Page 1 2
Go | New | Find | Notify | Tools | Reply | |
| Just because something is legal to do doesn't mean it is the smart thing to do. |
I would definitely not use one a lot but am thinking of a few good uses for one. I (foolishly) ordered a cheap one off Amazon and regret it. The instructions on using it are confusing. Thought I had it figured out for 12 Inch pounds. Screw got tight enough I was afraid of breaking it and the tool was not "breaking free". So what next? Is the Wheeler an acceptable tool for low usage? While I am willing to spend a bit more then I did but some of the prices I see are just more then I think are needed. Integrity is doing the right thing, even when nobody is looking. | ||
|
Member |
I’m sure the Wheeler tool would be sufficient. Personally I have 2 SnapOn and 1 Matco digital torque wrenches in different drive sizes and torque ranges that I use. It’s most certainly overkill but I use 2 of them for car stuff often enough to want a high quality torque wrench, and then I decided to add the 1/4” drive SnapOn precision unit primarily for gun stuff which has actually occasionally come in handy on car stuff too. I just use the appropriate socket bit with one of my torque wrenches. “It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat.” | |||
|
| Peace through superior firepower  |
The Wheeler Fat Wrench will do what you need. It's made in the USA (no instruction manuals written by someone whose first language is Mandarin) and the company has quite good customer service. The manual model is fine, no "digital" anything required. https://www.amazon.com/Wheeler...h/dp/B0012AXR4S?th=1 Just remember to return the tool to its zero setting so that you do not fatigue the spring while the tool is stored. Per Wheeler, failing to do this may result in inaccurate torque values. | |||
|
quarter MOA visionary |
If you can afford it CDI is an excellent one. I use mine all the time. I also have a couple CDI torque wrenches as well. | |||
|
Drill Here, Drill Now |
I have a Wheeler and it works fine for swapping out rifle stocks and installing scopes. No matter which torque screwdriver you choose I do warn you that it gets expensive if you torque your action to your new stock, forget to lower the torque for the scope rings, torque the scope rings, snap off scope ring bolt, the EZ Out doesn't work to remove the broke bolt, and you have to take it to a gunsmith. Ego is the anesthesia that deadens the pain of stupidity DISCLAIMER: These are the author's own personal views and do not represent the views of the author's employer. | |||
|
Member |
I use Fix It Stix all-in-one adapter and I'm very happy with it.  I also own a similar adapter from Topeak but in Nm. They don't click, just turn lines to a chosen value and you're done. They're really small, easy to pack and work straight with screwdriver or 90deg. with a ratchet. _ _ _ _ _ _ _ _ _ _ _ Owning a handgun doesn't make you armed any more than owning a guitar makes you a musician. | |||
|
Chilihead and Barbeque Aficionado |
I use the Wheeler Fat Wrench and it has served me well. _________________________ 2nd Amendment Defender The Second Amendment is not about hunting or sport shooting. | |||
|
| Member |
Dang, I wished this thread would have come up before I did our KC house repair  I spent $ on a Klein torque screw driver for breaker box work. Learned my lesson, always ask SigForum first. | |||
|
| It's all part of the adventure... |
Another vote for the Wheeler F.A.T. wrench! Regards From Sunny Tucson, SigFan NRA Life - IDPA - USCCA - GOA - JPFO - ACLDN - SAF - AZCDL - ASA "Faith isn't believing that God can; it's knowing that He will." (From a sign on a church in Nicholasville, Kentucky) | |||
|
Member |
Watch this YT channel comparing using digital scale system to verify values. iirc the FAT wrench was one of or the best overall. I've had a FAT wrench for years with no issues, easy to use. I believe there are 2-3 vids with various brands. https://youtu.be/YPP5Y1o0lU0?si=ZOJZo4Gk9Yr_PHm0 " like i said,....i didn't build it, i didn't buy it, and i didn't break it." | |||
|
| Member |
I’ll echo everything Para posted regarding the Wheeler FAT wrench, especially the part about returning it to zero when done. I bought one a couple of years ago and I’ve been happy with it. As to their customer service, I recently installed a red dot on a MOS Glock. The screw, being too long, bottomed out and I didn’t realize it at the time. I twisted the Torx bit. I contacted Wheeler about purchasing another. They sent me three for free. | |||
|
| Cogito Ergo Sum |
To echo others, the Wheeler Fat Wrench will work . | |||
|
Member |
I bought a Wiha back when they were affordable but at current Wiha prices would just get a Wheeler. Harshest Dream, Reality | |||
|
| Member |
this is what i have. no prblems | |||
|
goodheart |
I have one Wheeler Fat Wrench that works OK. Then I ordered a second one, and it did not work right at all. Now I have a Vortex, and would never go back--much better build quality, more precise. _________________________ “Remember, remember the fifth of November!" | |||
|
Member |
Every Wheeler tool I've ever examined is made in China including their FAT Wrench. Every American-made torque screwdriver I've seen ran around $200+, although you can get them for much less used. The FAT Wrench is fine, but its gauge is marked off in 5 in-lb increments. If say you want to set to 12 in-lb, you have to eye it out between 10 & 15. I prefer other models that allow you to set your torque value to the round number you want. You can get a Husky digital torque screwdriver at HD for $70. https://www.homedepot.com/p/Hu...er-H4DETSD/320878881 | |||
|
| If you see me running try to keep up |
| |||
|
Member |
I used the Wheeler FAT for several years, then switched to the Vortex Optics Torque Wrench last year. The Vortex is a major upgrade and the Wheeler sits unused. “Leave the Artillerymen alone, they are an obstinate lot. . .” – Napoleon Bonaparte http://poundsstudio.com/ | |||
|
| Stupid Allergy  |
These are awesome.. kinda spendy but very handy.
"Attack life, it's going to kill you anyway." Steve McQueen... | |||
|
| Left-Handed, NOT Left-Winged! |
Proto Professional torque limiting screwdriver here. 6 to 36 in-lbs in 1 in-lb increments. Bought it from Grainger. | |||
|
| Powered by Social Strata | Page 1 2 |
 | Please Wait. Your request is being processed... |
|
© SIGforum 2024