SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Getting there with the new truck
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
Getting there with the new truck Login/Join 
Green grass and
high tides
Picture of old rugged cross
posted Hide Post
J, who did your undercoating?
Yes the upfitter switches, there is also a fuse block under the hood for accessory wiring that connects to the switches. Makes adding items easier.
I may add add air bags also. My Tundra had them and are nice to have.



"Practice like you want to play in the game"
 
Posts: 20496 | Registered: September 21, 2005Reply With QuoteReport This Post
Prepared for the Worst, Providing the Best
Picture of 92fstech
posted Hide Post
That's a nice looking truck. And I agree, no point in going with anything shorter than an 8' bed. Especially with a Super Duty.
 
Posts: 10465 | Location: In the Cornfields | Registered: May 25, 2006Reply With QuoteReport This Post
If you see me running
try to keep up
Picture of mrvmax
posted Hide Post
Nice truck and setup, I would have liked to have your old truck.
 
Posts: 4519 | Location: Friendswood Texas | Registered: August 24, 2007Reply With QuoteReport This Post
Three Generations
of Service
Picture of PHPaul
posted Hide Post
quote:
Originally posted by mrvmax:
Nice truck and setup, I would have liked to have your old truck.


We'd probably both been happier. I got hosed pretty hard on the trade-in, but I didn't want to deal with the hassle/delay of a private sale.

Lack of patience can be expensive...




Be careful when following the masses. Sometimes the M is silent.
 
Posts: 15963 | Location: Downeast Maine | Registered: March 10, 2010Reply With QuoteReport This Post
Three Generations
of Service
Picture of PHPaul
posted Hide Post




Daughter touched up The Abdominal Snowman for my traditional dash toy.




Be careful when following the masses. Sometimes the M is silent.
 
Posts: 15963 | Location: Downeast Maine | Registered: March 10, 2010Reply With QuoteReport This Post
Green grass and
high tides
Picture of old rugged cross
posted Hide Post
PHPaul, How is it going with your new truck. Any issues that the dealer has had to handle or just a happy camper so far.

Mine has been at the dealer for two going on two weeks and that is after one visit by the service manager and a couple of trips by me. Hopefully by this week a resolution is going to be reached.

Hope your situation is good and you are happy.



"Practice like you want to play in the game"
 
Posts: 20496 | Registered: September 21, 2005Reply With QuoteReport This Post
Member
Picture of vthoky
posted Hide Post
quote:
Originally posted by PHPaul:
(dash toy pic)


Love the Bumble! Cool




God bless America.
 
Posts: 14630 | Location: Virginia | Registered: July 15, 2007Reply With QuoteReport This Post
Res ipsa loquitur
Picture of BB61
posted Hide Post
Nice truck. Mrs BB61 and I just got back from the Grand Canyon putting nearly 1k miles on our new truck. We still are debating shell vs cover.





__________________________

 
Posts: 12774 | Registered: October 13, 2002Reply With QuoteReport This Post
Three Generations
of Service
Picture of PHPaul
posted Hide Post
quote:
Originally posted by old rugged cross:
PHPaul, How is it going with your new truck. Any issues that the dealer has had to handle or just a happy camper so far.

Mine has been at the dealer for two going on two weeks and that is after one visit by the service manager and a couple of trips by me. Hopefully by this week a resolution is going to be reached.

Hope your situation is good and you are happy.



Happy so far, no issues that can be blamed on the truck. Trailer problem was that the hot and ground for the brakes were reversed. Real head-scratcher as they worked fine with the Tundra. It had a separate Tekonsha controller so that may have been the issue.

In mixed driving (some towing, some running empty) it's averaging a shade over 14mpg which is satisfactory. The Tundra got 15-17 and didn't have near the balls the F250 does.

Only driveability issue is that it waits FAR too long in my opinion to downshift on hills when towing. If I don't really put my foot in it it just keeps pulling the RPMs down. I've taken to using the manual shift buttons and forcing it to drop to 6th or 7th. Left to it's own devices it'll stay in 8th and lug.




Be careful when following the masses. Sometimes the M is silent.
 
Posts: 15963 | Location: Downeast Maine | Registered: March 10, 2010Reply With QuoteReport This Post
Green grass and
high tides
Picture of old rugged cross
posted Hide Post
Well that is good to hear PHPaul. Did your truck come with an actual owners manual or did the dealer say you need to use the truck software system as the manual Roll Eyes

As I said I am currently without the truck but was roughly 13mph-ish mpg with the 7.3L when I did have. Tons of power for sure.



"Practice like you want to play in the game"
 
Posts: 20496 | Registered: September 21, 2005Reply With QuoteReport This Post
Three Generations
of Service
Picture of PHPaul
posted Hide Post
Nope, no owner's manual. I need to see if there's a PDF on line somewhere.




Be careful when following the masses. Sometimes the M is silent.
 
Posts: 15963 | Location: Downeast Maine | Registered: March 10, 2010Reply With QuoteReport This Post
Altitude Minimum
Picture of BOATTRASH1
posted Hide Post
I just got a truck almost exactly like BB61, 2025 GMC 2500 HD SLT.
It has a minimal owner's manual in the truck along with a Duramax Diesel supplement manual. I had to go to GMC.com and find the manual and have been printing out sections I need to reference.
 
Posts: 1354 | Location: Shalimar, FL | Registered: January 24, 2007Reply With QuoteReport This Post
Altitude Minimum
Picture of BOATTRASH1
posted Hide Post
PHPaul I just searched for Ford Owners manuals. Clicked on the Ford Owners manuals that came up and put in your truck info. Popped right up. 700+ pages I believe. Of course, a lot of it won't apply to your truck. VIN # search might narrow it down.
 
Posts: 1354 | Location: Shalimar, FL | Registered: January 24, 2007Reply With QuoteReport This Post
אַרְיֵה
Picture of V-Tail
posted Hide Post
quote:
Originally posted by PHPaul:

Nope, no owner's manual.
Remember when cars (and motorcycles) came with an owners' manual that had a section with instructions for do-it-yourself maintenance?



הרחפת שלי מלאה בצלופחים
 
Posts: 32359 | Location: Central Florida, Orlando area | Registered: January 03, 2010Reply With QuoteReport This Post
Technically Adaptive
posted Hide Post
quote:
Originally posted by V-Tail:
quote:
Originally posted by PHPaul:

Nope, no owner's manual.
Remember when cars (and motorcycles) came with an owners' manual that had a section with instructions for do-it-yourself maintenance?


For sure! Especially in the '70s, that was when if you wanted a car you got a job after school.
Old rusted out thing that you fixed yourself, put used tires on it when needed.
Now there is no need for owners manuals, except online.
 
Posts: 1609 | Location: Willcox, AZ | Registered: September 24, 2006Reply With QuoteReport This Post
Three Generations
of Service
Picture of PHPaul
posted Hide Post
quote:
Originally posted by BOATTRASH1:
PHPaul I just searched for Ford Owners manuals. Clicked on the Ford Owners manuals that came up and put in your truck info. Popped right up. 700+ pages I believe. Of course, a lot of it won't apply to your truck. VIN # search might narrow it down.


Yeah, I found it too. Downloaded it just in case. Nice thing about a PDF file is it's searchable. No trying to find stuff from the index.




Be careful when following the masses. Sometimes the M is silent.
 
Posts: 15963 | Location: Downeast Maine | Registered: March 10, 2010Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Getting there with the new truck

© SIGforum 2025