Page 1 2
Go | New | Find | Notify | Tools | Reply | |
| Member |
I've never owned a locking flex head ratchet. With that out of the way, I can say that with a screw for a pivot that you can use to adjust the tension on the head, the Snap On flex head ratchets I have are much preferred over the old Craftsman flex head ratchets I have with a pivot pin rather than bolt and a spring detent head indexing method. Those are way too floppy for me. I have a long handle flex head Proto 1/2 ratchet that also has a pinch bolt as well and it has also done well even with a cheater on it. If I'm really torquing on something and I'm afraid the tool is going to move in a way that would hurt me or what I am working on, I'm generally going to try and use a breaker bar. They do make ratcheting adapters you can use on them as well though they definitely add a bit of length to things. | |||
|
| Just because you can, doesn't mean you should |
You could also get a foot or two of the appropriate size heater hose and cut to length to slide over the handle. Should be a snug fit and you can use silicone spray to put it on. If you don't like it or want to replace it, a razor knife gets it off quickly. ___________________________ Avoid buying ChiCom/CCP products whenever possible. | |||
|
| Bodhisattva |
I have plasti-dipped ratchet handles for more grip. You could add layers for more cushion. | |||
|
| Edge seeking Sharp blade! |
If you haven't needed a long 1/2" ratchet yet, you'll likely not wear out a comfort grip handle. These Carlyle at NAPA are pretty beefy. I have a shorter one I used the other day and liked it. https://www.napaonline.com/en/p/CHTCR1290GL For a hundred more you can get this Hazet German extendable that'll handle about anything a home mechanic might need. I have one but haven't used it yet. https://www.kctool.com/hazet-9...-ratchet-extendable/ This is a good deal on a long Hazet ratchet: https://www.amazon.com/Hazet-9...ls%2C117&sr=1-4&th=1 | |||
|
Alienator |
I have both. You can pick up cheap extendable rachets from Home Depot. They pretty useful. SIG556 Classic P220 Carry SAS Gen 2 SAO SP2022 9mm German Triple Serial P938 SAS P365 FDE P322 FDE Psalm 118:24 "This is the day which the Lord hath made; we will rejoice and be glad in it" | |||
|
| Leftists, what more needs to be said? |
I bought the Tekton 3/8” drive 12” ratchet in full polish fixed head. 5/8” heater hose made a nice grip for it. Damn this is a nice ratchet. The only others I own are 80’s Craftsman and Ace Hardware ratchets. | |||
|
| Buy that Classic SIG in All Stainless, No rail wear will be painless.  |
The last time I observed a Snap On truck servicing our local small town Ford Dealership, I took a photo of the guy's contact info near the door of the Snap On truck. That photo paid off. I made a contact in my phone for Snap On Dealer. I have three Snap On 1/4" drive ratchets. One short, one long, and one long/flex head. I haven't used them professionally since 1997 or so. Over time, what was once three, became two, and recently down to one that was usable. The ratchet heads will break off a tooth occasionally. Especially if you are being lazy and "should have" walked to the toolbox and went up to a 3/8" ratchet & socket. I texted the Snap On guy and asked what day and time he expected to be at the Ford Dealership. He texted me when he arrived at Ford and it took me about 10 minutes to drive there. He rebuilt both of the broken ratchets and installed a new head repair kit in each. All three are good as new now, he cleaned and oiled the guts on the one ratchet that still operated. I bought those Snap On 1/4' drive ratchets in the early to mid 1980's. Total cost of the ratchet repairs and cleaning/oiling? Zero! Snap On tools, buy once and cry once. I recently broke a Mac 1/2" drive deep impact socket, 11/16" size. I emailed Mac Tools corporate and asked for the contact info for a local Mac Tools dealer. None available in my area. It cost almost $20 for UPS shipping sending it back to Mac Tools in Ohio. I know it arrived on their loading dock, I got the UPS notification. Haven't heard a peep from Mac, or a new replacement socket. NRA Benefactor Life Member NRA Instructor USPSA Chief Range Officer | |||
|
| Leftists, what more needs to be said? |
That’s not the kind of story you hear when they’re trying to sell you a $700 set of combo wrenches though is it? | |||
|
Shaman |
I have both and now use the extendable Harbor Freight ones almost exclusively. I've yet to break one. Took me a minute to get used to the rubber grip. I have a red one that's 10 years old now. The grip has turned almost black now. But it's still as secure and the new green ones.(I have 5 total for wen we all tackle a project) For $14, they're and incredible value. I've retire all of my vintage Craftsman stuff.  He who fights with monsters might take care lest he thereby become a monster. | |||
|
| If you see me running try to keep up  |
What I was thinking, I just finished up a to of works yesterday on my 4Runner. I made good use of the Milwaukee work gloves, they have rubber palms and fingers. It helps with grip and when working with greasy stuff. I throw them in the washer and they are good to go the next time. You can also get them cut resistant. Here is what they look like, I get mine at the Home Despot. https://www.milwaukeetool.com/...-gloves-s/48-22-8910 | |||
|
| If you see me running try to keep up |
I’m not a mechanic by trade but I use hand tools regularly at my day job and have been doing my own auto work for the last 35 years. I have never broken a ratchet, but if I do, I have 10 others to use. I have some Snap-On at home and have them at work. I also have other brands like the old Proto and several others. The Snap-On are nice but I see no difference between that and my others. I had a full set of Snap-On 1/4 and 3/8 drive sockets, combo wrenches, screw drivers, nut drivers and adjustable wrenches. They looked nice but function just like any other brand from y experience. | |||
|
| Member |
Something not mentioned with soft handles. if you have to use a cheater pipe it could crush the soft material. As mentioned use gloves and stick with all steel. | |||
|
Member |
Matco Locking Flex. Same quality as Snappy, being a locker it won't slip, you won't have to smash your hand and get in trouble with your wife for all the thoroughly justified cussing. There is a Matco Retail Specialist on Ebay who will sell you any Matco ratchet made, brand new from the factory, for much less than buying it off a Matco truck. I've bought a few pieces from him over recent years. Honest as the day is long, thousands of 100% ratings. I believe his business model is to buy up inventory left over from Matco guys who are retiring or getting out of the business. Apparently it's a thing since there are other specialists like him on Ebay dealing in other top of the line Truck tool brands. I like Matco 88 ratchets, very smooth, top of the line professional grade ratchets. Lover of the US Constitution Wile E. Coyote School of DIY Disaster | |||
|
| Member |
I have soft grip rachets that are 15 years old and just fine. If you NEED a soft grip ratchet, go buy one. | |||
|
| Buy that Classic SIG in All Stainless, No rail wear will be painless. |
I got a UPS notification that a package is being delivered on Monday, June 1st. That surprised me as I haven't ordered anything recently. I checked the detailed tracking information and it's coming from Columbus, Ohio. Then I had the "lightbulb" moment, that pesky broken Mac Tools impact socket. Zero communication from Mac, it's likely a new socket. I don't believe they would ship me the old broken socket. I guess I will find out tomorrow. I shipped the broken socket out to Mac Tools on May 20th and we had the long Memorial Day holiday weekend in the mix. Driving down to meet the Snap On truck at the Ford dealership was much faster and cheaper. NRA Benefactor Life Member NRA Instructor USPSA Chief Range Officer | |||
|
| Powered by Social Strata | Page 1 2 |
 | Please Wait. Your request is being processed... |
|
© SIGforum 2026