SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Wiring help-2009 Full size Chev pickup
Go
New
Find
Notify
Tools
Reply
  
Wiring help-2009 Full size Chev pickup Login/Join 
Never miss an
opportunity to STFU
posted
My neighbor has the truck set up to tow, every thing is there, harness, connectors and all. I took my VOM and used it to probe the pins of the bulkhead connector where the trailer pigtail connects. I got zip nada no matter what the VOM was set on. It would sometimes jump up a few numbers then return to zero. I used 2 different meters so I know they are working but both with same results.

I then got underneath and pulled the tan connecter that sits as a group of 3 connectors forward of the rear bumper. Same thing with key on or off, or with lights on off. Any technicians work on any of these trucks and have any suggestions for tests? Places to Check?

I assume the harness runs down the drivers side then splits. Do the tail lamps have independent wires that plug into a connector in the middle of the rear separately? Does the rear harness run from one side to the other as one piece? Do I need a different tester?

Thanks In advance.




Never be more than one step away from your sword-Old Greek Wisdom
 
Posts: 2295 | Location: SE Mich-- USA | Registered: September 10, 2002Reply With QuoteReport This Post
To all of you who are serving or have served our country, Thank You
Picture of Jelly
posted Hide Post
 
Posts: 2681 | Registered: March 15, 2004Reply With QuoteReport This Post
Member
posted Hide Post
Need to put the fuse in. Usually the fuse was taped to the pigtail and put in glove compartment.


NRA Life Member
 
Posts: 252 | Location: Kiawah Island, SC | Registered: July 25, 2011Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Wiring help-2009 Full size Chev pickup

© SIGforum 2024