SIGforum.com    Main Page  Hop To Forum Categories  Classifieds Section    WTS: 20-PACK AK/SKS 7.62X39 STRIPPER CLIPS NEW, CHINESE, $8.95
Page 1 ... 12 13 14 15 16 
Go
New
Find
Notify
Tools
Reply
  
WTS: 20-PACK AK/SKS 7.62X39 STRIPPER CLIPS NEW, CHINESE, $8.95 Login/Join 
Member
posted Hide Post
Absolutely the coolest upgrade for your Remington Tac-13 Shotgun Pistol!
A complete kit, ready-to-assemble on your Remington Tac-13, greatly enhancing the usability of the firearm by adding a third point of contact.

Features:
Complete kit, ready-to-assemble

ATF compliant, US veteran designed and proudly made in the USA

Specifications:
Fit: Remington Tac-13 12GA
Length: 10.25 Inch
Width (MAX): 2.1 Inch
Weight: 21 Ounce
Strap Width: 1 Inch
Color: Black

SB TACTICAL REMINGTON TAC13 SBA3 12GA PISTOL BRACE KIT, $215.99
https://www.robertrtg.com/stor...ACTICAL-454p8010.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 316 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
We just received a large order of these and have reason to believe that this will be the last batch at this price. FYI.

German HK MP5, SP5, SP5K 30rd curved magazines. These are current production and brand new in original wrap. Stamped Made in Germany.

This MP5 30rd mag fits all HK MP5/SP5/HK94/SP89/SP5K/MP5K, MKE, BW5, SW5, CA94 and other HK 9mm clones.

ORIGINAL HK, MADE IN GERMANY

CONDITION: NEW

HK PART NUMBER 206349S

GERMAN MP5 SP5 SP5K 30RD CURVED MAG NEW, $78.95
https://www.robertrtg.com/stor...-GERMAN-129p4150.htm



Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 316 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Absolutely the coolest upgrade for your Remington Tac-13 Shotgun Pistol!
A complete kit, ready-to-assemble on your Remington Tac-13, greatly enhancing the usability of the firearm by adding a third point of contact.

Features:
Complete kit, ready-to-assemble

ATF compliant, US veteran designed and proudly made in the USA

Specifications:
Fit: Remington Tac-13 12GA
Length: 10.25 Inch
Width (MAX): 2.1 Inch
Weight: 21 Ounce
Strap Width: 1 Inch
Color: Black

SB TACTICAL REMINGTON TAC13 SBA3 12GA PISTOL BRACE KIT, $215.99
https://www.robertrtg.com/stor...ACTICAL-454p8010.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 316 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
AK Receiver Maintenance Block

Compatible with most AK47 and AK74 variants (minor fitting may be required)
Able to hold complete firearm for maintenance
Allows for disassembly and reassembly of bolt
High strength polymer construction
Mounting holes for attachment to bench or alternative work surface
Multiple points of contact for vice use
Weight: 8.2oz
Height: 5.25”
Length: 5.25”
Width: 1.5”
100% Made in USA

MIDWEST INDUSTRIES AK RECEIVER MAINTENANCE BLOCK, $34.95
https://www.robertrtg.com/stor...NCE-BLOCK-4p9906.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 316 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post



M1 GARAND 2RD CLIP NEW, $3.99
https://www.robertrtg.com/stor...LIP-NEW-196p7463.htm


M1 GARAND 5RD CLIP NEW, $3.99
https://www.robertrtg.com/stor...LIP-NEW-196p7462.htm


M1 GARAND 8RD CLIP NEW, USGI MIL-SPEC, $1.29
https://www.robertrtg.com/stor...IL-SPEC-196p7459.htm


10-PACK M1 GARAND 8RD CLIPS NEW, USGI MIL-SPEC, $10.99
https://www.robertrtg.com/stor...IL-SPEC-196p7460.htm


100-PACK M1 GARAND 8RD CLIPS NEW, USGI MIL-SPEC, $99.99
https://www.robertrtg.com/stor...IL-SPEC-196p7461.htm


M1 GARAND M1923 KHAKI AMMO BELT NEW, $49.95
https://www.robertrtg.com/stor...ELT-NEW-196p7373.htm


M1 GARAND LEATHER SLING, REPRO U.S. WWII, $22.95
https://www.robertrtg.com/stor...-S-WWII-196p7330.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 316 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
Picture of PGT
posted Hide Post
Any ETA on 42rd AUG mags back in stock?
 
Posts: 2682 | Registered: December 21, 2014Reply With QuoteReport This Post
Member
posted Hide Post
I wish I had an ETA. Sorry about that.


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 316 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Just got these in and have very few of them...

Q SHORTY STOCK, BLK, $299.95
https://www.robertrtg.com/stor...OCK-BLACK-6p9951.htm


Q SHORTY STOCK, GRAY, $299.95
https://www.robertrtg.com/stor...TOCK-GRAY-6p9954.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 316 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Lancer Magazine, L5 Advanced Warfighter, 223 Remington/556NATO, Fits AR Rifles, 20 Rounds, Polymer, Black

Lancer set out to engineer a better magazine; one with the reliability of steel, durability of polymer and weight of aluminum - the L5AWM. The magazine design includes a one-piece, wrap-around steel feed lip assembly and an aggressive surface texture to create the ultimate hybrid magazine tough enough for military, LE and commercial use. The internal geometry of the Advanced Warfighter Magazine is a constant curvature utilizing a non-tilting follower for reliable feeding. The body and component materials are corrosion and chemical resistant, passing military chemical testing.

LANCER L5AWM 20RD BLACK MAG, 5.56MM / .223REM, BLK, $15.99
https://www.robertrtg.com/stor...MM-223REM-6p9914.htm


LANCER L5AWM 20RD FDE MAG, 5.56MM / .223REM, FDE, $15.99
https://www.robertrtg.com/stor...MM-223REM-6p9915.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 316 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Brand new Midwest Industries M-LOK handguard for your HK93, HK33, G3K or similar clone. Also correct for PTR rifles using shorter HK93 length handguards

Absolute top quality MI production made right here the USA.

Professional grade one piece design
Simple installation, includes all tools
Mil-spec top rail
Extremely lightweight design, weighs only 7.1 oz with hardware
Slim 1.6 inch diameter for a great feel
Features 30 full and 2 half M-LOK slots
One five slot M-LOK compatible rail included
Constructed of 6061 aluminum, hard coat anodized for a lifetime of service
100% Made in the U.S.A., 922R Compliant
MI Lifetime Warranty
Patent pending
M-LOK is a trademark of Magpul Industries Corp

MI HK93 HK33 G3K HANDGUARD, M-LOK, $174.95
https://www.robertrtg.com/stor...D-M-LOK-119p5996.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 316 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Samson Star MP5 Handguard

Guys, these are impressively well made and ergonomic!

Looking to upgrade your Heckler & Koch MP5 or MP5 variant? This Samson two-piece MP5 handguard design clamps to the barrel trunion area and mounts easily to the front handguard mounting point. No permanent modifications to the weapon are required. Allows clearance for the charging handle as well. Get this high-quality H&K MP5 accessory (or MP5 clone accessory) today!

SAMSON STAR HK MP5 SP5 HANDGUARD, $176.13
https://www.robertrtg.com/stor...NDGUARD-107p9976.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 316 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
The XVL2-IRC Pistol & Carbine Light/Laser Module system is a paradigm shift in light and aiming laser systems. Proven technological advancements in tactical illumination are key design elements in the XVL2-IRC. Custom MaxVision Beam technology shapes the illumination beam into one that provides the optimum mix of projected illumination plus wide-angle illumination for target acquisition and situational awareness. The MaxVision Beam technology keeps the XVL2-IRC profile small and weight to a minimum to maximize the efficiency and efficacy of the warfighter.

Developed at the request of top military and law enforcement professionals
Dual LEDs deliver white light and infrared illumination for extreme versatility
Coaligned dual lasers (green and IR) for quick and easy zeroing
Virtually indestructible white-light and infrared LEDs regulated to maximize output and runtime
Integral ambidextrous momentary- and constant-on switching
Attaches securely to both Universal and Picatinny accessory rails

SPECIFICATIONS

HIGH OUTPUT - 400 lumens
HIGH RUNTIME - 1.5 hours
PEAK BEAM DENSITY - 820 candela
GREEN LASER OUTPUT - <5 millWatts (520 nm)
IR OUTPUT - 300mW / 850 nm
IR LASER OUTPUT - <.7 milliWatts (+/- 10%)
DISTANCE - 54 Meters
LENGTH - 3.0 in (7.62 cm)
SWITCHING - Ambidextrous push / toggle
BATTERIES - One 123A lithium (incl.)
BODY CONSTRUCTION - Aluminum
FINISH - Mil-Spec Hard Anodized
WEIGHT W/ BATTERIES - 5.0 oz (142 g)
BEZEL DIAMETER - 1.06 in (2.7 cm)
LIQUID INGRESS PROTECTION - IPX8 (66 feet, 2 hours)

SUREFIRE XVL2-IRC PISTOL AND CARBINE LASER / LIGHT MODULE, BLK, $1299.00
https://www.robertrtg.com/stor...ODULE-BLK-8p9991.htm



Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 316 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Our new production HK G3 receiver flat.

This is the best quality, easiest to fold HK91-G3 receiver flat ever available. (Works perfect for CETME C builds too. Only difference between a HKG3 and CETME flat is the rib stamped into the magazine well. Functionally they are identical.)

Made on German HK tooling from steel with the correct spec and thickness. Correct dimensions, with flat rails and perfect pin holes. Deep embossing with scope tabs that are more to spec than any other G3 flat..

G3 RECEIVER FLAT, $79.99
https://www.robertrtg.com/stor...IVER-FLAT-2p3995.htm


Finally, a flat built just for the CETME C with a flat sided mag well.
Made on the same German HK tooling, from steel with the correct spec and thickness, as our new production G3 receiver flats (SKU: HKK-9902), which are the best quality, easiest to fold HK91-G3 receiver flats ever available.

Correct dimensions with flat rails and deep embossing with scope tabs that are more to spec than any other flat.

CETME C RECEIVER FLAT, $79.99
https://www.robertrtg.com/stor...IVER-FLAT-2p3996.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 316 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Samson Star HK MP5K SP5K Handguard

Fits HK MP5K. Two-piece design clamps to barrel trunion area and mounts to the front handguard mounting point. No permanent modifications to the weapon are required. Clearance for charging handle.

SAMSON STAR HK MP5K SP5K HANDGUARD, $168.34
https://www.robertrtg.com/stor...NDGUARD-107p9977.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 316 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Samson Sig MPX 8 Inch M-LOK Handguard

The Samson narrow profile, M-LOK handguard for SIG SAUER MPX pistols and carbines is the answer for those wishing to replace their large factory Keymod handguard.

Features:
Weight: 6.35 oz
ID: 1.3"
6061 aluminum with MIL-STD Black anodizing, FDE Cerakote, or Titanium Cerakote finishes
Continuous top rail and ample M-LOK slots to put your accessories where you need them
Mounts securely to the receiver using the included mounting hardware
Made in New Hampshire USA

SAMSON SIG MPX 8 INCH M-LOK HANDGUARD, BLK, $109.39
https://www.robertrtg.com/stor...ARD-BLK-351p9973.htm


SAMSON SIG MPX 8 INCH M-LOK HANDGUARD, FDE, $109.39
https://www.robertrtg.com/stor...ARD-FDE-351p9974.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 316 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Samson Sig MPX 4.5 Inch M-LOK Handguard, Black

The Samson narrow profile, M-LOK handguard for SIG SAUER MPX pistols and carbines is the answer for those wishing to replace their large factory Keymod handguard.

Features:
Weight: 3.4 oz
ID: 1.3"
6061 aluminum with MIL-STD Black anodizing, FDE Cerakote, or Titanium Cerakote finishes
Continuous top rail and ample M-LOK slots to put your accessories where you need them
Mounts securely to the receiver using the included mounting hardware
Made in New Hampshire USA

SAMSON SIG MPX 4.5 INCH M-LOK HANDGUARD, BLK, $109.39
https://www.robertrtg.com/stor...ARD-BLK-351p9975.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 316 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
The Accu-Tac SR-5 Quick Detach Bipod was designed, engineered, and manufactured in the USA. The SR-5 is 100% billet, made from the highest quality aircraft aluminum available. Its wide stance and ratcheted leg extension gives you the adjustability needed for precision aim and repeatability. You will feel the stability and security of your rifle as never felt before. The SR-5 G2 has the ability to cant which can be locked with its new throw lever. Their quick detach rail mount is simple, quick, and very secure; it attaches to a 1913 Picatinny rail and mounts in seconds without the need to use extra tools for tightening. Their ratcheted leg extension design allows the shooter to quickly adjust to 5 different heights without having to align each leg equally. The spring loaded leg extension retracts quickly with a one-button retraction lever. The retracted leg height of 6 inches extends to a full open position of 10 inches with 3 other positions in-between. To engage or adjust leg position, simply pull the spring loaded leg downward to move each leg independently. Leg position can be deployed in a 90 degree, 45 degree position either forwards or backwards, locking securely into 5 positions through a 180 degree arc.

ACCU-TAC SR-5 G2 BIPOD, $342.00
https://www.robertrtg.com/stor...G2-BIPOD-8p10004.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 316 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
This new German navy SEF plastic lower has been clipped and pinned to fit semi-auto MP5 .40, 10mm and .357 SIG weapons. This is the finest clip and pin you can find, using CNC equipment to make the perfect cut ever time. Also the bolt hold open cut has been done by CNC to provide that authentic look every MP5 40 shooter deserves.

Use your existing semi-auto trigger pack in this lower and you will have the look of a real full auto while maintaining legal semi auto status. This will also work with registered sear packs.

Each lower is new. Selector not included.

MP5 40 10MM NAVY LOWER CLIPPED AND PINNED, $116.95
https://www.robertrtg.com/stor...-PINNED-107p3214.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 316 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
SIG MPX GEN 2 20RD MAGAZINES, NEW, $59.95
https://www.robertrtg.com/stor...20RD-NEW-14p4594.htm


SIG MPX GEN 2 30RD MAGAZINES, NEW, $59.95
https://www.robertrtg.com/stor...30RD-NEW-14p4595.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 316 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
You guys, these are my absolute favorite vertical grips, hands down. All metal construction, great texture, and the way they can be quickly attached and detached is really slick and unique to this Samson design. You wouldn't think the vertical grip could be done much better as it is a simple product, but these guys have really done it.  

SAMSON M-LOK VERTICAL GRIP, SHORT, $54.82
https://www.robertrtg.com/stor...RIP-SHORT-8p9984.htm


SAMSON M-LOK VERTICAL GRIP, MEDIUM, $56.76
https://www.robertrtg.com/stor...IP-MEDIUM-8p9983.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 316 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
  Powered by Social Strata Page 1 ... 12 13 14 15 16  
 

SIGforum.com    Main Page  Hop To Forum Categories  Classifieds Section    WTS: 20-PACK AK/SKS 7.62X39 STRIPPER CLIPS NEW, CHINESE, $8.95

© SIGforum 2022