SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Glue/Adhesive Recommendation - Fabric to Glass
Go
New
Find
Notify
Tools
Reply
  
Glue/Adhesive Recommendation - Fabric to Glass Login/Join 
Member
Picture of P250UA5
posted
Convertible top window, small separation from the top resulting in a leak when it rains.

Need a good waterproof adhesive to try to re-bond the glass to the fabric top.

Owner would prefer to avoid the near $2k for a new top, plus the time to install DIY.
Currently have the trunk area disassembled & plug removed so it doesn't hold water.




The Enemy's gate is down.
 
Posts: 16344 | Location: Spring, TX | Registered: July 11, 2011Reply With QuoteReport This Post
Member
posted Hide Post
If the adhesive will be hidden by the fabric, how about 3M 5200?
 
Posts: 9114 | Location: The Red part of Minnesota | Registered: October 06, 2002Reply With QuoteReport This Post
Member
Picture of P250UA5
posted Hide Post
That might be a good option to try.




The Enemy's gate is down.
 
Posts: 16344 | Location: Spring, TX | Registered: July 11, 2011Reply With QuoteReport This Post
Member
posted Hide Post
5200 is a fantastic adhesive but it is most definitely permanent. If the area is truly small I would squeeze some 5200 on a piece of cardboard and use something small and disposable to apply it very carefully. Once it’s on something, it on it for good.
 
Posts: 1017 | Location: Tampa | Registered: July 27, 2010Reply With QuoteReport This Post
Member
Picture of P250UA5
posted Hide Post
Good to know, will pass that along




The Enemy's gate is down.
 
Posts: 16344 | Location: Spring, TX | Registered: July 11, 2011Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Glue/Adhesive Recommendation - Fabric to Glass

© SIGforum 2024