SIGforum
Odd shaped propeller, any ideas?
July 13, 2020, 04:54 AM
MinnowOdd shaped propeller, any ideas?
A friend sent me a picture of this odd shaped propeller. Notice the rounded edges. Does anyone know what this is? I thought it could be a stirring blade.
https://imgur.com/gallery/brjmLS0
"Prepared in mind and resources" July 13, 2020, 05:17 AM
280noslerIt is decorative, and not for use - notice lack of pitch on the blades.
July 13, 2020, 05:26 AM
4MUL8RNo feature inside its hub to transfer torque from a shaft to the blades.
-------
Trying to simplify my life...
July 13, 2020, 07:18 AM
WoodmanReading the comments, the liquid tank mixer is a maybe. Not food prep, though. Lack of keyway could only mean it was not yet cut into the hub.
July 13, 2020, 07:32 AM
Sportshooterquote:
Originally posted by 280nosler:
It is decorative, and not for use - notice lack of pitch on the blades.
There is enough pitch for a low speed mixing application.
July 13, 2020, 08:02 AM
AglifterHow large is it? To me, it looks decorative.
There are low speed propellers used milk tanks, etc to prevent the cream from separating, but those were bronze or monel before stainless.
July 13, 2020, 01:55 PM
bendablewhere it was located might be of some help.
On a farm, in in a factory , 30,000 leagues under the sea, a giant pastry shop,
Safety, Situational Awareness and proficiency.
Neck Ties, Hats and ammo brass, Never ,ever touch'em w/o asking first
July 13, 2020, 02:04 PM
kkinaIt does look similar to marine-style mixing impellers, but I don't know about those big round ridges on the edges.
July 13, 2020, 02:04 PM
280noslerquote:
Originally posted by bendable:
where it was located might be of some help.
On a farm, in in a factory , 30,000 leagues under the sea, a giant pastry shop,
Food service have been using stainless steel since the 1930's, and that is rusted heavily, meaning it is high carbon. It would not efficiently move air, and the blades only have the slightest pitch.
July 13, 2020, 02:27 PM
lastmanstandingquote:
Originally posted by Aglifter:
How large is it? To me, it looks decorative.
There are low speed propellers used milk tanks, etc to prevent the cream from separating, but those were bronze or monel before stainless.
Milk tank agitators are usually paddles and not propeller style like the one in the pic. At least all the ones I've seen. I used to work dairy farms during the summers while in high school.
"Fixed fortifications are monuments to mans stupidity" - George S. Patton
July 13, 2020, 02:27 PM
MinnowThis was picked up in an antique store in Maine. It is roughly 32” in diameter.
"Prepared in mind and resources" July 13, 2020, 02:30 PM
egregoreWith the ridge around the entire perimeter of the blades, it can't possibly function as a propeller. It wouldn't make a very good fan or pump impeller, either.
July 13, 2020, 02:35 PM
HRKquote:
Originally posted by Minnow:
This was picked up in an antique store in Maine. It is roughly 32” in diameter.
Wall Art most likely, smooth edges so it won't cut anyone/thing
July 13, 2020, 04:20 PM
pbslingerI'll guess for some type of industrial blending, if not food since its iron, paint, fertilizer, animal feed or sewage?
Its strange to see a raised round edge on all sides of a propeller. Which means it either isn't intended to be efficient, or is decorative. It seems awfully large and heavy to be decorative. If it was decorative why would you add the mass around the edges that only makes it look unlike what it is trying copy and uses more iron to make.
July 13, 2020, 04:46 PM
BigSwedequote:
Originally posted by Minnow:
This was picked up in an antique store in Maine. It is roughly 32” in diameter.
Can you verify that it is cast iron or steel?
July 13, 2020, 06:46 PM
Minnowquote:
Originally posted by BigSwede:
quote:
Originally posted by Minnow:
This was picked up in an antique store in Maine. It is roughly 32” in diameter.
Can you verify that it is cast iron or steel?
I live to far away to get my hands on it. I was told a magnet will stick to it, which makes sense with what looks like rust all over.
"Prepared in mind and resources" July 13, 2020, 07:19 PM
jimmy123xIt looks like an auger of sorts.......
July 13, 2020, 07:25 PM
ersatzknarfThat's most assuredly for a ceiling fan

If not, one more for decorative.
July 13, 2020, 07:55 PM
motor59Could it be an unfinished casting?
Though for the life of me I can't think of an advantage to casting it that way...
suaviter in modo, fortiter in re
July 13, 2020, 09:17 PM
pbslingerquote:
Originally posted by motor59:
Could it be an unfinished casting?
Though for the life of me I can't think of an advantage to casting it that way...
It makes it less efficient as a propulsion or material mover device, but makes it more durable than a propeller that normally has sharper edges. It also makes it less likely to cut solids or semi solids it might be moving or blending.
I'm going to hazard it is for moving or pulverizing paper or wood pulp.