SIGforum.com    Main Page  Hop To Forum Categories  Classifieds Section    WTS: DPMS 16 INCH 5.56 NATO BARREL, 1:9 TWIST, F MARKED A-FRAME FSB AND BARREL NUT, $134.99
Page 1 ... 15 16 17 18 19 
Go
New
Find
Notify
Tools
Reply
  
WTS: DPMS 16 INCH 5.56 NATO BARREL, 1:9 TWIST, F MARKED A-FRAME FSB AND BARREL NUT, $134.99 Login/Join 
Member
posted Hide Post
We have a small number of Russian Izhmash proofed AK74 30rd plum magazines in surplus new condition. These durable mags are unissued and in perfect working order.

These have the triangle with arrow proof mark.

Supplies are limited. Stock up while you can.

AK74 30RD PLUM MAGAZINE - IZHMASH RUSSIAN, NEW, $74.95
https://www.robertrtg.com/stor...SIAN-NEW-4p10298.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Finally, the first and only solution to attach your KeyMount/KeyMicro compatible device to your 24-1.5RH threads!

The RRD-360-24F-KM allows you to attach KeyMount/KeyMicro compatible devices to your 24-1.5RH threaded firearm. Previously, this could only be accomplished by having your firearm re-threaded to accept a standard KeyMo device. In addition to the ability to attach a KeyMo device, the RRD-360-24F-KM has external 1.375-24 (X37) threads located at the base which will allow you to attach an extended blast shield in the future.

What makes the 360 unique?

3 baffles to protect your suppressor
No timing / shims not required
Lightweight
Minimal added length
Compatible with dozens of suppressors
Reduced Recoil

Specifications:
24-1.5RH Threads
Overall Length: 2.91"
Lenght Added: 2.08"
10mm Bore
KeyMount and KeyMicro Compatible
Compatible with the Extended Blast Shield (Coming Soon!)
17-4ph Stainless
Black Nitride

PLEASE NOTE: Not rated for use on barrels less than 10" with suppressors during rapid fire or "mag dumps" using supersonic ammunition. Excess heat and pressure on shorter barrels can cause damage to the device/suppressor and potential injury to the shooter.

JMAC CUSTOMS 360 MUZZLE BRAKE 24-1.5 FACEMOUNT, KEYMOUNT (KEYMICRO), $157.46
https://www.robertrtg.com/stor...KEYMICRO-4p10301.htm


JMAC CUSTOMS X37 BRAVO THREAD PROTECTOR, $26.96
https://www.robertrtg.com/stor...ROTECTOR-4p10302.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
The great CZ26, reduced to a parts kit per BATF specs. Perfect for your next build! Kits come as pictured and include on 32rd magazine.

Condition: Most appear to have been NOS prior to demill. So expect a nice kit with the usual damage from decades of storage, transport, demill and more transport.

These Beautiful kits can make great semi-auto's, SBR's or post samples (all NFA rules apply). Barrels in both 9mm and 7.62x25 are available elsewhere online.

CZ26 PARTS KIT WITH ONE 32RD MAGAZINE, $174.95
https://www.robertrtg.com/stor...AGAZINE-15p10289.htm


CZ26 4-MAGAZINE WITH POUCH COMBO, $54.95
https://www.robertrtg.com/stor...H-COMBO-15p10290.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
FAKE SD SUPPRESSOR FOR HK RIFLE CARTRIDGES - U.S. MADE, $149.95

New 15x1 U.S. made SD fake suppressor for rifle cartridges. Perfect for 7.62 or 5.56 caliber weapons using SD shrouds and SD handguards.

FAKE SD SUPPRESSOR FOR RIFLE CARTRIDGES - U.S. MADE, $149.95
https://www.robertrtg.com/stor...-S-MADE-107p3196.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
HK MR762 14.7 Inch M-Lok Handguard New, FDE

New in wrap German Heckler and Koch MLOK Handguard for your MR762 or HK 417

ORIGINAL HK, MADE IN GERMANY

CONDITION: NEW

HK PART NUMBER 51000225

HK MR762 14.7 INCH M-LOK HANDGUARD NEW, FDE, $339.00
https://www.robertrtg.com/stor...-NEW-FDE-6p10309.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Rheinmetall / PB Beretta MG42/59 parts kit. Includes the incredibly rare 1200 gram heavy bolt and heavy buffer for the slowest possible rate of fire in your NFA MG. This is a rare evolutionary MG that bridges the gap between the MG42 & MG3

MG42/59 was a Rheinmetall licensed MG42 variant to be made by Beretta for use by the Italian military. This collaboration resulted in one of the most beautiful beltfeds to come out of Europe. Some parts are marked PB Beretta with Italian proof marks. Other parts have discreet Rheinmetall stamps or Rheinmetall subcontractor markings which are also found on German issued MG1/MG3. These kits were demillled in Italy and are correct issue guns! These are not a hodgepodge of mixed parts, but correct kits out of Italy.

Based solely on looks, the MG42/59 is my favorite version of the MG42. It's not just an evolutionary missing link that bridges the gap between the MG42 and the MG3/MG74. It also doesn't show some of the production cost savings that the later models exhibited. The refined machining of the muzzle cone, front receiver bushing and booster assembly is unique and quite cool looking. Little things like the stamped reinforcements on the locking lever for muzzle cone are super improvements not found on later guns. (More than 60% of the levers that came out of Germany were bent or cracked. These extra little stampings would have benefited the MG3!)

Features:

Licensed by Rhinemetall to be made in collaboration with PB Beretta for Italy
7.62x51mm NATO
Heavy 1200 gram bolt body complete with MG3 style bolt head
Heavy buffer, which is correct and required to safely run the heavy bolt in your NFA MG42/1/3/74
Unique front muzzle area. Looks like a wartime front-end from a few feet away. Up close it is much more interesting.
Unique 2200 meter 7.62NATO sight. (MG42 is 2000m, MG3 is 1200m)
Unique markings throughout
Strengthened locking lever for muzzle cone.
Bipod is a stepping stone between the MG42 and MG3 pods.
Top cover and feed tray are similar to the MG1-A3. Looks like a MG42 from the outside.
We found production dates ranging from 1968 to 1987. We did not check dates on every kit so some may be earlier/later.
Takes standard MG1, MG3, MG74 barrels (barrel not included)
Conditions range from very-good to excellent.
Hand Select? All kits will be shipped first come first served. Best kit will ship to the first order, worst kit will ship to the last order.

Negatives? Yes a couple:

Obviously the price. Many people have paid close to this price for just the heavy bolt and buffer. If you know what these parts are, this kit is a great deal.
Buttstocks run a mix of conditions that do not always match the condition of the kit. Buttstock markings and exact style vary quite a bit. These are what came with the guns when demilled. When placed on a fixed mount it's normal for the buttstock to be removed. Later when the drills are over, the correct buttstock does not alwasy end up on the correct MG.
Receiver is demilled per ATF rules using a wide cutting tourch. For those who have kits from earlier decades, you'll like where the ATF instructed the cuts to be made.
Barrel and barrel extension are not included. They had to be left overseas.
It's a parts kit. We do our best to ensure completeness, but if a tiny bolt or screw is missing, or gets lost under your work bench: you'll have to find a replacement. All the little parts interchange with the MG42/1/3 so they should be easy finds.

Pictures for reference:

Three different, complete parts kits shown in the images. Two of the kits were randomly selected and show average condition. The third kit is the worst kit we have. This kit will ship last. It is shown in image #22, which is the second to last image. Images 20/21 show the variation of the buttstocks.

Thanks for reading and happy shooting!

RHEINMETALL / PB BERETTA MG42/59 PARTS KIT, WITH HEAVY BOLT & HEAVY BUFFER, $2499.00
https://www.robertrtg.com/stor...-BUFFER-17p10316.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Beretta M38/49 9mm parts kit with one 40rd magazine. This Italian army SMG is a modernized decedent of the highly reliable WWII Beretta MAB 38.

Conditions range from surplus good to very-good. After the BATF mandated torch cut, parts that were cut developed some surface rust. This will clean up with some scrubbing and TLC. Overall the kits are in nice condition.

Rare SMG and a rare parts kit. Perfect for your next winter project.

BERETTA M38/49 PARTS KIT, $699.00
https://www.robertrtg.com/stor...RTS-KIT-15p10318.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Sig Sauer, Tango MSR LVPO, Rifle Scope, 1-10X28mm Second Focal Plane, 34mm Maintube, MSR-BDC10 Illuminated MOA Reticle, Black, Includes ALPHA-MSR Cantilvered Mount

Packed with value, Sig really satisfies! Incredible deal on a versatile, tough scope. Check this out:

1-10x28mm
34mm main tube
Second Focal Plane
Side focus
High Performance 10x optical system with low dispersion glass
Integrated thread in throw leaver for quick magnification changes
Illuminated MSR BDC-10 reticle with 11x brightness levels
Lay flat flip-back lens covers included
Dependable waterproof, shockproof, and fog-proof performance
Includes ALPHA-MSR 1 piece aluminum cantilever mount

Introducing the TANGO-MSR line of riflescopes by Sig Sauer. Featuring three new low power variable optics loaded with standard features and offered at an incredible value. These new models include illuminated reticles, factory installed flip-back lens covers, removable thread-in magnification throw levers and the impressive ALPHA-MSR cantilever mount. The TANGO-MSR follows the TANGO6T 1-6x24mm riflescope's acclaimed lineage. Built in Wilsonville, Oregon, the TANGO6T has been the winner of three consecutive US military contracts: the Squad Designated
Marksman Riflescope (SDMR), the Squad Variable Powered Scope (S-VPS) and the Direct View Optic (DVO) programs.

SKU: SOTM11000
FOCAL PLANE: Second
RETICLE: MSR BDC10
ADJUSTMENT INCREMENTS: 0.5 MOA
WEIGHT: 20.4 oz.
MAINTUBE DIAMETER: 34 mm
TRAVEL PER ROTATION: 44 MOA
FIELD OF VIEW LOW (FT @ 100 YARDS): 110
FIELD OF VIEW HIGH (FT @ 100 YARDS): 10
EYE RELIEF LOW (IN): 3.54
EYE RELIEF HIGH (IN): 3.22
EXIT PUPIL LOW (MM): 9
EXIT PUPIL HIGH (MM): 2.8
DIOPTER ADJUSTMENT RANGE: +/- 2.5
WATERPROOFING: IPX 7
OBJECTIVE OUTER DIAMETER: 34 mm
ILLUMINATION SETTINGS: 11
TOTAL ELEVATION TRAVEL: > 100 MOA
TOTAL WINDAGE TRAVEL: > 100 MOA
BATTERY: (1) CR2032
OBJECTIVE LENS DIAMETER (MM): 28 mm
COLOR: Black
MAGNIFICATION: 1-10x
ILLUMINATION: Yes

SIG TANGO MSR LPVO 1-10x28 SFP, 34MM TUBE, MSR-BDC10 ILLUMINATED MOA RETICLE, $463.99
https://www.robertrtg.com/stor...-RETICLE-8p10329.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Galil 5.56x45mm 35rd Magazine. IMI Production, Israeli army issue mags. Perfect for your Galil AR, ARM or SAR.

Condition is surplus very-good to excellent condition. Most appear unissued but have storage/transit marks. Finish color ranges from dark grey to black depending on the year of production.

This is the nicest batch of Galil mags we have seen in a long time!!!

NOT CORRECT FOR A GALIL ACE

GALIL AR ARM SAR 35RD 5.56MM .223 MAGAZINE, SURPLUS EX, $25.99
https://www.robertrtg.com/stor...RPLUS-EX-14p7492.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
PM-63 RAK parts kit complete less barrel. Includes demilled receiver and 1 25rd magazine. No barrel is included.

We put a kit together for display. Sourced a demilled barrel elsewhere to complete the look. It holds itself together good enough to hang on the wall. Can also be made into a semi auto with the correct semi components and a fresh barrel.

PM-63 RAK PARTS KIT WITH 25RD MAGAZINE, $199.95
https://www.robertrtg.com/stor...MAGAZINE-15p8828.htm


PM-63 RAK 25RD MAGAZINE NEW, $14.95
https://www.robertrtg.com/stor...INE-NEW-298p3031.htm


PM-63 RAK 15RD MAGAZINE, $14.95
https://www.robertrtg.com/stor...AGAZINE-298p3030.htm


PM-63 RAK 3-MAG POUCH, $9.95
https://www.robertrtg.com/stor...G-POUCH-298p3361.htm


PM-63 RAK SMG HOLSTER, $19.95
https://www.robertrtg.com/stor...G-HOLSTER-8p3033.htm


PM-63 RAK SMG SLING NEW, $6.95
https://www.robertrtg.com/stor...SLING-NEW-8p3404.htm


PM-63 RAK GRIP, $7.95
https://www.robertrtg.com/stor...RAK-GRIP-15p3293.htm


PM-63 RAK MULTI TOOL, $4.95
https://www.robertrtg.com/stor...ULTI-TOOL-7p3939.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Original Polish Production, PM63, 9x18mm Makarov, Barrel, Surplus Used, Requires Fitting, Read Description

Poland military production PM63 barrels in 'hard to describe' condition.

The rifling is very-good and the bores are chrome lined. These barrels have the proper lands and grooves for 9mm Mak, which US made copies almost never have.

The outside of the barrels show more finish wear but will refinishing nicely.

What is strange is the condition of the fins. It appears these barrels were either roughly stored or some were damaged during a demill process. Normally the barrel fins, even on demilled barrels, are sharp and crisp. These are rough and most will need fitting before they will fit correctly into your receiver. The last three images show you the area we are speaking about.

Gunshow specials are sold AS-IS and don't quality for returns or exchanges.

PM-63 RAK 9X18MM MAKAROV BARREL, POLISH MADE, USED, GUNSMITH SPECIAL, $169.95
https://www.robertrtg.com/stor...-SPECIAL-15p3682.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Gear Head Works 2.5" SCW Tailhook Pistol Brace, Rifle Caliber

The SCW 2.5 Tailhook is by far the most compact PDW Style Pistol Brace that the industry has ever seen, with a collapsed length of 2.5”. While compact, it is still very versatile, allowing for button free brace deployment and 6 length settings. At full extension, length reaches 12.5”, keeping it comfortable and legal within ATF Pistol Brace requirements. The SCW Tailhook 2.5 utilizes the patented Dead Foot Arms LLC Modified Cycle System and a shortened version of the M16A2 Bolt Carrier Group which is sold with the kit. System includes complete Tailhook hook pistol brace, receiver extension, adjustment rail, recoil springs, and MCS Style (shortened) M16A2 bolt carrier group. Brace weight, excluding BCG is 12.8oz

GEAR HEAD WORKS 2.5 INCH SCW TAILHOOK PISTOL BRACE, RIFLE CALIBER, $552.00
https://www.robertrtg.com/stor...-CALIBER-6p10330.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
JMAC Customs 360 Muzzle Brake 26-1.5 Facemount, Keymount, X37

Finally, the first and only solution to attach your KeyMount/KeyMicro compatible device to your Zastava M85/M92!

The RRD-360-26F-KM allows you to attach KeyMount/KeyMicro compatible devices to your 26-1.5LH threaded firearm. Previously, this could only be accomplished by having your firearm re-threaded to accept a standard KeyMo device. In addition to the ability to attach a KeyMo device, the RRD-360-24F-KM has external 1.375-24 threads located at the base which will allow you to attach an extended blast shield.

What makes the 360 unique?
3 baffles to protect your suppressor
No timing / shims not required
Lightweight
Minimal added length
Compatible with dozens of suppressors
Reduced Recoil

Specifications:
26-1.5LH Threads
Overall Length: 2.91"
Lenght Added: 2.08"
10mm Bore
KeyMount and KeyMicro Compatible
Compatible with the TP-37 thread protector
Compatible with the Extended Blast Shield (Coming Soon!)
17-4ph Stainless
Black Nitride

JMAC CUSTOMS 360 MUZZLE BRAKE 26-1.5 FACEMOUNT, KEYMOUNT, X37, $157.46
https://www.robertrtg.com/stor...OUNT-X37-4p10351.htm


JMAC CUSTOMS X37 BRAVO THREAD PROTECTOR, $26.96
https://www.robertrtg.com/stor...ROTECTOR-4p10302.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
JMAC Customs Bravo Extended Blast Shield

(B)last (D)iversion (S)hield - (37) 1.375-24 threads - (EXT)ended

The BDS-37-EXT was co-developed with the RRD-360-24F-KM & RRD-369-26F-KM series of muzzle devices with external threads. This blast shield threads over 1.375-24 threads and diverts the blast forward, reducing side blast/concussion.

In addition to the 24F/26F-KM the BDS is also compatible with our X37 series devices an works with a wide range of suppressor adapters/mounts.

If you plan on using with the following muzzle devices you will need the adapters

DEAD AIR ARMAMENT KEY-MO ADAPTER

Q PLAN-B, OMEGA

Specifications:
Overall Length: 4.0"
Weight: 5.5oz
Thread Pitch: 1.375-24
Material 17-4ph Stainless Steel
Finish: Black Nitride

JMAC CUSTOMS BRAVO EXTENDED BLAST SHIELD, $103.46
https://www.robertrtg.com/stor...T-SHIELD-6p10352.htm


DEAD AIR ARMAMENT KEY-MO ADAPTER, OMEGA TO DEAD AIR MUZZLE DEVICE, $225.00
https://www.robertrtg.com/stor...E-DEVICE-15p8912.htm


Q PLAN-B, OMEGA, $134.99
https://www.robertrtg.com/stor...N-B-OMEGA-6p9947.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Finally, a flat built just for the CETME C with a flat sided mag well.
Made on the same German HK tooling, from steel with the correct spec and thickness, as our new production G3 receiver flats (SKU: HKK-9902), which are the best quality, easiest to fold HK91-G3 receiver flats ever available.

Correct dimensions with flat rails and deep embossing with scope tabs that are more to spec than any other flat.

CETME C RECEIVER FLAT, $79.99
https://www.robertrtg.com/stor...IVER-FLAT-2p3996.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Ruger 57 Threaded Barrel 5.4", 1/2 x 28 RH. This Kit Contains a Factory Manufactured Stainless Steel Barrel For Optimal Fit and Function

Fits Ruger-57
Threaded 1/2"-28
Includes thread protector, adapter, and wrench

Ruger is excited to introduce the Ruger-57(TM) Threaded Barrel Kit. This Genuine Ruger(R) Factory Accessory is compatible with the Ruger-57(TM). The factory-manufactured, threaded stainless steel barrel accepts any 1/2"-28 (Class 2A) muzzle device. This kit contains a factory-manufactured stainless steel barrel for optimal fit and function. Installing the threaded barrel is quick and easy with no gunsmithing required. Thread protector, adapter and wrench included.

RUGER 57 THREADED BARREL KIT 5.4" 1/2X28, $229.95
https://www.robertrtg.com/stor...1-2X28-216p10362.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Surefire 328LMF-B. Compact LED 500 Lumen Forend WeaponLight for H&K MP5, SP5, HK94, HK53

The quintessential battle-ready compact WeaponLight for Heckler & Koch platforms
500 lumens of output from a single 123A battery
Intuitive switching won't compromise grip on the weapon
Virtually indestructible LED and TIR lens produce brilliant beam optimized for close- to medium-range applications
Ergonomic switching provides positive control of illumination with a normal firing grip
Hard-anodized aluminum body, tempered window & O-ring seals make light rugged and durable

Upgrade Your Furniture. The SureFire 328LMF-B dedicated forend WeaponLights replace the original forend of your Heckler & Koch MP5 submachine gun, HK53 rifle, or HK94 carbine, and provide high-intensity illumination required to dominate a low-light tactical situation. Each features a virtually indestructible LED emitter focused by a TIR lens, producing a brilliant beam optimized for close- to medium-range applications. The 328LMF-B generates 500 lumens of output and has a runtime of one hour on a single 123A lithium battery. The 328LMF-B features a single momentary-on pressure-pad switch integrated into the right side of the forend and a rocker-type constant-on switch on the left side, allowing positive control of the light while maintaining your normal firing grip.

KEY ATTRIBUTES
High Output: 500 lumens
High Runtime: 1 hour
Peak Beam Intensity: 7,600 candela
Batteries: One 123A lithium (incl.)
Switching: Pressure pad + constant-on rocker
Length: 8.14 in (20.6 cm)
Output
High Output: 500 lumens
High Runtime: 1 hour
Distance: 175 meters
Body
Construction: Polymer / aluminum
Finish: Mil-Spec hard anodized (bezel only)
Weight W/ Batteries: 9.6 oz (272.2 g)
Bezel Diameter: 1.125 in (2.9 cm)

SUREFIRE 328LMF-B COMPACT LED WEAPONLIGHT FOR HK MP5 SP5 HK53, $584.00
https://www.robertrtg.com/stor...P5-HK53-107p4228.htm


[/QUOTE]


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Ruger 57 Threaded Barrel 5.4", 1/2 x 28 RH. This Kit Contains a Factory Manufactured Stainless Steel Barrel For Optimal Fit and Function

Fits Ruger-57
Threaded 1/2"-28
Includes thread protector, adapter, and wrench

Ruger is excited to introduce the Ruger-57(TM) Threaded Barrel Kit. This Genuine Ruger(R) Factory Accessory is compatible with the Ruger-57(TM). The factory-manufactured, threaded stainless steel barrel accepts any 1/2"-28 (Class 2A) muzzle device. This kit contains a factory-manufactured stainless steel barrel for optimal fit and function. Installing the threaded barrel is quick and easy with no gunsmithing required. Thread protector, adapter and wrench included.

RUGER 57 THREADED BARREL KIT 5.4" 1/2X28, $229.95
https://www.robertrtg.com/stor...1-2X28-216p10362.htm
[/QUOTE]


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
HK, VP9 Optics Rady Slide Kit, Black Color, Fits VP9 or VP9-B, Updated 2022 Version
This VP9 slide quickly and easily converts a standard VP9 or VP9-B to an optics ready platform. Just install your existing barrel and recoil spring.

VP9 Optics Ready Slide Kit Includes:
Cocking supports
Complete firing pin assembly
Cover plate for optics cut
Suppressor height sights. Black serrated rear and high contrast tritium front sight.
The Suppressor Height sights are specific for lower 1/3 co-witness with a mounted RMR. Other sights may vary.

GENUINE HK, MADE IN GERMANY

HK PART NUMBER: 51001080

CONDITION: NEW IN BOX

HK VP9 2022 SLIDE KIT OPTICS READY W/ ELEVATED SIGHTS, $329.99
https://www.robertrtg.com/stor...-SIGHTS-350p8038.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Sig Sauer, TANGO6T, Rifle Scope, 1-6X24MM, 30MM Main Tube, Flat Dark Earth, Dual Windhold Long Range Reticle, Mrad Adjustments, Capped Turrets, FFP

US Military grade Sig Sauer Tango6T Rifle Scope
Dual Windhold Long Range Reticle (DWLR6)

This is my favorite SDMR style optic. I use these on all of our SCAR rifles. This scope is idiot proof and the reticle drop points are super easy to use.

Selected by the U.S. Army for both the Squad Designated Marksman Rifle System and for U.S. Special Forces, the TANGO6T is available in the commercial market. Designed for today's common MSR/AR and bolt action platforms, this scope is the ideal solution for CQB / mid-range tactical engagements, 3 Gun competitions and hunting. The TANGO6T is complete with the HDX optical system for extreme clarity and low-light performance, HellFire fiber optic and glass-etched illuminated reticles, and first or second focal plane designs.

HDX optics extra-low dispersion glass (ED) combined with high transmittance glass (HT) provide industry-leading light transmission and optical clarity for any situation
6x Super-Zoom Advanced Optical System
Fast Focus Eyepiece
Night Vision (NV) Illuminated reticle settings with locking illumination dial
Laser engraved mounting line to align riflescope to scope rings
Dependable waterproof (IPX-8 rated for complete and continuous immersion at 20 meters ) and fog-proof performance
Power selector ring throw lever included with all models
Covered by SIG SAUER's INFINITE Guarantee and Electronics Limited Warranty, see website for full details.
Assembled in SIG SAUER optics factory in Wilsonville, Oregon, USA

Specifications:

Retail Price: $2,199.99
SKU: SOT61239
FOCAL PLANE: First (FFP)
RETICLE: Dual Windhold Long Range Reticle (DWLR6)
ADJUSTMENT INCREMENTS: 0.2 MRAD
WEIGHT: 20.9
MAINTUBE DIAMETER: 30 mm
TRAVEL PER ROTATION: 20 MRAD
PARALLAX SETTING: 150 Meters
FIELD OF VIEW LOW (FT @ 100 YARDS): 105.8
FIELD OF VIEW HIGH (FT @ 100 YARDS): 17.7
EYE RELIEF LOW (IN): 3.9
EYE RELIEF HIGH (IN): 4.1
EXIT PUPIL LOW (MM): 11.4
EXIT PUPIL HIGH (MM): 4
DIOPTER ADJUSTMENT RANGE: +/- 2.5
WATERPROOFING: IPX 8
OCULAR OUTER DIAMETER (IN): 1.81
OBJECTIVE OUTER DIAMETER (IN): 1.18
INTERNAL GAS PURGE: Argon
ILLUMINATION SETTINGS: 9 Daylight / 2 NV
EYE RELIEF LOW (IN): 3.9
TOTAL ELEVATION TRAVEL: 31 MRAD
TOTAL WINDAGE TRAVEL: 31 MRAD
BATTERY: (1) CR2032
OBJECTIVE LENS DIAMETER (MM): 24 mm
COLOR: FDE
MAGNIFICATION: 1-6x
ILLUMINATION: Yes

SIG TANGO6T 1-6x24 RIFLE SCOPE, FFP, DWLR6 RETICLE, $1425.00
https://www.robertrtg.com/stor...-RETICLE-8p10379.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 378 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
  Powered by Social Strata Page 1 ... 15 16 17 18 19  
 

SIGforum.com    Main Page  Hop To Forum Categories  Classifieds Section    WTS: DPMS 16 INCH 5.56 NATO BARREL, 1:9 TWIST, F MARKED A-FRAME FSB AND BARREL NUT, $134.99

© SIGforum 2022