An orthorhombic (brick-shaped) 9V battery with one male and one female terminal. Decades ago about the only use for them was transistor radios, so I’ve always called them “transistor radio” batteries. But most folks nowadays would be puzzled by that term. What’s the proper name?
Serious about crackers
Posts: 9868 | Location: San Diego | Registered: July 26, 2014
Calling them a 'stacker' or 'sixer' doesn't go far.
Should do fine just calling it a nine volt or PP3.
Posts: 9667 | Location: Somewhere looking for ammo that nobody has at a place I haven't been to for a pistol I couldn't live without... | Registered: December 02, 2014
___________________________ All it takes...is all you got. ____________________________ For those who have fought for it, Freedom has a flavor the protected will never know
ΜΟΛΩΝ ΛΑΒΕ
Posts: 12491 | Location: Belly of the Beast | Registered: January 02, 2009
Both Duracell and Energizer just label them as "9V." The fine print on the rear of the Duracell has a long identifier, but I suspect that's just for formal, internal use.
► 6.4/93.6
“It is peace for our time.” — Neville the Appeaser
Posts: 48119 | Location: 10,150 Feet Above Sea Level in Colorado | Registered: April 04, 2002
“The alkaline variant of the 9V battery is also referred to as 6LR61 and 006P. Other industry names for the 9V battery can be Duracell MN1604, Rayovac A1604, Energizer 522, Varta 4922, MX2400, 1604A, Radio Battery, Smoke Alarm Battery, 9V Block, and Krona.”
Yeah, I’ll stick with “9 volt”.
Serious about crackers
Posts: 9868 | Location: San Diego | Registered: July 26, 2014
I was trying to help identify some ancient and obsolete electronic junk for an Estate Sale and couldn’t figure out the needed battery size. I learned from a search that PP “Power Pack” was actually a series of different sizes, thus PP1 and PP3 and up was a series of sizes going up from there.
As a young man my best friends Dad was a WW2 Vet Electronics and Radio guy. He always called them Transistor Batteries. He would “test” these by sticking the contacts on his tongue. He finally convinced me to try that, I hated it! I quickly learned to use a Volt Meter to check the batteries. Clyde Smith was his name and he introduced me to Ham Radio. .
Posts: 12094 | Location: Near Hooker Oklahoma, closer to Slapout Oklahoma | Registered: October 26, 2009
I've been using the Lithium 9Vs lately. They are more expensive, but in return they last longer, and you can leave one in your device for a long time of no use, and they will not leak that white crap from the terminals like alkalines will. I also have gone to the Lithium AA and AAA cells for the same reasons, where I don't run rechargeables. The AAs and AAAs and not proportionately more expensive. Energizer, for one, makes all those sizes in Lithium.
When in doubt, mumble
Posts: 10887 | Location: South Congress AZ | Registered: May 27, 2006
Originally posted by PASig: It’s always been a 9V to me
Have you all noticed that AA batteries seem to have taken over for most applications where in the past it would have been several D, C or a 9V?
This isnt at a bad thing. I worked at getting my personal electronics on AA's when still in USAR so that I could swap batts when low from one item with less priority to another that needed to work. The only glitch was Surfire and those C123's.
After that things moved to AAA's and that worked well as lights etc downsized and were still more powerful. That got me up to the 18650's with USB recharging being the common denominator, and a power pack to handle the phone, flashlight etc with cords. I can jump the wife's tablet if needed and her car has ports, too. I keep a recharger plug in the truck, we aren't without options and a common backup power source. Hard no on button cells. Cheaper to toss that junk in a thrift store bin and by new at the replacement cost of the cells alone. Learned that lesson long ago, try finding a "N" cell for a first gen Aimpoint.
Now its either got a USB rechargeable cell - which can last hundreds of times longer - or it's not an option. The LED weapon sights are all 2032 IIRC. Same idea - make it a spec and it won't be an issue unlike all the speciality junk Chinesium.
About the only 9v in the house now is smoke detectors or an old Radio Shack needle display voltmeter - because digital ones aren't all that. And I stuck with the Ryobi 18V batts for the tools - they sit 28 days a month, Im not "investing" double just to brag over the name. Control your battery footprint and it's all good.
Yep 9 volt. Have one in my safe combo lock. I change it once a year although they always test good once removed.
Men fight for liberty and win it with hard knocks. Their children, brought up easy, let it slip away again, poor fools. And their grandchildren are once more slaves.
-D.H. Lawrence
Posts: 11524 | Location: Fort Worth, Texas | Registered: February 07, 2007