Bolt cutter recommendations?

Several years back I bought a set of 36” bolt cutters from Harbor Freight. They have other sizes and worked well for a very low cost but they aren’t something I use often.

Posts: 2359 | Location: Massillon, OH | Registered: January 22, 2006

Ignored post by birddog1 posted

Show Post

Blume9mm

Member

posted

Hide Post

quote:
Originally posted by PHPaul:
Echoing and expanding on comments above, a battery-powered 4.5 inch grinder with a good cutoff wheel is WAY more versatile and will cut damn near anything.
Easier on the arms too...

I agree, I've used a right angle grinder (Milwaukee 18volt cordless) for years to cut bolts, locks and just about anything metal and even masonry.

My Native American Name:
"Runs with Scissors"

Posts: 4441 | Location: Greenville, SC | Registered: January 30, 2017

Ignored post by Blume9mm posted

Show Post

slosig

Ammoholic

posted

Hide Post

Herman Story makes a great Bolt Cutter, but it may not be what you are looking for:

https://www.hermanstorywines.com/

Posts: 7263 | Location: Lost, but making time. | Registered: February 23, 2011

Ignored post by slosig posted

Show Post

sigfreund

Freethinker

posted

Hide Post

quote:
Originally posted by slosig:
Herman Story makes a great Bolt Cutter, but it may not be what you are looking for:

But I had to look.

► 6.4/93.6

“Most men … can seldom accept the simplest and most obvious truth if it … would oblige them to admit the falsity of conclusions … which they have woven, thread by thread, into the fabrics of their lives.”
_{— Leo Tolstoy}

Posts: 48058 | Location: 10,150 Feet Above Sea Level in Colorado | Registered: April 04, 2002

Ignored post by sigfreund posted

Show Post

Page 1 2