SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    How to get tree sap off auto paint?
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
How to get tree sap off auto paint? Login/Join 
Peace through
superior firepower
Picture of parabellum
posted
I loaded something into the bed of my truck today and happened to get a glance at the top of the cab. The truck sits under a big tree and I guess it's tree sap, or I don't know what, but it's tree something- all these little spots. They're clear, like glue, have a rough texture to them, and the stuff is on there pretty solid.

No, I haven't tried washing them off. Perhaps it's that simple, but looking at this stuff and trying to remove it with a couple of fingers. I don't know if soapy water is going to do the trick. Any suggestions?
 
Posts: 110811 | Registered: January 20, 2000Reply With QuoteReport This Post
Bookers Bourbon
and a good cigar
Picture of Johnny 3eagles
posted Hide Post
Could be aphid crap. Good wash should get most of them.





If you're goin' through hell, keep on going.
Don't slow down. If you're scared don't show it.
You might get out before the devil even knows you're there.


NRA ENDOWMENT LIFE MEMBER
 
Posts: 7527 | Location: Arkansas  | Registered: November 06, 2010Reply With QuoteReport This Post
Member
posted Hide Post
denatured alcohol is the wining strategy.


“So in war, the way is to avoid what is strong, and strike at what is weak.”
 
Posts: 11341 | Registered: October 14, 2004Reply With QuoteReport This Post
blame canada
Picture of AKSuperDually
posted Hide Post
I have used chemical guy products with great success. I was looking for the exact stuff I've used when I came across this video they produced on this exact subject:



I have used a clay bar process with a light buffing compound and non-agressive polish pad on a compound buffer.

Unlike what they did in the video, I really like to use a foam cannon with a mud-busting foam or the cantelope foam first.


~~~~~~~~~~~~~~~~~~~~~~~~~
"The trouble with our Liberal friends...is not that they're ignorant, it's just that they know so much that isn't so." Ronald Reagan, 1964
~~~~~~~~~~~~~~~~~~~~~~~~~~
"Arguing with some people is like playing chess with a pigeon. It doesn't matter how good I am at chess, the pigeon will just take a shit on the board, strut around knocking over all the pieces and act like it won.. and in some cases it will insult you at the same time." DevlDogs55, 2014 Big Grin
~~~~~~~~~~~~~~~~~~~~~~~~~~

www.rikrlandvs.com
 
Posts: 14025 | Location: On the mouth of the great Kenai River | Registered: June 24, 2007Reply With QuoteReport This Post
A Grateful American
Picture of sigmonkey
posted Hide Post
WD-40.

Spray and let is set for a few minutes, and use a microfiber cloth to work on the sap keeping it wet with WD-40. Then use another microfiber and more WD-40 and go over the area when all the sap is removed to get any residual sap.

After you are done, just wash the area with car wash soap.




"the meaning of life, is to give life meaning" Ani Yehudi אני יהודי Le'olam lo shuv לעולם לא שוב!
 
Posts: 44952 | Location: Box 1663 Santa Fe, New Mexico | Registered: December 20, 2008Reply With QuoteReport This Post
Member
Picture of 808
posted Hide Post
I’ve also had luck with WD 40 and Goo Gone .

Easy to find about anywhere.


_______________
NRA Life Member
 
Posts: 1255 | Location: Great Commonwealth of Pennsylvania | Registered: February 04, 2001Reply With QuoteReport This Post
Green grass and
high tides
Picture of old rugged cross
posted Hide Post
Be careful with things like wd-40. might remove more than whatever is on there. Goof off is another product. But read before using to insure it won't damage the clear coated



"Practice like you want to play in the game"
 
Posts: 20134 | Registered: September 21, 2005Reply With QuoteReport This Post
Drill Here, Drill Now
Picture of tatortodd
posted Hide Post
Advance Auto and other auto parts stores sell Stoner Tarminator Tar and Sap Remover

If necessary, follow up with clay bar w/ lubricating fluid (eg soapy water)



Ego is the anesthesia that deadens the pain of stupidity

DISCLAIMER: These are the author's own personal views and do not represent the views of the author's employer.
 
Posts: 24202 | Location: Northern Suburbs of Houston | Registered: November 14, 2005Reply With QuoteReport This Post
Member
posted Hide Post
I second Tator's clay bar recommendations. Might as well do the whole roof and remove all contaminants if you're going to do more than one or two small spots, then re-wax after.

This message has been edited. Last edited by: marksman41,




 
Posts: 5104 | Location: Arkansas | Registered: September 04, 2008Reply With QuoteReport This Post
Just for the
hell of it
Picture of comet24
posted Hide Post
I've had the same problem a few times and have found alcohol the best thing that works. That and a microfiber towel. Best to do it with a clean car so you don't add any scratches rubbing anything on the paint.

I then use a spray-on wax where I used the alcohol.

I've tried a few other ways and alcohol has been the best.

Also, hand sanitizer with alcohol works and stays in one spot better to really soak into the sap as long as it's not on the side of the car.


_____________________________________

Because in the end, you won’t remember the time you spent working in the office or mowing your lawn. Climb that goddamn mountain. Jack Kerouac
 
Posts: 16524 | Registered: March 27, 2004Reply With QuoteReport This Post
A Grateful American
Picture of sigmonkey
posted Hide Post
quote:
Originally posted by old rugged cross:
Be careful with things like wd-40. might remove more than whatever is on there. Goof off is another product. But read before using to insure it won't damage the clear coated


WD-40 will not damage paint or clear coat unless the paint is in bad shape and already compromised.

Goof-Off on the other hand is largely acetone and will damage paint very quickly.




"the meaning of life, is to give life meaning" Ani Yehudi אני יהודי Le'olam lo shuv לעולם לא שוב!
 
Posts: 44952 | Location: Box 1663 Santa Fe, New Mexico | Registered: December 20, 2008Reply With QuoteReport This Post
Member
posted Hide Post
elbow grease para. Na just kiddin. Deisel
 
Posts: 1596 | Location: TEXAS | Registered: August 17, 2014Reply With QuoteReport This Post
Member
posted Hide Post
WD-40 is banana oil, a lubrication rep explained to me. Hard to imagine that banana oil would damage paint.


-c1steve
 
Posts: 4174 | Location: West coast | Registered: March 31, 2012Reply With QuoteReport This Post
Member
posted Hide Post
Bug and tar remover (auto parts store should have it) and a microfiber cloth to start. That should do it, but if you have to get more aggressive then Goo gone (not Goof Off), WD-40, and rubbing alcohol, in that order.
 
Posts: 1021 | Location: Tampa | Registered: July 27, 2010Reply With QuoteReport This Post
Member
posted Hide Post
80 Grit on an 8” Mud Hog…couldn’t resist! Smile



NAPA sells Kleaneasy #6384 Qt. Made for car cleaning. Will not damage clear or color.
 
Posts: 5775 | Location: west 'by god' virginia | Registered: May 30, 2009Reply With QuoteReport This Post
Member
posted Hide Post
Just got it off our car today with rubbing alcohol, worked great. I tried WD and it did not work. The alcohol took it off immediately.
 
Posts: 887 | Location: Louisiana and Florida | Registered: February 22, 2010Reply With QuoteReport This Post
Down the Rabbit Hole
Picture of Jupiter
posted Hide Post
WD-40 works like a dream. Even the label suggests using it to remove road tar.


Diligentia, Vis, Celeritas

"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."
-- George Orwell

 
Posts: 5039 | Location: North Mississippi | Registered: August 09, 2002Reply With QuoteReport This Post
Down the Rabbit Hole
Picture of Jupiter
posted Hide Post
quote:
Originally posted by recoatlift:
80 Grit on an 8” Mud Hog…couldn’t resist! Smile


Steel wool or a good Brillo pad should do the trick. Big Grin


Diligentia, Vis, Celeritas

"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."
-- George Orwell

 
Posts: 5039 | Location: North Mississippi | Registered: August 09, 2002Reply With QuoteReport This Post
Alea iacta est
Picture of Beancooker
posted Hide Post
I have always used rubbing alcohol. If the sap is dried and crystallized, that’s a little different. First try with alcohol. A lot of the time it’ll come off.
Zymol makes a product called HD Cleanse that works well clean up the paint nicely after you remove the sap.



quote:
Originally posted by sigmonkey:
I'd fly to Turks and Caicos with live ammo falling out of my pockets before getting within spitting distance of NJ with a firearm.
 
Posts: 4579 | Location: Staring down at you with disdain, from the spooky mountaintop castle.  | Registered: November 20, 2010Reply With QuoteReport This Post
Member
Picture of RB211
posted Hide Post
For the fine sap mist we have going on right now, just a good wash will get rid of it. When my pine trees really decide to shit on the cars, I hit it with Griots tar & sap remover, wash, and chase it with their spray wax.
 
Posts: 2091 | Location: Atlanta, GA | Registered: February 24, 2010Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    How to get tree sap off auto paint?

© SIGforum 2025