SIGforum.com    Main Page  Hop To Forum Categories  Classifieds Section    WTS: HK MR762 20RD 7.62X51MM .308 MAGAZINE NEW, $59.95
Page 1 ... 10 11 12 13 14 
Go
New
Find
Notify
Tools
Reply
  
WTS: HK MR762 20RD 7.62X51MM .308 MAGAZINE NEW, $59.95 Login/Join 
Member
posted Hide Post
Bravo Company, Quad Rail, Picatinny Rail, Fits AR Rifles, 8", Black

Steel Barrel Nut to resist movement under heat
1.3" inside diameter
2.12" wide
Actual length is 8.0"

Bravo Company's BCM QRF-8 (Quad Rail Free Float Handguard) features the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard. The QRF Series of handguards gives the shooter modularity in the picatinny (MIL-STD-1913) platform. Includes T, L, R, and B recoil slot markings on all four rails to aid in repeatable set up for the end user. This proprietary patented mounting system (US Patent 8904691), includes a mechanical index to the 12:00 rail and positions mounting hardware to mitigate the movement caused by heat generated by the weapon system. The free float quad rail eliminates loads from barrel, reducing the deflection for more accurate shooting. Its proprietary engineered profile offers additional cross sectional strength. Includes 4 QD Sing Swivel Sockets, (limited rotation).

BRAVO COMPANY BCM QRF-8 PICATINNY QUAD RAIL 8", $171.95
https://www.robertrtg.com/stor...IL-8-quot-6p9605.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 281 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
SIG CLUTCH-LOK FLASH HIDER 5.56 1/2X28 25 DEGREE TAPER, $149.99
https://www.robertrtg.com/stor...EE-TAPER-15p9662.htm


SIG CLUTCH-LOK FLASH HIDER 5.56 1/2X28 90 DEGREE SHOULDER, $149.99
https://www.robertrtg.com/stor...SHOULDER-15p9663.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 281 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
SIG CLUTCH-LOK FLASH HIDER 7.62 58X24 25 DEGREE TAPER, $149.99
https://www.robertrtg.com/stor...EE-TAPER-15p9665.htm


SIG CLUTCH-LOK FLASH HIDER 7.62 58X24 90 DEGREE SHOULDER, $149.99
https://www.robertrtg.com/stor...SHOULDER-15p9664.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 281 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
JMAC CUSTOMS AB-8 STOCK FOR 4.5MM FOLDING AK, $223.07
https://www.robertrtg.com/stor...OLDING-AK-4p9643.htm


JMAC CUSTOMS AB-8R STOCK FOR 4.5MM FOLDING AK, $227.57
https://www.robertrtg.com/stor...OLDING-AK-4p9641.htm


JMAC CUSTOMS AB-9 STOCK FOR 4.5MM FOLDING AK, $230.27
https://www.robertrtg.com/stor...OLDING-AK-4p9646.htm


JMAC CUSTOMS AB-9R STOCK FOR 4.5MM FOLDING AK, $234.77
https://www.robertrtg.com/stor...OLDING-AK-4p9645.htm


JMAC CUSTOMS SS-8 FOR 4.5MM FOLDING AK, $193.41
https://www.robertrtg.com/stor...OLDING-AK-4p9650.htm


JMAC CUSTOMS SS-8R FOR 4.5MM FOLDING AK, $197.91
https://www.robertrtg.com/stor...OLDING-AK-4p9649.htm


JMAC CUSTOMS TS-8 FOR 4.5MM FOLDING AK, $193.41
https://www.robertrtg.com/stor...OLDING-AK-4p9652.htm


JMAC CUSTOMS TS-8R FOR 4.5MM FOLDING AK, $197.91
https://www.robertrtg.com/stor...OLDING-AK-4p9651.htm


JMAC CUSTOMS ST-6 FOR 4.5MM FOLDING AK, $157.41
https://www.robertrtg.com/stor...OLDING-AK-4p9653.htm


JMAC CUSTOMS AB-8 BRACE ADAPTER FOR 4.5MM FOLDING AK, $179.87
https://www.robertrtg.com/stor...OLDING-AK-4p9644.htm


JMAC CUSTOMS AB-8R BRACE ADAPTER FOR 4.5MM FOLDING AK, $184.37
https://www.robertrtg.com/stor...OLDING-AK-4p9642.htm


JMAC CUSTOMS AB-9 BRACE ADAPTER FOR 4.5MM FOLDING AK, $187.07
https://www.robertrtg.com/stor...OLDING-AK-4p9647.htm


JMAC CUSTOMS AB-9R BRACE ADAPTER FOR 4.5MM FOLDING AK, $191.57
https://www.robertrtg.com/stor...OLDING-AK-4p9648.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 281 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
The Binary Firing System GEN 3 (BFSIII) is a 3-position trigger. In position 3, it fires one round on pull and one round on release. This trigger is ideal for having more fun than you thought was possible with your Ruger PC Charger and Ruger PC Carbine.

TRIGGER OPERATION:
Position 1 Safe -Will not fire
Position 2 Semi -Fires 1 round per pull
Position 3 Binary -Fires 1 round on pull and 1 round on release

FEATURES:
Release round can be canceled by simply moving our Patent Pending selector out of Binary mode while holding the trigger back
Works in most 9mm and .40 Cal Ruger PC Carbine trigger housings
Great for competition shooters, tactical shooters, and recreational enthusiasts
Gunsmith Installation Recommended

FRANKLIN ARMORY BFSIII BINARY TRIGGER KIT FOR RUGER PCC, $269.99
https://www.robertrtg.com/stor...UGER-PCC-15p9673.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 281 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
HK45C and USPC .45ACP 8rd magazine with finger-groove extended baseplate.

Brand new, genuine HK production and new in wrap!

Made in Germany by HK

HK PART NUMBER: 234269 or 236269s

HK45C USPC .45ACP 8RD MAGAZINE NEW, GERMAN, $38.95
https://www.robertrtg.com/stor...-GERMAN-228p6813.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 281 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
HK MARK 23 SOCOM 12RD .45ACP MAGAZINE NEW, $58.95
https://www.robertrtg.com/stor...INE-NEW-234p4588.htm


GG&G HK MK 23 FLASHLIGHT AND LASER MOUNT, $94.99
https://www.robertrtg.com/stor...R-MOUNT-234p9083.htm





Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 281 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
The X Series muzzle brake and suppressor adapter remains installed on your firearm and allows direct threading of several suppressors! Its lighter, Shorter, Simpler and Less expensive than most QD systems on the market while maintaining all the positive attributes of a direct thread mount! There are no adapters involved the suppressor threads DIRECTLY onto the mount!

What makes the 360 unique?

3 baffles to protect your suppressor
No timing required
Simple, no adapters
Remains installed on your firearm
Lightweight
Minimal added length
Compatible with dozens of suppressors
Reduced Recoil
Reduced Flash
Blast Shield Available

JMAC CUSTOMS 360 MUZZLE BRAKE 14-1LH FACEMOUNT, X20, $116.96
https://www.robertrtg.com/stor...MOUNT-X20-4p9692.htm


JMAC CUSTOMS 360 MUZZLE BRAKE 14-1LH FACEMOUNT, X37, $116.96
https://www.robertrtg.com/stor...MOUNT-X37-4p9698.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 281 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
ZEV Technologies, Polymer Base Pad +5, Black & Red, For Glock 17

ZEV GLOCK 17 9MM POLYMER BASE PAD +5, BLACK, $29.95
https://www.robertrtg.com/stor...D-5-FDE-171p9701.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 281 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
2-Pack, Ruger, Magazine, 9MM, 10 Rounds, Fits Ruger Security-9, Steel, Black

Ruger factory magazines features high quality components and precise manufacturing that will ensure long-lasting performance and reliability.

2-PACK OF RUGER SECURITY-9 9MM 10RD MAGAZINE NEW, $46.95
https://www.robertrtg.com/stor...ZINE-NEW-14p9680.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 281 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
New PSG1 style black grip with palm shelf for your HK style steel grip frame. Will fit all HK steel grip frames and Cetme steel grip frames.

Like the original HK PSG1 target grip these are larger than standard G3 grips. We used the same awesome texturing as found on our standard HK style grip ACU-43

Fully ambidextrous design.

Specifications:
Color: Black
Weight: 7.9 ounces.
Condition: New
Production: Made in Bosnia and Herzegovina
Fits: HK Style Steel Grip frames for G3/91, 33/53/93, MP5/94/34, Cetme Steel Grip Frames

PSG1 STYLE BLACK GRIP WITH PALM SHELF, $39.95
https://www.robertrtg.com/stor...-AC-UNITY-2p9724.htm



Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 281 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
It has arrived! This is not a “Coming Soon” post. AC-Unity G3/HK91 Wide Handguards are on the shelf now and available for purchase. If you want in on the first batch, get at them now!

New G3 length black wide handguard with bipod groove! Perfect fit for your HKG3, HK91 or PTR91 that takes standard G3 length handguards.

Includes a proper heat shield on the inside to protect your hand. The outer design/texture provides a comfortable and confident grip, with four quick disconnect sling sockets, two on the left and two on the right, for use with modern sling options.

Bipod groove for attaching standard HK G3 style steel bipods

Both the metal and polymer these handguards are manufactured from have been in incredibly short supply since the COVID European shut down began in 2020. These will be difficult for us to keep in stock!

AC-UNITY G3 HK91 BLACK WIDE HANDGUARD NEW, $79.95
https://www.robertrtg.com/stor...-AC-UNITY-2p7937.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 281 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
My friends, the politicians are at it again using the violent and cowardice acts of a few sick individuals to justify the removal of your inalienable rights. This weekend a lot of concerned individuals took the "play it safe" route and slammed us with magazine orders. We stock a huge number of magazines for all manner of firearms, so make sure you are stocked up with what you need and then some!

While supplies last we are going to sell these 30RD and the 40rd versions in 20-Packs for only $99! That’s less than $5 per mag! Load up on mags or start your own group buy, because when they're gone, they're gone!

20-PACK GERMAN MARKET AC-UNITY AK47 30RD MAGS, UNDER $5 EACH, $99.00
https://www.robertrtg.com/stor...ER-5-EACH-4p8950.htm


20-PACK GERMAN MARKET AC-UNITY AK47 40RD MAGS, UNDER $5 EACH, $99.00
https://www.robertrtg.com/stor...ER-5-EACH-4p9054.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 281 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Everything you need, ready to pin onto your MP5 or SP5K.

Gear Head Works MP5-SP5 folding arm bar with Tailhook Mod1 brace installed.

Made in the USA and includes the buffer already installed. It is ready to pin onto the back of your gun.

Note: This is only for the full size & reverse stretch MP5 receivers with the single pin in back. Will not fit the K receiver guns.

MP5 SP5 FOLDING ARM BAR AND TAILHOOK MOD1 COMBO, $239.95
https://www.robertrtg.com/stor...1-COMBO-107p9748.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 281 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
****BARREL MUST EXTEND 1" BEYOND HANDGUARD/GAS BLOCK/FRONT SIGHT WITH A DIAMETER LESS-THAN 0.7"!***

With the advancement of suppressor technology and the popularity of the KeyMount mounting system, the 360-28F was designed to allow users to install a KeyMount compatible muzzle device on their firearm that not only worked well, but also complemented the look of the firearm. The 360-28F is designed to sleeve over the factory barrel approximately .98" and partially cover the tri-lugs (if equipped). This allows the user to install their suppressor closer to the receiver for a shorter overall length and a better balanced firearm. In addition to a KeyMount compatible suppressor, the 360-28F is also compatible with any of our Blast Diversion Shields (BDS) in combination with the proper KeyMount adapter.

The 360-28F will work on any barrel with 1/2-28 threads that extends a minimum of 1" beyond the handguard/gas block/front sight with a diameter less-than 0.7". Below is a list of firearms we have found to be compatible with the 360-28F. Regardless of your firearm, always measure your barrel to ensure your firearm is compatible with the 360-28F before purchase.

HK MP5 and variants with 1/2-28 threads.
AR-15 - Must have "government profile barrel" or barrel with diameter behind the threads of <0.7".
SCAR-16 - Must have 1"+ from has adjustment to end of barrel.
ACR - Must have 1"+ from gas adjustment to end of barrel.
FS2000 - Must be threaded 1/2-28 and must have 1"+ from has adjustment to end of barrel.
AUG - Must be threaded 1/2-28.
Scorpion EVO3 - Must not have 18mm threads behind 1/2-28. Compatible with Micro EVO3 S2 "Micro".
Galil ACE - Pistol/rifle compatible. Measure to ensure fitment.
IWI Tavor

What makes the 360 unique?

3 baffles to protect your suppressor
No timing / shims not required
Lightweight
Minimal added length
Compatible with dozens of suppressors
Reduced Recoil

Specifications:
1/2-28 Barrel Threads
2.050" long (adds approx .85")
Sleeves barrel .98"
No rear wrench flats -- allows for installation on MP5/MP5K/ 3lug with 1/2x28 barrels
Can be installed with a 3/4" socket
10mm Bore
KeyMount and KeyMicro Compatible
17-4ph Stainless
Black Nitride

JMAC CUSTOMS 360 MUZZLE BRAKE 1/2-28 FACEMOUNT, KEYMOUNT, $103.46
https://www.robertrtg.com/stor...-KEYMOUNT-6p9729.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 281 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
New Yugo fixed to folding adapter allows you to use an existing fixed Yugo pattern stock and convert it to folding for use in a rifle only. Fits Yugo pattern stocks such as M70, M72, OPAP, NPAP and ZPAP. Will not work with any AK unless it has an existing Yugo style stock trunnion. Consists of the patent pending adapter, our Galil style spring hinge and an existing Yugo stock trunnion adapter.

Instructions for Serbian/Yugo Fixed to Folding Stock Hinge and Adapters (For existing customer owned Fixed Serbian/Yugo Stocks)

This adapter must be mounted to both an existing rifle and existing fixed stock to open and close. It is very difficult to function as you received it.

To install:

Using the longer screw thread it through your existing stock into the female adapter that looks like a Yugo trunnion. This hardware is 5/16-24x2 Socket Head Cap Screw. If the hardware is too short or too long we recommend sourcing the correct size as long as the threading is the same. Then thread the shorter screw from the inside your rifle into the male stock adapter. This hardware is 1/4-28x7/8 Socket Head Cap Screw.

The spring is super stiff for a reason. The stiffer the spring the less play you will get but it is not easy to open and close. We recommend putting one drop of oil on the spring and working the action several times. The more use the easier it will get. Please note that with this hinge you must push/pull to both fold the stock and unfold the stock. This is mandatory for proper function of the hinge. Please do not force the stock and hinge to close into the fixed position. Doing so will void the warranty. If you close the stock without doing the push/pull you will stress the wings on the hinge to eventually chip of even break. Unfortunately, this is common with the Galil style hinges.

The factory hardware was assembled without a threadlocker. Eventually the vibration will cause the hardware to loosen. We recommend starting with a blue threadlocker first and if that doesn't hold go with a red permanent threadlocker.

SIDE FOLDING ADAPTER FOR M70 FIXED STOCKS, CRH CUSTOMS / CIRCLE 10 AK, $129.95
https://www.robertrtg.com/stor...CLE-10-AK-4p9750.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 281 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Sig Sauer, Magazine, 9MM, 17 Rounds, with Henning Group Aluminum Basepad, Fits Sig P320 X-Five Legion, Steel, Black

SIG part number: 8900060
Condition: New in box

SIG P320 X-FIVE LEGION 9MM 17RD MAG NEW, $49.99
https://www.robertrtg.com/stor...-MAG-NEW-14p9759.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 281 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
This tube was made specifically to match up to the Tailhook Mod 1 pistol brace ideal diameter. The Tailhook brace installs anywhere along the tube as desired. Overall length is 9 inches. This kit includes the buffer tube, buffer, spring, castle nut, end plate, and Tailhook Mod 1. Features anti rotation slot for standard end plates as well. Anodized finish. Made in the USA.

GEAR HEAD WORKS AR PISTOL BUFFER TUBE ASSEMBLY W/ TAILHOOK MOD 1, COMPLETE, $149.95
https://www.robertrtg.com/stor...-COMPLETE-6p9751.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 281 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Magpul Industries, PMAG, D-50, 50Rd Drum, Black, Fits HK94/MP5 Pattern Firearms

Next-generation impact, crush resistant polymer construction and corrosion resistant
Bolt hold open feature to lock the bolt back on the last round
Will seat fully loaded on a closed bolt
Ratcheting Loading Lever takes tension off the spring for easy loading by hand
Easy to disassemble for cleaning with only a flat-bladed screwdriver or similar flat-bladed tool
Anti-glare translucent window on rear of drum allows for easy determination of rounds remaining
Fits HK94, MP5, MP5SD, MP5K, SP5, SP5K, SP89 and similar HK 9mm clones
Counts as three US 922r compliance parts

Lightweight but incredibly strong, Magpul's PMAG D-50 MP is a highly reliable, 9x19mm Parabellum, 50-round drum magazine for HK94/MP5 large-format pistols and pistol caliber carbines.It's unique drum configuration keeps the height of the magazine manageable, allowing for prone firing and easier storage. For easy loading, it includes a ratcheting loading lever that removes tension from the internal spring. They've also included a rounds-remaining rear window, a high-visibility follower and a capacity indication roller.

PMAG D-50 MP5 9MM 50RD DRUM NEW, $118.70
https://www.robertrtg.com/stor...DRUM-NEW-14p9797.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 281 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
Member
posted Hide Post
JMAC CUSTOMS AB-8 BRACE ADAPTER FOR 5.5MM FOLDING AK, TAN, $179.87
https://www.robertrtg.com/stor...NG-AK-TAN-4p9792.htm


JMAC CUSTOMS AB-8 STOCK FOR 5.5MM FOLDING AK, TAN, $223.07
https://www.robertrtg.com/stor...NG-AK-TAN-4p9774.htm


JMAC CUSTOMS AB-8R BRACE ADAPTER FOR 5.5MM FOLDING AK, TAN, $184.37
https://www.robertrtg.com/stor...NG-AK-TAN-4p9781.htm


JMAC CUSTOMS AB-8R STOCK FOR 5.5MM FOLDING AK, TAN, $227.57
https://www.robertrtg.com/stor...NG-AK-TAN-4p9772.htm


JMAC CUSTOMS AB-9 BRACE ADAPTER FOR 5.5MM FOLDING AK, TAN, $187.07
https://www.robertrtg.com/stor...NG-AK-TAN-4p9778.htm


JMAC CUSTOMS AB-9 STOCK FOR 5.5MM FOLDING AK, TAN, $230.27
https://www.robertrtg.com/stor...NG-AK-TAN-4p9769.htm


JMAC CUSTOMS AB-9R BRACE ADAPTER FOR 5.5MM FOLDING AK, TAN$191.57
https://www.robertrtg.com/stor...NG-AK-TAN-4p9789.htm


JMAC CUSTOMS AB-9R STOCK FOR 5.5MM FOLDING AK, TAN, $234.77
https://www.robertrtg.com/stor...NG-AK-TAN-4p9804.htm


JMAC CUSTOMS SS-8 FOR 5.5MM FOLDING AK, TAN, $193.41
https://www.robertrtg.com/stor...NG-AK-TAN-4p9790.htm


JMAC CUSTOMS SS-8R FOR 5.5MM FOLDING AK, TAN, $197.91
https://www.robertrtg.com/stor...NG-AK-TAN-4p9791.htm


JMAC CUSTOMS ST-6 FOR 5.5MM FOLDING AK, TAN, $157.41
https://www.robertrtg.com/stor...NG-AK-TAN-4p9793.htm


Best Regards,
Darwin
RTG Parts
931 Frank Street
Sheridan, WY 82801
Office: 307-675-1191
Fax: 307-675-1192
www.rtgparts.com
Darwin@rtgparts.com
 
Posts: 281 | Location: Sheridan, WY | Registered: April 06, 2021Reply With QuoteReport This Post
  Powered by Social Strata Page 1 ... 10 11 12 13 14  
 

SIGforum.com    Main Page  Hop To Forum Categories  Classifieds Section    WTS: HK MR762 20RD 7.62X51MM .308 MAGAZINE NEW, $59.95

© SIGforum 2022