All hail the allknowing SigForum!

Guys, I’ve been trying to find a baffle tool for removing the baffle stack from a suppressor. Well AAC doesn’t make them anymore and of course I need one to press out the baffle stack I have because I waited too long before removing mine.

I am wondering how hard would it be for someone to make me the part that threads into the suppressor (circled in red) and I could cobble the rest of the tool using threaded rod I could buy from a big box store....?



The exterior threads on the circled part is standard 1/2” x 28 which is typical for 22 suppressors.

The tool is an AAC Element baffle removal

Link to a better pic of the tool.
https://www.midwayusa.com/product/1006920619

quote:

AAC Element baffle removal tool.

Silencer Central sells a similar tool

Link

I'm not a machinist, but take a look at the SS 18-8 stuff halfway down this page, and get some rod for the backside and a pair of nuts crimped together?

https://www.mcmaster.com/threa...hex-thread-adapters/

quote:

Originally posted by stoic-one:
I'm not a machinist, but take a look at the SS 18-8 stuff halfway down this page, and get some rod for the backside and a pair of nuts crimped together?

https://www.mcmaster.com/threa...hex-thread-adapters/

Yeah, gun threads are different than other stuff on the planet....those gunsmiths must have a very strong guild for them to settle on obscure thread patterns. Only guns use 1/2 x 28

Thanks HRK!!!!

Just ordered one.

Four minutes for a fix! Sigforum rocks!

[thumbs up]