SIGforum
SIG SAUER MPX (Update: Exclusive Non-NFA version P7)

This topic can be found at:
https://sigforum.com/eve/forums/a/tpc/f/320601935/m/4610068653

August 11, 2017, 09:40 AM
PossibleZombie
SIG SAUER MPX (Update: Exclusive Non-NFA version P7)
quote:
Originally posted by dwd1985:
quote:
Originally posted by creslin:


I never tried the factory irons with it - I pulled those things off forever ago. I don't like how big and bulky they are.


Sent you an email


I did the same thing with my factory irons, they aren't for me. Since it is just a range toy for me I'm fine with just having a red dot on it.
August 11, 2017, 11:07 AM
PorterN
quote:
Originally posted by creslin:
quote:
Originally posted by gino d:
Who makes the carbon fiber hand guard on your set-up?


If I had to guess...

https://lancer-systems.com/awc...duct/mpx-handguards/


Yep, lancer.



____________________________
While you may be able to get away with bottom shelf whiskey, stay the hell away from bottom shelf tequila. - FishOn
August 17, 2017, 09:48 PM
10x Sniper
Can anyone confirm that the Barcelona Spain police on scene and on tv today- if they were carrying MPx's?


________________________
"The Revolver -A more elegant weapon from a more civilized age."
August 20, 2017, 11:32 AM
Faust245
After almost a year, I finally received my stamp for my Innovative Arms ported "integral suppressor". Also installed a BFS III as well. Pretty fun time at the range.






September 18, 2017, 09:39 PM
walker77
quote:
Originally posted by ACClauhs:
I remember a few people complaining of excessive wear inside the receiver, cam pin scratching/gouging. Mine had this issue and went back to the factory on Thursday. Anyone have a positive result of sending theirs?


Mine has a gouge just like yours. I hate to send it back to the factory since its a sbr.

How long was turn around time on yours?
September 22, 2017, 12:15 PM
ACClauhs
quote:
Originally posted by walker77:
quote:
Originally posted by ACClauhs:
I remember a few people complaining of excessive wear inside the receiver, cam pin scratching/gouging. Mine had this issue and went back to the factory on Thursday. Anyone have a positive result of sending theirs?


Mine has a gouge just like yours. I hate to send it back to the factory since its a sbr.

How long was turn around time on yours?


About 2 weeks, give or take. Mine is an SBR too. SIG customer service told me to remove the stock and all accessories prior to shipping it back. They paid shipping both ways and it runs just fine now.
September 28, 2017, 05:41 AM
corey4
Was the gun not running correctly, or is the issue just cosmetic? What did they to fix it?
September 28, 2017, 01:40 PM
ACClauhs
The gun ran fine, only issues were ammo related. I was concerned that the amount of wear it showed at 1000 rounds would just keep getting worse. And since they offered to fix it under warranty without any out of pocket with shipping, I figured I could do without it for a couple weeks.
September 29, 2017, 04:46 PM
corey4
what did they do? it's not like they can just give you a new lower cuz of the sbr paperwork.
September 29, 2017, 06:58 PM
corey4
I feel like a total idiot...

I just assumed it was the lower for whatever reason.
January 20, 2018, 03:17 PM
ftttu
I've never seen an MPX in a movie or TV show until an episode of Bosch. Other than this being one of my favorite all-time cop shows, it was neato to see an MPX being used. I think it was even referred to by name in the episode other than just being used or brandished.


Retired Texas Lawman, now active reserve
January 21, 2018, 11:04 AM
madmatt
Saw the MPX in Logan and Bright. IMFDB also listed the MPX in Baby Driver.


Semper Fi
Madmatt

SIGs, BHPs, CZ PCRs, HKs, 1911s, S&W 625-3 45 ACP, HK/Benelli M1S90, Colts 6721/LE6920, Steyr SBSs, Emerson and ZT Knives, Rubicons, Harleys & APBTs
January 21, 2018, 11:44 AM
PorterN
The MPX is also in a couple video games now.



____________________________
While you may be able to get away with bottom shelf whiskey, stay the hell away from bottom shelf tequila. - FishOn
February 15, 2018, 01:25 PM
Citadel
Butt stock question here. Have a MPX SBR on layaway with the Collapsible stock. I am debating on the folder just for deployment purposes. Any thoughts rel: this. Looking for someone who has already taken that step. Thanks in advance.
February 15, 2018, 01:29 PM
PorterN
Buy the folder and try em both. Depending on your intended use, carry method, and your personal size and how you like to shoot, youll favor one over the other.

Im sticking with folder.



____________________________
While you may be able to get away with bottom shelf whiskey, stay the hell away from bottom shelf tequila. - FishOn
February 25, 2018, 12:36 PM
Patriot_1776
Any love for MRO's? If so, which mount did you like?

I did notice the Scalarworks from pg.130 - just curious of other's experiences.



NRA Life Member
March 03, 2018, 06:43 AM
06wrb
Excuse my ignorance on this. I just swapped to the ILWT 4.5 inch barrel and his website said to be sure to check headspace after swap. Where is the best place for headspace gauges? I saw a set at Brownells for $60.

Barrel slid right in like butter. Should be perfect with the omega 9k.
March 17, 2018, 02:16 PM
1s1k
Did anyone buy the Next Level Armament spring block and charging handle so you don’t scratch the top of the receiver like the factory parts will?

The spring block works perfectly with the factory charging handle. If you use the supplied charging handle from Next Level Armament you will scratch the top of the receiver in a different place because their charging handle is much thicker than the factory supplied handle.

First time I have been disappointed with any of their stuff. The spring block works perfectly but skip the charging handle since it totally defeats the purpose of what their spring block is designed for.
March 18, 2018, 11:42 AM
Rangerone
I tried the NLA block and CH and when I shoot supressed, the gas blowback leaked thru the back of the CH, not enough “seal”. Not that it was supposed to. I saw the Giesele CH and bought that. It does not need the NLA lift block (not compatible with it) and it blocked more of the “suppressed” blow back gas and the CH feels better. My recommendation is the Giesele CH for better feel and blocking of the gas.
March 18, 2018, 12:12 PM
aparoche
quote:
Originally posted by Patriot_1776:
Any love for MRO's? If so, which mount did you like?

I did notice the Scalarworks from pg.130 - just curious of other's experiences.


Expensive but the best for a MRO. Quick detach feature and also allows for co-witness with BUIS...

https://www.americandefenseman...m/view/product/1055/