SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Question About Cable
Go
New
Find
Notify
Tools
Reply
  
Question About Cable Login/Join 
The Unmanned Writer
Picture of LS1 GTO
posted
Let's say for a moment I choose to get cable but I want to be able to view channels in locations which do not have the wiring.

Are there [economical] options out there for transmitting (like a private WiFi) to locations in my house to watch any content which is in the signal's range or, would i need to add coax?






Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.



"If dogs don't go to Heaven, I want to go where they go" Will Rogers

The definition of the words we used, carry a meaning of their own...



 
Posts: 14296 | Location: It was Lat: 33.xxxx Lon: 44.xxxx now it's CA :( | Registered: March 22, 2008Reply With QuoteReport This Post
always with a hat or sunscreen
Picture of bald1
posted Hide Post
Used to use a Link WaveCom Sr 2.4GHz Wireless RF AV relay to share the cable feeds from a lower level to an upstairs bedroom. Worked pretty good. Don't know if they're still around.



Certifiable member of the gun toting, septuagenarian, bucket list workin', crazed retiree, bald is beautiful club!
USN (RET), COTEP #192
 
Posts: 16631 | Location: Black Hills of South Dakota | Registered: June 20, 2010Reply With QuoteReport This Post
Optimistic Cynic
Picture of architect
posted Hide Post
It depends. How is your cable box connected to your TV? If via an HDMI cable, an HDMI wireless "extender" is probably your most economical opyion, this takes the HDMI signal from the back of your cable box, and broadcasts it to a receiver connected to a TV/monitor somewhere else. This takes care of video and audio, but if you want to be able to change channels remotely, you are out of luck. There are IR and RF extenders for remotes as well, but far less standardized.
 
Posts: 7008 | Location: NoVA | Registered: July 22, 2009Reply With QuoteReport This Post
Member
Picture of 98XJRC
posted Hide Post
Depending on the provider some offer wireless receiver options. Both big satellite companies have the availability, however I’m unsure if any cable company has that available. Most providers will run the cable to any room you want service though free of charge.
 
Posts: 784 | Location: PA  | Registered: December 05, 2010Reply With QuoteReport This Post
The Unmanned Writer
Picture of LS1 GTO
posted Hide Post
quote:
Originally posted by architect:
It depends. How is your cable box connected to your TV? If via an HDMI cable, an HDMI wireless "extender" is probably your most economical opyion, this takes the HDMI signal from the back of your cable box, and broadcasts it to a receiver connected to a TV/monitor somewhere else. This takes care of video and audio, but if you want to be able to change channels remotely, you are out of luck. There are IR and RF extenders for remotes as well, but far less standardized.


No cable box (yet?). When I had cable six or seven years ago, did not need a box. Had a t-fitting where one end went to the tv and the other to a cable modem. Previous owner(s?) had extensions routed under carpet and outside the house - none did it the "right" way - and cables were connected into the tv. Since getting rid of cable, the old carpet has been removed and holes patched.






Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.



"If dogs don't go to Heaven, I want to go where they go" Will Rogers

The definition of the words we used, carry a meaning of their own...



 
Posts: 14296 | Location: It was Lat: 33.xxxx Lon: 44.xxxx now it's CA :( | Registered: March 22, 2008Reply With QuoteReport This Post
Raised Hands Surround Us
Three Nails To Protect Us
Picture of Black92LX
posted Hide Post
quote:
Originally posted by LS1 GTO:
quote:
Originally posted by architect:
It depends. How is your cable box connected to your TV? If via an HDMI cable, an HDMI wireless "extender" is probably your most economical opyion, this takes the HDMI signal from the back of your cable box, and broadcasts it to a receiver connected to a TV/monitor somewhere else. This takes care of video and audio, but if you want to be able to change channels remotely, you are out of luck. There are IR and RF extenders for remotes as well, but far less standardized.


No cable box (yet?). When I had cable six or seven years ago, did not need a box. Had a t-fitting where one end went to the tv and the other to a cable modem. Previous owner(s?) had extensions routed under carpet and outside the house - none did it the "right" way - and cables were connected into the tv. Since getting rid of cable, the old carpet has been removed and holes patched.


Been quite awhile since boxes aren’t needed.
I dumped cable for a few reasons main being a box required for every TV adding at least $2 a TV a month.
The days of just plugging the coax to the TV met away from pretty much all the cable companies I am aware of.


————————————————
The world's not perfect, but it's not that bad.
If we got each other, and that's all we have.
I will be your brother, and I'll hold your hand.
You should know I'll be there for you!
 
Posts: 25942 | Registered: September 06, 2003Reply With QuoteReport This Post
Not as lean, not as mean,
Still a Marine
Picture of Gibb
posted Hide Post
I'm on Spectrum Cable, and it's 100% digital now so a box is required.
That said, they do have a streaming app, and I have Samsung TVs that have that app native to their "smart" options.
For TVs without that, I use a roku device.
It's not a flawless system, but it beats running cables and paying 6 bucks a month per box.

Look into your provider's offerings to see if they have a streaming service available.




I shall respect you until you open your mouth, from that point on, you must earn it yourself.
 
Posts: 3408 | Location: Southern Maine | Registered: February 10, 2008Reply With QuoteReport This Post
Member
Picture of 4MUL8R
posted Hide Post
The solution for me was simple.
1. Cut cord
2. Have cable company install ethernet cable into my home
3. Connect one of three Google WiFi access points to the ethernet and create mesh WiFi
4. Connect all electronics wirelessly to the Google WiFi access points
5. Donate all Cat6 and coax cables to the nearby thrift store


-------
Trying to simplify my life...
 
Posts: 5332 | Location: Commonwealth of Virginia | Registered: January 15, 2007Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Question About Cable

© SIGforum 2024