounted price, then this is for you! We snatched them up and are making them available to you at never before seen prices while supplies last!

Brand: Bushmaster
Barrel Length: 16" Cold Hammer Forged
Barrel Thread Pitch: 1/2" x 28 TPI
Caliber: 5.56x45mm
Twist Rate: 1:8
Finish / Color: Black
Gas System Length: Carbine
Material: 4150 Steel
Models Fit: AR-15

NOTE: IT IS POSSIBLE THAT WE MAY MISS CERTAIN DETAILS IN THE DESCRIPTION. PLEASE STUDY ALL PICTURES CAREFULLY SO YOU KNOW EXACTLY WHAT YOU ARE PURCHASING.

BUSHMASTER 16 INCH 5.56 NATO BARREL, 1:8 TWIST, 2 DIMPLE, $119.99
https://www.robertrtg.com/stor...2-DIMPLE-6p10515.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
  Powered by Social Strata Page 1 ... 16 17 18 19 
 

SIGforum.com    Main Page  Hop To Forum Categories  Classifieds Section    WTS: DPMS 16 INCH 5.56 NATO BARREL, 1:9 TWIST, F MARKED A-FRAME FSB AND BARREL NUT, $134.99

© SIGforum 2022