SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Question About Sheds
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
Question About Sheds Login/Join 
Get my pies
outta the oven!

Picture of PASig
posted
I have a small shed out in my backyard I’d estimate is about 25-30 years old, it’s 6‘ x 8‘. What I don’t get is they appeared to set the thing directly on the ground, so it is literally rotting from the ground up.

That is not normal, right? I always thought you had to put a shed on some sort of concrete pad or at least a base of crushed stone?

I am in the process of shopping around for a new shed, I’m going to go with a 8’ x 10‘ or 10’ x 10‘ model, fortunately around here we have a lot of Amish shed builders so there is a good variety of them to be had and they are built like tanks.

With that being said, is crushed stone base going to be OK for this new one? Or should I look into getting a concrete pad poured?


 
Posts: 34875 | Location: Pennsylvania | Registered: November 12, 2007Reply With QuoteReport This Post
Member
posted Hide Post
Concrete pad.
 
Posts: 17599 | Location: Stuck at home | Registered: January 02, 2015Reply With QuoteReport This Post
Raised Hands Surround Us
Three Nails To Protect Us
Picture of Black92LX
posted Hide Post
All of our sheds are raised and leveled on cinder blocks.
Like this and skirted to cover the gap between the ground and shed. Never bothered with gravel underneath.


————————————————
The world's not perfect, but it's not that bad.
If we got each other, and that's all we have.
I will be your brother, and I'll hold your hand.
You should know I'll be there for you!
 
Posts: 25745 | Registered: September 06, 2003Reply With QuoteReport This Post
Ammoholic
Picture of Skins2881
posted Hide Post
I poured concrete for mine (Rubbermaid plastic one) with the expectations that it would quickly be replaced with a "real" shed. 15 years later my $150 shed (last one they had before switching brands) has surprised me, it will likely outlive my time in my house.

All that aside, it's preferred to be on concrete. Cinder blocks are a good cheaper option. These are a reasonable middle ground between poured pad and cinder blocks.



Jesse

Sic Semper Tyrannis
 
Posts: 21227 | Location: Loudoun County, Virginia | Registered: December 27, 2014Reply With QuoteReport This Post
McNoob
Picture of xantom
posted Hide Post
I wouldn't set it on bare ground but that's me. I put up a Suncast 8 x 10 shed a few summers ago. I put crushed rock down in the 4 corners then leveled it up with cement blocks. I made the base with 2 x 6 treated lumber and covered it in 3/4" treated sheeting.








"We've done four already, but now we're steady..."
 
Posts: 1836 | Location: MN | Registered: November 20, 2013Reply With QuoteReport This Post
blame canada
Picture of AKSuperDually
posted Hide Post
A lot of sheds get built on skids which will rot over time. A shed is typically a short-life building. If a building is set on skids, then it isn't permanent, and thus untaxable in some jurisdictions. It becomes a temporary building. That can cause equal problems in other localities.

Typically real estate is improvements built on permanent foundations or otherwise affixed to the ground.

If you want a shed to last, a pad is a great way to do it. Constructing some other sort of foundation, like pilings or blocks can be another way. The soil type, size, and anticipated weight should factor into your site work. Don't forget drainage.


~~~~~~~~~~~~~~~~~~~~~~~~~
"The trouble with our Liberal friends...is not that they're ignorant, it's just that they know so much that isn't so." Ronald Reagan, 1964
~~~~~~~~~~~~~~~~~~~~~~~~~~
"Arguing with some people is like playing chess with a pigeon. It doesn't matter how good I am at chess, the pigeon will just take a shit on the board, strut around knocking over all the pieces and act like it won.. and in some cases it will insult you at the same time." DevlDogs55, 2014 Big Grin
~~~~~~~~~~~~~~~~~~~~~~~~~~

www.rikrlandvs.com
 
Posts: 13991 | Location: On the mouth of the great Kenai River | Registered: June 24, 2007Reply With QuoteReport This Post
Man of few words

Picture of remsig
posted Hide Post
I am glad you posted this thread PASig. I am in the market for a new shed myself and trying to figure some things out as well.

I would like to do a concrete pad but don't know how much that would cost compared to the cinder block version Black posted?

The shed size I am looking for is a 10' x 12' or more likely a 12' x 14'.
 
Posts: 7859 | Location: NE Ohio | Registered: July 03, 2001Reply With QuoteReport This Post
Member
Picture of P250UA5
posted Hide Post
We're house/property hunting & per my mower thread, this one is timely, as mower storage will be a priority if not already in place.




The Enemy's gate is down.
 
Posts: 16136 | Location: Spring, TX | Registered: July 11, 2011Reply With QuoteReport This Post
The cake is a lie!
Picture of Nismo
posted Hide Post
My uncle did bricks with sand. Seems to be holding up the last 10 years.

We built our own shed from scratch about 25 years ago, and we poured a slab of concrete with steel wire mesh.
 
Posts: 7455 | Location: CA | Registered: April 08, 2004Reply With QuoteReport This Post
Not as lean, not as mean,
Still a Marine
Picture of Gibb
posted Hide Post
All of our sheds are elevated either on concrete blocks or footers. I would never put one directly on the ground (even if using PT lumber).




I shall respect you until you open your mouth, from that point on, you must earn it yourself.
 
Posts: 3390 | Location: Southern Maine | Registered: February 10, 2008Reply With QuoteReport This Post
Truth Seeker
Picture of StorminNormin
posted Hide Post
Definitely should not be on the ground. Either raised by some type of cement blocks, or on a cement slab. I built mine myself and poured my own cement slab. I just had to replace all the siding after 21 years, which was a major pain and cost, because my sprinkler system was directly spraying the sides of the shed which had wood siding. I now replaced the siding with hardi plank and will change the sprinklers so they don’t directly hit the sides of the shed.




NRA Benefactor Life Member
 
Posts: 8822 | Location: The Lone Star State | Registered: July 07, 2008Reply With QuoteReport This Post
Member
posted Hide Post
at least where I live you pour a pad its a building and taxed. So I would check that. And a real pad is silly expensive. Anything that gets it off the ground works fine. I normally just put down a bed of gravel over fabric (for drainage and humidity control) then put it on PT. Alternatively put in a couple of sonotubes of concrete which you can easily do. But I built a minihorse runin on PT skids (so I could move it) and its in year 25 without issues, so with real PT lumber (not the crap at lowes) you can do that but you will have to search for PT lumber rated for ground contact.


“So in war, the way is to avoid what is strong, and strike at what is weak.”
 
Posts: 11217 | Registered: October 14, 2004Reply With QuoteReport This Post
Member
Picture of cparktd
posted Hide Post
quote:
Originally posted by PASig:

I always thought you had to put a shed on some sort of concrete pad


Had to... No
Should... Yes

Here, anything under 200 square feet is exempt from any building codes so a homeowner can do whatever.

Last one I added was 225 sq ft. I had to go full blown permit route including lot line set back rules.



Collecting dust.
 
Posts: 4198 | Location: Middle Tennessee | Registered: February 07, 2013Reply With QuoteReport This Post
semi-reformed sailor
Picture of MikeinNC
posted Hide Post
Where I live in the city, if your pour concrete, you need a permit. So a lot of sheds in the neighborhood are on skids, but I’ve seen them all put on pavers or crushed rock.so they don’t harbor snakes or other nasties. In a gap underneath



"Violence, naked force, has settled more issues in history than has any other factor.” Robert A. Heinlein

“You may beat me, but you will never win.” sigmonkey-2020

“A single round of buckshot to the torso almost always results in an immediate change of behavior.” Chris Baker
 
Posts: 11495 | Location: Temple, Texas! | Registered: October 07, 2006Reply With QuoteReport This Post
Truth Seeker
Picture of StorminNormin
posted Hide Post
quote:
Originally posted by cparktd:
quote:
Originally posted by PASig:

I always thought you had to put a shed on some sort of concrete pad


Had to... No
Should... Yes

Here, anything under 200 square feet is exempt from any building codes so a homeowner can do whatever.

Last one I added was 225 sq ft. I had to go full blown permit route including lot line set back rules.


Been a while since I built mine but I think it was about the same rules. I built just under the requirements for a permit, but still had to follow set back rules.




NRA Benefactor Life Member
 
Posts: 8822 | Location: The Lone Star State | Registered: July 07, 2008Reply With QuoteReport This Post
Irksome Whirling Dervish
Picture of Flashlightboy
posted Hide Post
I put one up 18 months ago that's 9x11.

It's on a pad that's 6" thick with rebar. 1 foot margins all the way around with a bit of slop on the pad for roof drainage. Concrete was 2,500 strength.

I like concrete because I'm in a high wind area and the shed has anchor points where you can attach it to the pad using using a small concrete bit an expanding anchor bolts.

Cost about $2,100 and took 3 days from start to pour.

The shed is a poly wood resin that will outlast me and the shed shows no signs of UV or weather wear.
 
Posts: 4272 | Location: "You can't just go to Walmart with a gift card and get a new brother." Janice Serrano | Registered: May 03, 2005Reply With QuoteReport This Post
Member
Picture of sigcrazy7
posted Hide Post
I’ve used these before, when I didn’t want to pour footers or a pad.



The blog discussing shed foundations where I got that pic.



Demand not that events should happen as you wish; but wish them to happen as they do happen, and you will go on well. -Epictetus
 
Posts: 8291 | Location: Utah | Registered: December 18, 2008Reply With QuoteReport This Post
Member
posted Hide Post
A concrete pad is expensive these days . I wouldn't pour concrete unless I was doing something permanent like a garage or workshop . I have had several lawn sheds that sat on concrete blocks . Works just fine .
 
Posts: 4318 | Location: Down in Louisiana . | Registered: February 27, 2009Reply With QuoteReport This Post
Member
Picture of Pyker
posted Hide Post
I bought 6 yards of road stone. Leveled it off with a slight fall front to rear. and sat the shed (16 x 32) on that. The shed itself is dead nuts level with cinder blocks where necessary. It's Amish built with real PT lumber for skids, rated for ground contact. I have ledger boards all around to keep the critters out from underneath. If I laid a pad to site it, it would cost a fortune and render me liable to increased property tax.

(I was quoted over $45k, plus the cost of the slab to have 16 x 32 one stick built by a construction company. This one cost me 18K delivered from Wisconsin)

It will outlast me.
 
Posts: 2763 | Location: Lake Country, Minnesota | Registered: September 06, 2019Reply With QuoteReport This Post
Republican in training
Picture of DonDraper
posted Hide Post
Go a little bigger than you think you need!


--------------------
I like Sigs and HK's, and maybe Glocks
 
Posts: 2283 | Location: SC | Registered: March 16, 2011Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Question About Sheds

© SIGforum 2024