SIGforum
Best way to repair a garden hose?
October 26, 2018, 04:07 PM
SigM4Best way to repair a garden hose?
Question for anyone that knows. Have a good quality 50 ft hose that’s developed a bulge/leak. Not wanting to throw away the entire thing, thinking of cutting out the bad section and making two smaller hoses (easier for the wife to drag when watering plants).
Any suggestions on replacement pieces for both male and female ends? The Home Depot parts I’ve used in the past were always subpar.
Success always occurs in private, and failure in full view.
Complacency sucks… October 26, 2018, 04:10 PM
bigdealJust replace the hose. Repairing hoses is a fool's errand. Trust me, I've been that fool a couple times, but no more.
-----------------------------
Guns are awesome because they shoot solid lead freedom. Every man should have several guns. And several dogs, because a man with a cat is a woman. Kurt Schlichter
October 26, 2018, 04:11 PM
comet24 use the middle oneClick the link, pick 1/2" or 3/4".
_____________________________________
Because in the end, you won’t remember the time you spent working in the office or mowing your lawn. Climb that goddamn mountain. Jack Kerouac
October 26, 2018, 04:12 PM
lymanlowes makes a splice kit type
basically a brass double ended piece (has a raised section in the middle to butt the hose against, ) and 2 clamps,
used a couple over the years
https://chandlersfirearms.com/chesterfield-armament/
October 26, 2018, 04:20 PM
4MUL8RI never have been able to get a good seal on the replacement hose ends.
-------
Trying to simplify my life...
October 26, 2018, 04:24 PM
old rugged crossI personally like the ones, either brass or plastic that have the internal barb fitting but instead of a hose clamp on the outside, they have a two piece clamp with two screws that hold it in place. ymmv
"Practice like you want to play in the game"
October 26, 2018, 04:45 PM
signewtI've tried them all, some actually are satisfactory for years. Others, not so much.
I have better results with the brass repair fittings than the plastic ones, despite considerable price break it is sometimes hard to tell what the best choice is.
It's hard to get a decade out of any of them any more regardless of what they cost new.
**************~~~~~~~~~~
"I've been on this rock too long to bother with these liars any more."
~SIGforum advisor~
"When the pain of staying the same outweighs the pain of change, then change will come."~~sigmonkey
October 26, 2018, 04:46 PM
bigmuleDon’t expect to deploy it like a fireman....
October 26, 2018, 04:46 PM
ZecpullI like the idea of making it 2 hoses rather than trying to fix the middle. Then if it still goes bad you can save the ends.
_______________________________
'The true soldier fights not because he hates what is in front of him, but
> because he loves what is behind him.' G. K. Chesterton
NRA Endowment Life member
NRA Pistol instructor...and Range Safety instructor
Women On Target Instructor. October 26, 2018, 04:47 PM
sredingIf the hose is a 'non kink' kind fixing it will be very difficult. Often those hoses are not round inside, but rather hex shaped which gives then that ability to continue to flow when kinked. The only way I've found to repair those is to heat a brass barb with a torch and the hose itself with a heat gun and then assemble so the hose melts a bit around the barb. The clamshell style clamps work the best for this. Usually it takes a couple tries to get to to seal without leaking.
I've given up on good hoses until the kids are gone since they seem to run them over with the car or mower and wreck them. I just plan to buy new cheap hoses every year.
Shawn
I reject your reality and substitute my own.
--Adam Savage, MythBusters
October 26, 2018, 04:53 PM
zipridersonwe seem to buy a new hose every season. they naturally kink, leak, etc. oh well.
October 26, 2018, 05:05 PM
45 CalSears black rubber hose and throw the junk away.
If it is just busted and you repair,be sure to buy extra splicing kits,you will need soon.
Not trying to bust your chops ,just being honest.
October 26, 2018, 05:24 PM
shiftyvtecAlso, I have noticed almost all fittings in the garden hose section that appear to be brass are just cheap anodized gold aluminum. Aluminum performs just as well in this application (garden hose accessories), except in the corrosion resistance aspect. It just pisses me off they try and fool you.
October 26, 2018, 05:54 PM
tatortoddquote:
Originally posted by signewt:
I've tried them all, some actually are satisfactory for years. Others, not so much.
I have better results with the brass repair fittings than the plastic ones, despite considerable price break it is sometimes hard to tell what the best choice is.
It's hard to get a decade out of any of them any more regardless of what they cost new.
The problem I've encountered recently at Deep Homo and Lowe's is that they're painting/anodizing pot metal to brass color and you have to be very careful with what you're buying the brass colored pot metal is worse than plastic.
Ego is the anesthesia that deadens the pain of stupidity
DISCLAIMER: These are the author's own personal views and do not represent the views of the author's employer.
Safety, Situational Awareness and proficiency.
Neck Ties, Hats and ammo brass, Never ,ever touch'em w/o asking first
October 26, 2018, 06:34 PM
220-9erUnless this is an exceptionally high quality hose, just throw it away and buy another one.
___________________________
Avoid buying ChiCom/CCP products whenever possible.
October 26, 2018, 08:01 PM
ZSMICHAELJust use it to beat someone.
October 26, 2018, 08:50 PM
BassamaticI've cut up and used hose pieces for years and they are all still working just fine. Just make sure you use genuine brass and not plastic.
.....never marry a woman who is mean to your waitress. October 26, 2018, 09:23 PM
Snapping TwigRescue tape FTW.
October 27, 2018, 07:59 AM
WoodmanI've used male and female ends, and splined couplings over the years. Brass seems best but with enough wear, and with a bit of dry-rot in the hose, they seem to fail.
The 50' Craftsman hose is a great value; never had to bring one back. I've cut them up for all types of purpose-length hoses for resizing.
You're a train guy? I tried truck-camping in NM but it turned out I was a few hundred yards from the Scholle Siding. A freight train pulling out in the middle of an otherwise deathly quiet desert sounds like a set of gigantic medal dominos toppling over upon themselves.