SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Question About Tires
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
Question About Tires Login/Join 
אַרְיֵה
Picture of V-Tail
posted
Edit: OOPS! Chowser spotted a typo that I made. It's a 1994 940. I mistakenly typed the year as 1984.

We have an old Volvo that we keep for backup, if either my wife's primary car or mine is out of service, for maintenance. It's a 1984 1994 sedan, a 940.

The car is generally used for way less than 1,000 miles / year.

The tires that are on it have plenty of tread, but they have been there for many years, Florida heat, and I'm not sure that I trust them, especially at interstate highway speeds.

I'm looking to replace them with a new set of low-cost tires. Low cost, because they will likely be discarded for age, way before they wear out due to road use.

I am getting conflicting information on the size:
  • Tire Rack website says 185/60-R15

  • Discount Tire website says 195/65-R15
Which source should I trust? Or, if these two sizes will both do the job, which size should I pick, and why?

This message has been edited. Last edited by: V-Tail,



הרחפת שלי מלאה בצלופחים
 
Posts: 31718 | Location: Central Florida, Orlando area | Registered: January 03, 2010Reply With QuoteReport This Post
Member
Picture of PowerSurge
posted Hide Post
Go out and look on the sticker in the driver’s door jamb. It should have the size the car came with from the factory printed on it.


———————————————
The fool hath said in his heart, There is no God. Psalm 14:1
 
Posts: 4053 | Location: Northeast Georgia | Registered: November 18, 2017Reply With QuoteReport This Post
His diet consists of black
coffee, and sarcasm.
Picture of egregore
posted Hide Post
Look on the door jamb label (if present and undamaged) for the tire size.
 
Posts: 29082 | Location: Johnson City, TN | Registered: April 28, 2012Reply With QuoteReport This Post
and this little pig said:
posted Hide Post
The tires might be interchangeable. If I remember correctly, the first number represents the OD of the tire, the second number represents the width, and the 15 is the rim diameter. Go for cheap, in your case!
 
Posts: 3406 | Registered: February 07, 2003Reply With QuoteReport This Post
אַרְיֵה
Picture of V-Tail
posted Hide Post
PowerSurge and egregore have the correct response of course, but the car is at another location right now and I was hoping to order the tires today.



הרחפת שלי מלאה בצלופחים
 
Posts: 31718 | Location: Central Florida, Orlando area | Registered: January 03, 2010Reply With QuoteReport This Post
Member
Picture of PowerSurge
posted Hide Post
Then I’d go with the 195/65-15’s. The wider 60’s would probably fit, but there’s always the chance on the front they might rub when the wheels are turned to lock.


———————————————
The fool hath said in his heart, There is no God. Psalm 14:1
 
Posts: 4053 | Location: Northeast Georgia | Registered: November 18, 2017Reply With QuoteReport This Post
quarter MOA visionary
Picture of smschulz
posted Hide Post
Compare your WHEEL specifications with the tires below to see how they fit.




 
Posts: 23427 | Location: Houston, TX | Registered: June 11, 2006Reply With QuoteReport This Post
Age Quod Agis
Picture of ArtieS
posted Hide Post
Personally, I'd go with the wider tire, even though it's only 1cm more width, and 5% more sidewall. More contact patch, slightly more compliant ride.

Or, you could put 22s on that bad boy and go full hooptie.



"I vowed to myself to fight against evil more completely and more wholeheartedly than I ever did before. . . . That’s the only way to pay back part of that vast debt, to live up to and try to fulfill that tremendous obligation."

Alfred Hornik, Sunday, December 2, 1945 to his family, on his continuing duty to others for surviving WW II.
 
Posts: 13053 | Location: Central Florida | Registered: November 02, 2008Reply With QuoteReport This Post
Dean of Law
Picture of heavyd
posted Hide Post
Cheap new tires are probably about as reliable as old name brand tires, unless the older tires are dry rotted.


H. Dean Phillips
$150 Gun Trusts
https://nfalawyers.com
 
Posts: 6617 | Location: Georgia | Registered: December 02, 2005Reply With QuoteReport This Post
"Member"
Picture of cas
posted Hide Post
I'd go with whats cheaper if you're never going to drive it.


_____________________________________________________
Sliced bread, the greatest thing since the 1911.

 
Posts: 21528 | Location: 18th & Fairfax  | Registered: May 17, 2003Reply With QuoteReport This Post
quarter MOA visionary
Picture of smschulz
posted Hide Post
These two are quite a bit different in size.
Wider is better for traction.
Taller will reduce performance (torque).
Be sure if taller that everything clears.
 
Posts: 23427 | Location: Houston, TX | Registered: June 11, 2006Reply With QuoteReport This Post
אַרְיֵה
Picture of V-Tail
posted Hide Post
quote:
Originally posted by heavyd:

Cheap new tires are probably about as reliable as old name brand tires, unless the older tires are dry rotted.
Dry rot is what I'm concerned about, with the age, in the Florida sun. Current tires are around ten years old. The car sits outside. Mucho ultra-violet.



הרחפת שלי מלאה בצלופחים
 
Posts: 31718 | Location: Central Florida, Orlando area | Registered: January 03, 2010Reply With QuoteReport This Post
Victim of Life's
Circumstances
Picture of doublesharp
posted Hide Post
I'd go to Walmart and buy 195/65/15 Cooper Evolution Tour all season for $52 each.

https://www.walmart.com/ip/COO...5-91T-Tire/335040576


________________________
God spelled backwards is dog
 
Posts: 4870 | Location: Sunnyside of Louisville | Registered: July 04, 2007Reply With QuoteReport This Post
Gone but Together Again.
Dad & Uncle
Picture of h2oys
posted Hide Post
quote:
Originally posted by ArtieS:
Personally, I'd go with the wider tire, even though it's only 1cm more width, and 5% more sidewall. More contact patch, slightly more compliant ride.


I'm with Artie
 
Posts: 3859 | Location: St. Louis, MO | Registered: November 24, 2009Reply With QuoteReport This Post
For real?
Picture of Chowser
posted Hide Post
Did they have a 940 in 1984? I thought the 900 series started in the 90s.

All I can find for 1984 is 740.

Volvo 740 Tire Sizes
1984

GLE
185/70R14

Turbo
195/60R15



Not minority enough!
 
Posts: 8250 | Location: Cleveland, OH | Registered: August 09, 2007Reply With QuoteReport This Post
Member
posted Hide Post
IMO both tires that have been suggested are technically NOT correct for your Volvo.

Unfortunately tires that were perfectly functional back in the mid 80's have gone out of fashion so you are left choosing what will fit and is available and those are what were considered "low Profile" tires in 1984. Most sedans of that ere would have had 70 or 75 series profile tires mounted from the factory, the 60 and 65 series tires came standard on cars like the Z28 Camaro's, Corvettes, Porsche's, and high performance BMW models. IN the late 80's the 50 series tires started to show up and IIRC the Z51 Corvette was the first production car to feature 50 series tires from the factory.

Note, the tire numbering system is Width in mm followed by the Profile Ratio and then the wheel diameter. The Profile ratio is the ratio of the Sidewall Height to the Tread Width. A 60 series tire will have a sidewall height that is 60% of the width of the tread, a 20 series tire will have a sidewall height that is 20% of the tread width (and look like a bandaid wrapped around a wheel)

Back in 1974 most sedans would be running a 70 series tire and my hunch is that the tag on your Volvo will probably be something like 195/70 x 15. This is a tire size that is limited in availability and likely hard to find. 195/70 x 15 has 5.374 inch sidewall height. So your original rolling diameter was in the range of 25.75 inches if this is the size your car came with.

This means that you pretty much have an open field as far as tire selection is concerned so don't worry about the rolling diameter just get what you can find and offers the best balance between all weather traction and cost. Back in 1984 we didn't have anti lock brakes or traction control systems so changing the rolling diameter just meant the engine would be turning either faster or slower at a given speed. Note, it will mean that your speedometer calibration will be off. IF you have a portable GPS such as a Garmin Nuvi use the GPS based speed indicator to determine your true speed at certain indicated speeds (30. 45, 60, 75). If you want to see what impact that would actually is to take your Original diameter and divide that by the New rolling diameter. That will give you a multiplier that you can use to determine the new engine rpm's for say 60 mph. Basically, go smaller in rolling diameter and your engine will rev higher.

Final note, and this one concerns SAFETY. You may be able to find tires in your original diameter if you look at Trailer Tires. Trying to use Trailer Tires as passenger tires on a car is NOT safe and may actually be a violation of Federal Law. The reason it's unsafe is that trailer tires were designed to just Roll, they were NOT designed to be a drive tire and if used in that application will probably produce a blowout at some point. In addition trailer tires are constructed out of UV resistant compounds and with a very low rate of wear. As a result the traction of a trailer tire is quite poor in a direct comparison to passenger car tires. I will also note that the majority of trailer tires today are still Bias Ply tires, so the basic construction method dates back to the 1950's. So, DO NOT even think about substituting trailer tires even if they are less than half the cost.


I've stopped counting.
 
Posts: 5784 | Location: Michigan | Registered: November 07, 2008Reply With QuoteReport This Post
אַרְיֵה
Picture of V-Tail
posted Hide Post
quote:
Originally posted by Chowser:

Did they have a 940 in 1984? I thought the 900 series started in the 90s.

All I can find for 1984 is 740.

Volvo 740 Tire Sizes
1984

GLE
185/70R14

Turbo
195/60R15
A typo on my part.

It is a 1994, not 1984. Yes, it is a 940.



הרחפת שלי מלאה בצלופחים
 
Posts: 31718 | Location: Central Florida, Orlando area | Registered: January 03, 2010Reply With QuoteReport This Post
Member
Picture of Krazeehorse
posted Hide Post
According to my guide the base model takes 185/65-15. The T or turbo model takes 195/65-15 or 205/55-16. You should be able to buy 40K American made tires for around $75 or less mounted, balanced and new valve stems.


_____________________

Be careful what you tolerate. You are teaching people how to treat you.
 
Posts: 5759 | Location: Ohio | Registered: December 27, 2008Reply With QuoteReport This Post
Member
posted Hide Post
all that info should be on the tire as well...


Houston Texas, if the heat don't kill ya, the skeeters will.
 
Posts: 359 | Location: TEXAS | Registered: September 02, 2009Reply With QuoteReport This Post
Member
posted Hide Post
tire rack provides the tires only.

discount provides everything, mount, balance, flat repairs, rotation, re-balance for the life of the tires.
 
Posts: 2245 | Registered: October 17, 2013Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Question About Tires

© SIGforum 2024