SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Any one had good luck with rotor/pad kits from Rockauto?
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
Any one had good luck with rotor/pad kits from Rockauto? Login/Join 
Member
posted
I'm helping my adult daughter keep her 2009 Honda Fit in working condition by doing the maintenance on schedule and using good parts.

Now at 100K, I've got to replace the replace the front rotors. At 75K miles, I had the OEM rotors turned and used Akebono pads.

If I go back to Honda parts, I'm looking at $300 in parts. If I use ACKOJA rotors (owned by a German outfit, but likely made in China) and Akebono pads, I'm just under $200 on Rockauto.

I'm tempted by the various rotor/pad kits for $70-90 for the front axles (PowerStop, R1, Raybestos, Centric) from Rockauto.

Has anyone had good results with these kits?


P229
 
Posts: 4003 | Location: Sacramento, CA | Registered: November 21, 2008Reply With QuoteReport This Post
Thank you
Very little
Picture of HRK
posted Hide Post
Yes I have bought rotors and pads from them, you just need to decide what level you want from budget to premium for the vehicle.

Everything was shipped on time and arrived unscathed.
 
Posts: 25266 | Location: Gunshine State | Registered: November 07, 2008Reply With QuoteReport This Post
Member
Picture of P250UA5
posted Hide Post
Never had any problems with RockAuto.

Coworker [2016 Colorado w/ 186k on it] actually bought his last set of pads/rotors on Amazon.
I was skeptical, but they looked like a decent kit when we installed them.




The Enemy's gate is down.
 
Posts: 16723 | Location: Spring, TX | Registered: July 11, 2011Reply With QuoteReport This Post
Savor the limelight
posted Hide Post
I’ve never had a problem with Rockauto itself.

I put a Raybestos kit front and rear on the Odyssey with good results. I think it was called Element 3 or something like that.

I put Powerstop kits front and rear on the F350 and the pads started separating from their backing plate. Powerstop sent me new pads, but I bought and installed Raybestos instead. The Powerstop rotors are holing up though.

Like HRK said though, you pick the level of quality you want. Powerstop were supposed to be premium. The problem with asking people about their experiences is that those experiences may not be directly transferable to your application. I mean how applicable is that Powerstop pad failure on my F350 towing a 14,500lb 5th wheel to your daughter’s Honda Fit?
 
Posts: 12506 | Location: SWFL | Registered: October 10, 2007Reply With QuoteReport This Post
Member
Picture of Rick Lee
posted Hide Post
Just make sure you plan to use whatever you order pretty soon. I often buy stuff long in advance so my order is big enough to get free shipping. I've had Rock Auto send me the wrong stuff before, but I didn't notice it until after the return period and I had to eat it.

I have Amazon Prime and you can get a lot of parts there too and get the free shipping, which is nice for heavy brake parts.
 
Posts: 4005 | Location: Cave Creek, AZ | Registered: October 24, 2005Reply With QuoteReport This Post
Thank you
Very little
Picture of HRK
posted Hide Post
quote:
Originally posted by P250UA5:
Never had any problems with RockAuto.

Coworker [2016 Colorado w/ 186k on it] actually bought his last set of pads/rotors on Amazon.
I was skeptical, but they looked like a decent kit when we installed them.


I've bought some stuff on Amazon but have been told that lots of the auto parts are fake, China copies Champion and AC plugs etc. Goes for other things non auto too..
 
Posts: 25266 | Location: Gunshine State | Registered: November 07, 2008Reply With QuoteReport This Post
Savor the limelight
posted Hide Post
Unless Amazon is the seller, I won’t buy auto parts from Amazon. Now cheap Chinese HAM radios are a different story.
 
Posts: 12506 | Location: SWFL | Registered: October 10, 2007Reply With QuoteReport This Post
Member
Picture of sourdough44
posted Hide Post
I usually get the ‘Ray Bestos’ parts, or the near equivalent.
 
Posts: 6680 | Location: WI | Registered: February 29, 2012Reply With QuoteReport This Post
Lawyers, Guns
and Money
Picture of chellim1
posted Hide Post
quote:
I'm tempted by the various rotor/pad kits for $70-90 for the front axles (PowerStop, R1, Raybestos, Centric) from Rockauto.

Has anyone had good results with these kits?

Yes. Good to go.



"Some things are apparent. Where government moves in, community retreats, civil society disintegrates and our ability to control our own destiny atrophies. The result is: families under siege; war in the streets; unapologetic expropriation of property; the precipitous decline of the rule of law; the rapid rise of corruption; the loss of civility and the triumph of deceit. The result is a debased, debauched culture which finds moral depravity entertaining and virtue contemptible."
-- Justice Janice Rogers Brown

"The United States government is the largest criminal enterprise on earth."
-rduckwor
 
Posts: 25498 | Location: St. Louis, MO | Registered: April 03, 2009Reply With QuoteReport This Post
Thank you
Very little
Picture of HRK
posted Hide Post
My understanding about Rock Auto is they work with manufacturers and wholesalers, then send the part order to that facility who fills it.

RockAuto has no parts warehouses, and inventories nothing. They are an order aggregator, they have accumulated parts lists sorted by car/use just like your local Advance/PepBoys/AutoZone store but they have everything that works for that application and you can choose the part(s) you like.

Basically a direct to consumer order system.
 
Posts: 25266 | Location: Gunshine State | Registered: November 07, 2008Reply With QuoteReport This Post
Member
posted Hide Post
Thanks all for the input. I'm a Rockauto fanboi and have purchased tons of stuff from them, but never these rotor/pad combo kits.

I'm placed an order for the Centric and will see how it goes. For $105 total, if she gets 10-15K miles, I won't be disappointed.


P229
 
Posts: 4003 | Location: Sacramento, CA | Registered: November 21, 2008Reply With QuoteReport This Post
Raised Hands Surround Us
Three Nails To Protect Us
Picture of Black92LX
posted Hide Post
Centric are decent.

Akebono are top notch and still made in the US. Very few rotors are made in the US anymore.

I live RockAuto and keep an eye on their warehouse closeouts.
Just snagged Akebono pads for the Tundra for $33 usually $70


————————————————
The world's not perfect, but it's not that bad.
If we got each other, and that's all we have.
I will be your brother, and I'll hold your hand.
You should know I'll be there for you!
 
Posts: 26088 | Registered: September 06, 2003Reply With QuoteReport This Post
My other Sig
is a Steyr.
Picture of .38supersig
posted Hide Post
Haven't tried them, but they do have the 15" rotors that my truck needs in stock. Most don't.



 
Posts: 9728 | Location: Somewhere looking for ammo that nobody has at a place I haven't been to for a pistol I couldn't live without... | Registered: December 02, 2014Reply With QuoteReport This Post
Prepared for the Worst, Providing the Best
Picture of 92fstech
posted Hide Post
I use Rockauto for everything that isn't an absolute emergency. I'm pretty sure I've tried those brands. I've never had a problem with anything I've ordered from them, provided I ordered the right thing.
 
Posts: 10024 | Location: In the Cornfields | Registered: May 25, 2006Reply With QuoteReport This Post
Just for the
hell of it
Picture of comet24
posted Hide Post
Rockauto is good to go.

The pads and rotors themselves will matter. Rockauto has a huge inventory, from cheaper to better to excellent parts.


_____________________________________

Because in the end, you won’t remember the time you spent working in the office or mowing your lawn. Climb that goddamn mountain. Jack Kerouac
 
Posts: 16540 | Registered: March 27, 2004Reply With QuoteReport This Post
Honor and Integrity
posted Hide Post
I use Rockauto for all parts, but I also check my local NAPA store. Last time I did brakes my NAPA store was cheaper for the same parts, and they had them in stock.
 
Posts: 2270 | Location: Fitchburg, WI | Registered: March 24, 2009Reply With QuoteReport This Post
Prepared for the Worst, Providing the Best
Picture of 92fstech
posted Hide Post
The best thing about Rockauto is that for most things they carry OEM parts, so you can get the real deal without getting raped by the dealer on markup, or rolling the dice on some remanned parts store brand. They have a huge selection, so you have to know what you're looking for and not just buy the cheapest thing on the list.
 
Posts: 10024 | Location: In the Cornfields | Registered: May 25, 2006Reply With QuoteReport This Post
delicately calloused
Picture of darthfuster
posted Hide Post
Used Rockauto for years. Recently though, I bought a bad water pump from them. Leaked water immediately. Cost me over 700.00 to have it replace again because I couldn’t get to it and finish moving in time. Rockauto offer no compensation. It was a premium level part that I bought from them.



You’re a lying dog-faced pony soldier
 
Posts: 30324 | Location: Norris Lake, TN | Registered: May 07, 2008Reply With QuoteReport This Post
Member
Picture of Rick Lee
posted Hide Post
They had a wrong part listed for Mrs. Lee's MB GLA250. But then every other parts supplier showed the same part and it absolutely was the wrong part. I ended up pulling the OEM air filter off the car and just ordering one with the same part number and that worked. Not sure if they've corrected that was the part was not even close to fitting.
 
Posts: 4005 | Location: Cave Creek, AZ | Registered: October 24, 2005Reply With QuoteReport This Post
Savor the limelight
posted Hide Post
quote:
Originally posted by darthfuster:
Used Rockauto for years. Recently though, I bought a bad water pump from them. Leaked water immediately. Cost me over 700.00 to have it replace again because I couldn’t get to it and finish moving in time. Rockauto offer no compensation. It was a premium level part that I bought from them.

What did the manufacturer of the part do?
 
Posts: 12506 | Location: SWFL | Registered: October 10, 2007Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Any one had good luck with rotor/pad kits from Rockauto?

© SIGforum 2025