Tundra Window Control Module

https://www.3wliners.com/produ...-control-module-low/

The vast majority of Tundras only have 1 touch auto down for the driver’s window. Some have auto up and down.

This module makes all 4 windows 1 touch auto up and down from the driver’s door switches.
It also allows you to roll the windows up and down from the vehicle remote.
I have had it for about 3 months now but not had a chance to install it until the other day.
Install is completely plug and play. Pop the door panel off and plug the unit into the current harness.
The most difficult part is running a power wire directly to the battery. Which is not very difficult. Wiggling the wire through the door to cab grommet was a little tricky but once you get it through there is a grommet right by the kick panel that goes through the firewall.
Then hook the ring terminal to the battery. I presume that the window motors draw some pretty solid amperage is why they want you to run directly to the battery instead of tapping a constant power in the cab.
There is a fuse on the power wire near the battery.

I so wish that this made the rear window one touch as well but sadly it does not.

The only quirk, if you want to call it that, I have found is that two windows on the same side will not automatically roll up at the same time. For example If the front passenger is going up automatically and you flip the switch for the rear passenger the front passenger will stop and the rear passenger will go up.
Not really a huge deal. Just do the fronts and then the rears.

Super nice that if your windows are down and you are going in the store. Hit the lock button twice and the windows roll on up.

Seems to be a well put together kit.

Do the windows have the appropriate anti-pinch sensors?

Not that I have a Tundra, but curious if the module adds that functionality through voltage sensors or something.