SIGforum
Home coffee roasters, please step in...

This topic can be found at:
https://sigforum.com/eve/forums/a/tpc/f/320601935/m/5280088734

February 17, 2018, 03:28 PM
ShouldBFishin
Home coffee roasters, please step in...
I've roasted coffee beans in the past on my gas grill in a cast iron skillet with pretty decent results, but not a very consistent roast. I thought I'd step it up a bit and use a nut roasting basket with a rotisserie.


My first experiment at 470F I heard what I believe was the first crack start at about 4 1/2 minutes and it seemed to go for about 2 minutes. I kept waiting to hear the second crack, but never heard it. Pulled them off at the 10 minute mark and cooled the beans off quickly (it was about 17F outside). I definitely missed the second crack, my beans are burnt...


I'm about to give it another shot, but before I do what temp do you guys typically shoot for when roasting your coffee beans?
February 17, 2018, 08:03 PM
Sig Sauer Kraut
I’m fairly new to roasting, but my bean temp doesn’t get above 400 before I start cooling. I don’t go into second crack though. Second crack is much louder than first crack in my experience, so could you have missed first crack and heard second crack?
February 19, 2018, 03:32 PM
Sig Sauer Kraut
I was thinking about this some more. It’s also possible that you’re going from FC to SC without any time in between given the details you gave.
February 19, 2018, 03:48 PM
ShouldBFishin
quote:
Originally posted by Sig Sauer Kraut:
I was thinking about this some more. It’s also possible that you’re going from FC to SC without any time in between given the details you gave.



Thanks for responding. I was wondering about that too. The later portion of that 2 minutes sounded pretty violent.


I did another test run with a lower temperature (400) and had much better results and definitely heard the second crack 2 minutes after the first crack. Second crack seemed to last about 3 minutes. The results were pretty good - a little more mellow than I was looking for, but drinkable Smile It made a pretty good crema in my espresso this afternoon.


Lots of variables to tinker with - I think this is going to take some time for me to dial in exactly what I'm looking for Big Grin
February 19, 2018, 05:45 PM
djinco
I would recommend a Behmor roaster. A dedicated roaster provides you with consistent, repeatable results. Behmor 1600 Plus will roast 4-16oz per batch. A one lb roast is a total of 18 minutes.


Cheers, Doug in Colorado

NRA Endowment Life Member