Check data plates inside of door frame for recomended weight limits... instead of bumper pull what about receiver plug in hitch style that is height adjustable...will give a smoother pull with less pulsating pull and bounce of a true bumper pull....... drill sgt.
Posts: 2205 | Location: denham springs , la | Registered: October 19, 2019
The term "bumper pull" in these days means a travel trailer or non fifth wheel. As said above the capacity plates will tell you how much capacity you can pull. Keep in mind that the trailer specs are dry weights, Add gear, water @ 8.5 lbs. per gallon on to the weight of the trailer. The truck weight also does not contain fluids or passengers. It's not just about what you can pull it's also about what you can get stopped.
Awake not woke
Posts: 618 | Location: Citrus Springs, Fl. | Registered: January 02, 2013
I assume by gen 2 you're referring to the engine. Of course that's not what determines towing capacity. A little google fu and I come up with 13400 to 14150 lbs. I presumed model year 2001. I agree with bigwagon, check the door jamb, it'll tell you what it is for that specific truck. Looks like you'll be okay. Be sure to install appropriate hitch, trailer wiring including brakes which will need a brake controller.
Are you asking legally or capability? One time thing or on a regular basis? Quick trip across town or a long drive? The transmission in that truck would factor into my answer based on how you would answer these questions.
Posts: 581 | Location: Texas | Registered: October 22, 2008
I tow a Yanmar 100 quite regularly with an f450 with a gooseneck trailer, I know it’s probably bigger piece of equipment than you are talking, it’s has powerstroke in it, it escapes me which one but I’d really be hesitant to bumper tow anything in that size range equipment wise. It’s all that 450 can handle, it’s not like towing a camper, you have an object chained down to a trailer, any number of mulligans can and do happen. Check your sticker on the door post, I’d have to believe that it will be overweight on bumper pull, if it was a short distance I’d do it no problem , long distance I’d be Leary
I just looked up the weight on the Yanmar, it’s substantially heavier than your 8 thousand pound machine, more like one of our Yanmar 50s or Tackhuchi 35s we have..
Originally posted by bigwagon: The GVWR and GCWWR should be on a sticker in the door jamb.
Do NOT forget that the GVWR and GCWR includes the weight of your Truck (the tow vehicle), as well as any passengers, cargo, fuel, tongue weight of the trailer, etc! So for GCWR that's the total combined weight of the Trailer (12,000 lbs) PLUS your Truck!
If Some is Good, and More is Better.....then Too Much, is Just Enough !! Trump 47....Make America Great Again! "May Almighty God bless the United States of America" - parabellum 7/26/20 Live Free or Die!
Posts: 9808 | Location: New Hampshire | Registered: October 29, 2011
Thanks guys, Yes I hear you on the published ratings. I knew this was going to be pushing it. Was looking for "real life" experience based on the rig. Yes it is 4wd with auto trans.
12000 pounds with a 10-15% tongue weight would require a capable hitch. Unless you have a Class V hitch, the load on the hitch would exceed its rating.
------- Trying to simplify my life...
Posts: 5349 | Location: Commonwealth of Virginia | Registered: January 15, 2007
I had a 98 12v for years that was very capable of pulling heavy. The weakest link is the Automatic transmission,specially if the motor is tuned up. The brakes are the other side of that getting it to slow down safely. An exhaust brake would be very helpful..
Sig 556 Sig M400 P226 Tacops P229 Legion P320 X compact
Posts: 470 | Location: Oklahoma | Registered: January 11, 2009