SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Hand gun cleaning kit or must have
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
Hand gun cleaning kit or must have Login/Join 
Member
Picture of iron chef
posted Hide Post
quote:
Originally posted by V-Tail:
quote:
Originally posted by davetruong:
Thank you all! Now time to invest in an ultrasonic
I've been told that they are good for cleaning jewelry, too.
Big Grin
 
Posts: 3414 | Location: Texas | Registered: June 17, 2003Reply With QuoteReport This Post
Prepared for the Worst, Providing the Best
Picture of 92fstech
posted Hide Post
I've accumulated a large toolbox of stuff over time. Off the top of my head:

Patches, various sizes.
Scissors for cutting patches
Q tips
Silicon cloth
Rags

Oil
Solvent (I like hoppes 9)
JB Bore paste
Brake cleaner
Lubriplate grease
Silicone oil Dot 5 brake fluid for supressor baffles
Isopropyl alcohol for lens cleaning

Nylon brush
Brass brush
Steel "carding" brush
Brass Bore Brushes
Steel chamber brushes (great for getting lead out of revolver cylinders)
Tornado brushes
Lewis Lead remover
AR chamber brushes
Dental picks
Bore jags

Brass cleaning rods for pistol and rifle
Blue Loctite (in case you need to remove screws to clean under something)
Screwdriver kit with assortment of flat-ground bits
Air compressor with blow gun (I use this all the time, but you have to be careful to not blow parts off the gun and I also wouldn't use one in the house!)
 
Posts: 9827 | Location: In the Cornfields | Registered: May 25, 2006Reply With QuoteReport This Post
Member
Picture of Ironmike57
posted Hide Post
I second that. Stuff works when others don’t.

quote:
Originally posted by SIGfourme:
Bore tech cleaners. No smell- water soluble. Works well.
 
Posts: 2099 | Location: Florida | Registered: July 26, 2010Reply With QuoteReport This Post
Member
Picture of Ironmike57
posted Hide Post
I did the same with a can of spray glue back in art school. It sucked!

quote:
Originally posted by Fredward:
Caution-when using brake cleaner, wear wrap around, close fitting safety glasses. Last summer I had the nozzle backwards and got a blast dead in both eyes. I ran for the kitchen dish rinsing gun thing and flushed until the kitchen floor was thoroughly soaked. This was another accident that COULD have been avoided. On the other hand, a 60's era Great Western 22 revolver that had been totally gunked up got nice and clean.
 
Posts: 2099 | Location: Florida | Registered: July 26, 2010Reply With QuoteReport This Post
אַרְיֵה
Picture of V-Tail
posted Hide Post
quote:
Originally posted by MikeinNC:

Can of break cleaner
I was told to use only the non-chlorinated type for cleaning firearms.



הרחפת שלי מלאה בצלופחים
 
Posts: 31930 | Location: Central Florida, Orlando area | Registered: January 03, 2010Reply With QuoteReport This Post
Member
posted Hide Post
I agree with having a set of gunsmith/firearm related screwdriver bits. Very handy for not destroying grip screws/parts.
 
Posts: 7290 | Location: Treasure Coast,Fl. | Registered: July 04, 2003Reply With QuoteReport This Post
semi-reformed sailor
Picture of MikeinNC
posted Hide Post
quote:
Originally posted by V-Tail:
quote:
Originally posted by MikeinNC:

Can of break cleaner
I was told to use only the non-chlorinated type for cleaning firearms.


All the break cleaner stuff I’ve seen in the stores is non-chlorinated. But you are right, stay away from that.



"Violence, naked force, has settled more issues in history than has any other factor.” Robert A. Heinlein

“You may beat me, but you will never win.” sigmonkey-2020

“A single round of buckshot to the torso almost always results in an immediate change of behavior.” Chris Baker
 
Posts: 11649 | Location: Temple, Texas! | Registered: October 07, 2006Reply With QuoteReport This Post
Member
posted Hide Post
Alot of great suggestions here.
A pull through bore snake (Otis or Hoppes)
A lead away cloth (for the front a revolver cylinder)
A chamber brush can be useful too.
A good nylon brush will do alot of work for you.

If you go ultrasonic, check through some of the threads. There are considerations on what to use as the cleaning liquid and also on how much lubrication is need afterwards.
 
Posts: 4864 | Location: Where ever Uncle Sam Sends Me | Registered: March 05, 2007Reply With QuoteReport This Post
I made it so far,
now I'll go for more
Picture of rbert0005
posted Hide Post
I just checked Brownels for the unit I had.


I am no expert, but think I am sometimes.
 
Posts: 4613 | Location: South Carolina | Registered: January 23, 2004Reply With QuoteReport This Post
non ducor, duco
Picture of Nickelsig229
posted Hide Post
https://www.amazon.com/Tipton-...06&sr=8-5&th=1&psc=1



I gave up on screw together barrel rods. I am also not in the Kit group.




First In Last Out
 
Posts: 4929 | Location: CT | Registered: October 15, 2002Reply With QuoteReport This Post
Bone 4 Tuna
Picture of jjkroll32
posted Hide Post
Ransom Master Mat
$30 through brownells


_________________________
An unarmed man can only flee from evil and evil is not overcome by fleeing from it. - Col Jeff Cooper

NRA Life Member

Long Live the Super Thirty-Eight
 
Posts: 11168 | Location: Mid-Michigan | Registered: October 02, 2007Reply With QuoteReport This Post
Caribou gorn
Picture of YellowJacket
posted Hide Post
quote:
Originally posted by Fredward:
Caution-when using brake cleaner, wear wrap around, close fitting safety glasses. Last summer I had the nozzle backwards and got a blast dead in both eyes. I ran for the kitchen dish rinsing gun thing and flushed until the kitchen floor was thoroughly soaked. This was another accident that COULD have been avoided. On the other hand, a 60's era Great Western 22 revolver that had been totally gunked up got nice and clean.

“You’ll shout your eye out, kid.”

(Glad you’re alright!)



I'm gonna vote for the funniest frog with the loudest croak on the highest log.
 
Posts: 10717 | Location: Marietta, GA | Registered: February 10, 2009Reply With QuoteReport This Post
Member
posted Hide Post
I am looking at a parts tray at Harbor freight that is soft and somewhat pliable
Catalog #22416
$24.00

Have not purchased it yet.





Safety, Situational Awareness and proficiency.



Neck Ties, Hats and ammo brass, Never ,ever touch'em w/o asking first
 
Posts: 55463 | Location: Henry County , Il | Registered: February 10, 2004Reply With QuoteReport This Post
The cake is a lie!
Picture of Nismo
posted Hide Post
quote:
Originally posted by bendable:
I am looking at a parts tray at Harbor freight that is soft and somewhat pliable
Catalog #22416
$24.00

Have not purchased it yet.


Just get a dog food tray for $7. I have 2 of them.
https://www.amazon.com/gp/prod...n_title?ie=UTF8&th=1
 
Posts: 7471 | Location: CA | Registered: April 08, 2004Reply With QuoteReport This Post
Frog in boiling water
posted Hide Post
Tackle box is a great idea.
Thanks for that, I’ve got everything stuffed in a walkers butter cookie tin.


 
Posts: 436 | Location: Long Island,N. Y.  | Registered: November 08, 2009Reply With QuoteReport This Post
Member
posted Hide Post
"Just get a dog food tray for $7. I have 2 of them.
https://www.amazon.com/gp/prod...n_title?ie=UTF8&th=1[/QUOTE]"

Do they hold up against the cleaners , solvents and lubricants involved
with firearm maintenance ?





Safety, Situational Awareness and proficiency.



Neck Ties, Hats and ammo brass, Never ,ever touch'em w/o asking first
 
Posts: 55463 | Location: Henry County , Il | Registered: February 10, 2004Reply With QuoteReport This Post
Member
Picture of Beanhead
posted Hide Post
I use a yoga mat that is cut up to about the size of a placemat. After a few use, toss and cut another one out.
 
Posts: 1372 | Location: Georgia | Registered: May 27, 2009Reply With QuoteReport This Post
Member
posted Hide Post
Thanks for the dog food mat tip. Ordered!


End of Earth: 2 Miles
Upper Peninsula: 4 Miles
 
Posts: 16716 | Location: Marquette MI | Registered: July 08, 2014Reply With QuoteReport This Post
Hop head
Picture of lyman
posted Hide Post
quote:
Originally posted by kz1000:
Ballistol.


and kroil,


ala cart the rest,

no store bought kit I have seen had everything needed



https://chandlersfirearms.com/chesterfield-armament/
 
Posts: 10731 | Location: Beach VA,not VA Beach | Registered: July 17, 2007Reply With QuoteReport This Post
No ethanol!
posted Hide Post
I like to use rods and jag, with a brushing after barrel has soaked a bit. If i venture to the range, I'll often have more than 2 to clean so to make things easy I recommend 2 rods, so I can leave jag on one, and brush on the other.

Also, a cheapie bottle of alcohol to rinse the crud off brush and jag, and store till next time.


------------------
The plural of anecdote is not data. -Frank Kotsonis
 
Posts: 2142 | Location: Berks Co PA | Registered: December 20, 2006Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Hand gun cleaning kit or must have

© SIGforum 2025