Is there another site for posting video to Sig forum?

Where is the video from?

quote:

Imagine kitty

you tube

You don’t need anything to post a YT video on here. Right click directly on the video to copy the actual video address and post it on here between the FLASH_VIDEO /FLASH_VIDEO, bookended each with the square brackets [].

Instructions for embedding YouTube Videos in a post:

From the YouTube page:

Click 'Share' (link on the right --> across from the channel name), then...
Click the 'Embed' button (in the share dialog box), then...
Click 'Copy' (bottom right in the embed dialog box) to get /copy the iFrame embed code, and then head back over to SIGforum...

In the Post a Reply dialog box:

Click on the Embed Video Button (looks like a two vertical frames of film, 2nd from the right), which will add the tags to your reply, then...
Paste the iFrame embed code 'in between' the tags...Pro Tip: I always change the width to "720" (vs "560") and the height to "405" (vs "315"), which is a better display size for the forum IMO.

OR, you could do what 'Q' posted above...You learn something new EVERY Day!

ok thanks to you both

FLASH_VIDEO{https://www.youtube.com/watch?v=S1980WfKC0o&list=RDS1980WfKC0o&start /FLASH_VIDEO}

Here ya go...

quote:

Originally posted by ZSMICHAEL:
FLASH_VIDEO{https://www.youtube.com/watch?v=S1980WfKC0o&list=RDS1980WfKC0o&start /FLASH_VIDEO}

You're missing the brackets on the flash video tags, and probably dont need the ones around the url

Like this, I think, without the spaces
[ FLASH_VIDEO ]https://www.youtube.com/watch?v=S1980WfKC0o&list=RDS1980WfKC0o&start[ /FLASH_VIDEO ]

Just quote pace40’s post, but don’t click the “Post Now” icon. You’ll see exactly what you did wrong.

Fixed.

^^^^^^^^^^^^^^^^^
Thanks Mark!

As posted, you don't need anything special to post a UToob video.

Open Video in utoob
Click Share
Click Embed
Click Copy

Go to SF
Open Reply window
Click the Film Icon
It will put the following in the post without the extra spaces inside the [ ]

[ FLASH_VIDEO] [ /FLASH_VIDEO]

Click between the inserted bracket commands for FLASH_VIDEO and paste what you copied from UToob, example of copied information between the commands:

[ FLASH_VIDEO]<iframe width="560" height="315" src="https://www.youtube.com/embed/2az3p0jONb4?si=je3pcM277C2MO3_C" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>[/FLASH_VIDEO ]


And Bobs your uncle: