SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    I had Absolutely no intention of getting new wheels for the Tundra! Update: not looking too good
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
I had Absolutely no intention of getting new wheels for the Tundra! Update: not looking too good Login/Join 
Raised Hands Surround Us
Three Nails To Protect Us
Picture of Black92LX
posted
That all changed quickly. Got lucky and found a close out on fifteen52’s TurboMac HD!


$430 shipped for a set of $1300 wheels was very difficult to pass up. Fifteen52 makes a solid wheel from all I have read. Put larger A/T tires on the factory wheels when I bought it in July so I’ll just swap them on over same with my TPMS and sell my factory wheels to make up some if not most of what I spent on these wheels.
Can’t wait for them to get here. Same with Black Friday as I have my suspension setup picked out just hoping for some deals!

This message has been edited. Last edited by: Black92LX,


————————————————
The world's not perfect, but it's not that bad.
If we got each other, and that's all we have.
I will be your brother, and I'll hold your hand.
You should know I'll be there for you!
 
Posts: 25829 | Registered: September 06, 2003Reply With QuoteReport This Post
Ice age heat wave,
cant complain.
Picture of MikeGLI
posted Hide Post
Hot damn, look at those.




NRA Life Member
Steak: Rare. Coffee: Black. Bourbon: Neat.
 
Posts: 9774 | Location: Orlando, Florida | Registered: July 12, 2005Reply With QuoteReport This Post
Info Guru
Picture of BamaJeepster
posted Hide Post
quote:
Originally posted by Black92LX:
I had Absolutely no intention of getting new wheels for the Tundra!


Come on, man!

I don't believe that for a second!! Wink Big Grin Big Grin


(They do look good)



“Facts are stubborn things; and whatever may be our wishes, our inclinations, or the dictates of our passions, they cannot alter the state of facts and evidence.”
- John Adams
 
Posts: 29408 | Location: In the red hinterlands of Deep Blue VA | Registered: June 29, 2001Reply With QuoteReport This Post
Member
posted Hide Post
Nice, very nice!!!!

What a great deal!!


_________________________________________________

"Once abolish the God, and the Government becomes the God." --- G.K. Chesterton
 
Posts: 3856 | Location: WNY | Registered: April 11, 2009Reply With QuoteReport This Post
Raised Hands Surround Us
Three Nails To Protect Us
Picture of Black92LX
posted Hide Post
I had not planned on it. Was happy spending the money elsewhere.

Doing some more reading turns out these particular wheels were designed by Ken Block and they were on the Hoonigan Truck in Gymkhana 10 and on his Raptor.
So I guess they aren’t too shabby. Though I am guessing his differ slightly from the mass produced wheels.


————————————————
The world's not perfect, but it's not that bad.
If we got each other, and that's all we have.
I will be your brother, and I'll hold your hand.
You should know I'll be there for you!
 
Posts: 25829 | Registered: September 06, 2003Reply With QuoteReport This Post
Member
posted Hide Post
Well, that escalated quickly.


P229
 
Posts: 3975 | Location: Sacramento, CA | Registered: November 21, 2008Reply With QuoteReport This Post
Member
Picture of JohnCourage
posted Hide Post
Post pics when you get them mounted up please.


JC
 
Posts: 1313 | Location: Roswell, GA | Registered: June 27, 2006Reply With QuoteReport This Post
Info Guru
Picture of BamaJeepster
posted Hide Post
quote:
Originally posted by Black92LX:
I had not planned on it. Was happy spending the money elsewhere.


When a deal pops up you gotta be ready to move.

Jumped on a deal for a Kawasaki Mule 3010 diesel and had it delivered today. We've been looking for a UTV for the farm as we are settling in and the owner of the local Kubota dealership called me about this Mule he took in on trade - only 450 hours, in great shape. Windshield, roof, door kit, LED lightbar on front - delivered for $6K. Couldn't pass it up.

It was going to be Feb or Mar before he could get the basic model Kubota we were looking for and it was going to be at lease twice as expensive. Easy decision.

Sometimes deals pop up that you just can't refuse!

BTW: The Kawasaki dealership had no ETA on orders - if you wanted anything other than the few they had on the lot he said expect a minimum of 6 months and he thought it would actually be longer. The 'bota dealer checked inventory of every dealer within 300 miles to try to find what we were originally looking at.



“Facts are stubborn things; and whatever may be our wishes, our inclinations, or the dictates of our passions, they cannot alter the state of facts and evidence.”
- John Adams
 
Posts: 29408 | Location: In the red hinterlands of Deep Blue VA | Registered: June 29, 2001Reply With QuoteReport This Post
Republican in training
Picture of DonDraper
posted Hide Post
Well done. I like those.


--------------------
I like Sigs and HK's, and maybe Glocks
 
Posts: 2289 | Location: SC | Registered: March 16, 2011Reply With QuoteReport This Post
Purveyor of
Fine Avatars
Picture of Orguss
posted Hide Post
You and your wheels...

They look great. I wish I could do fifteen52s on my Taurus.



"I'm yet another resource-consuming kid in an overpopulated planet raised to an alarming extent by Hollywood and Madison Avenue, poised with my cynical and alienated peers to take over the world when you're old and weak!" - Calvin, "Calvin & Hobbes"
 
Posts: 18124 | Location: Sonoma County, CA | Registered: April 09, 2004Reply With QuoteReport This Post
Waiting for Hachiko
Picture of Sunset_Va
posted Hide Post
You should keep your stock wheels.

Not saying I don't like the new wheels.
But you never know if the stock wheels would come in handy.


美しい犬
 
Posts: 6673 | Location: Near the Metropolis of Tightsqueeze, Va | Registered: February 18, 2007Reply With QuoteReport This Post
Member
Picture of msfzoe
posted Hide Post
Looking good.
Always ego gratifying to mod your truck.
I'm adding LED bulbs to my 18 TRD offroad Taco.
Huge difference in lumens and nighttime visability.
 
Posts: 2427 | Location: newyorkistan | Registered: January 06, 2008Reply With QuoteReport This Post
thin skin can't win
Picture of Georgeair
posted Hide Post
shocking
Wink

Heck those would look good on my ML350 too!



You only have integrity once. - imprezaguy02

 
Posts: 12888 | Location: Madison, MS | Registered: December 10, 2007Reply With QuoteReport This Post
Member
Picture of mark60
posted Hide Post
Sweet wheels. The take off's should be easy to sell. I bought some off one of the Tundra forums a while back to run my winter tires on.
 
Posts: 3596 | Location: God Awful New York | Registered: July 01, 2006Reply With QuoteReport This Post
Vi Veri Veniversum Vivus Vici
Picture of ChuckFinley
posted Hide Post
Those are impressive, congrats!




_________________________
NRA Endowment Member
_________________________
"Of all tyrannies, a tyranny exercised for the good of its victims may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated; but those who torment us for our own good will torment us without end, for they do so with the approval of their own conscience." -- C.S. Lewis
 
Posts: 5701 | Location: District 12 | Registered: June 16, 2012Reply With QuoteReport This Post
Gone but Together Again.
Dad & Uncle
Picture of h2oys
posted Hide Post
Look nice!
 
Posts: 3855 | Location: St. Louis, MO | Registered: November 24, 2009Reply With QuoteReport This Post
Member
Picture of valkyrie1
posted Hide Post
Very nice,looks great..
 
Posts: 2366 | Location: Florida | Registered: March 01, 2012Reply With QuoteReport This Post
Raised Hands Surround Us
Three Nails To Protect Us
Picture of Black92LX
posted Hide Post
quote:
Originally posted by Orguss:
You and your wheels...

They look great. I wish I could do fifteen52s on my Taurus.


Folks like to poke fun about me and wheels yet this will be the first set of aftermarket wheels I have bought.
All my other vehicles have had factory wheels. My 92 Mustang had aftermarket wheels when I bought it but those have since been replaced with the factory Pony wheels.
My 98 Mustang had factory Bullits on it when I bought it and traded those to factory 03/04 Cobra wheels.
My 2000 Silverado wheels had corroded lips so I was slowly loosing air and I put a set of factory 2010 Silverado Wheels on it.

Fifteen52 seems to be pretty heavy in the Porsche/VW world as well as the Ford Focus and Rally world thanks to Ken Block I would presume.
The off-road truck world seems to be pretty fresh for them.

Do they not have any wheels for the SHO bolt pattern.

For $400 bucks it would have been silly not to grab them since they are better designed for off roading that I plan on doing than my factory wheels.
When I got tires when I bought the truck I went up to 33” tires and only mildly aggressive Michelin LTX A/T2s as they were on close out to saving me about $200 on the set. I am afraid I’ll want to step up to a more aggressive AT like the Cooper Discover STT Pro for looks. Thankfully I don’t think I’ll out wheel these tires so they’ll likely stay.
quote:
Originally posted by msfzoe:
Looking good.
Always ego gratifying to mod your truck.
I'm adding LED bulbs to my 18 TRD offroad Taco.
Huge difference in lumens and nighttime visability.

I added yellow housings and yellow LED fog light bulbs a few months back and they look great.
I will be adding the newer Tundra black housed LED OEM headlights sometime in the near future.


————————————————
The world's not perfect, but it's not that bad.
If we got each other, and that's all we have.
I will be your brother, and I'll hold your hand.
You should know I'll be there for you!
 
Posts: 25829 | Registered: September 06, 2003Reply With QuoteReport This Post
Member
posted Hide Post
Where did you find such a good deal? I too have "no intention of getting new wheels" for my Sierra. Wink
 
Posts: 75 | Location: New Mexico | Registered: July 28, 2018Reply With QuoteReport This Post
Member
Picture of P250UA5
posted Hide Post
IIRC, your Tundra is 'red'? That'll be a nice contrast.

Personally, I'm not a fan of the 'beadlock' bolts in the rim & that was one thing (along with $$) that kept me from really looking at aftermarket wheels when I had the F150.




The Enemy's gate is down.
 
Posts: 16278 | Location: Spring, TX | Registered: July 11, 2011Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    I had Absolutely no intention of getting new wheels for the Tundra! Update: not looking too good

© SIGforum 2024