SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Router advice for someone in their seventies
Go
New
Find
Notify
Tools
Reply
  
Router advice for someone in their seventies Login/Join 
Lighten up and laugh
Picture of Ackks
posted
I'm trying to help someone in my family and could use some advice. He purchased a Linksys N600 a few years ago that is still sealed in the box, but would he be better off buying something manufactured more recently? Best Buy suggested either the Netgear AC1750 or the AC1000. The AC1750 is a better router, but that would probably exceed his needs. His service is 150 mbps and he would at most have a laptop and a Roku on the network at the same time. Thank you all for any help you could give me.
 
Posts: 7934 | Registered: September 29, 2008Reply With QuoteReport This Post
Member
posted Hide Post
I personally wouldn't buy a new router until the WPA3 is widely supported or the new router is upgradable


-------------------------------------------------------------------------------------------
Live today as if it may be your last and learn today as if you will live forever
 
Posts: 6322 | Location: New Orleans...outside the levees, fishing in the Rigolets | Registered: October 11, 2009Reply With QuoteReport This Post
Member
Picture of lkdr1989
posted Hide Post
Security-wise, probably better off getting a newer router, the one I'm currently using is a Linksys EA7500 AC1900, I bought it as a refurb and although it's not the newest/fastest/most-features, it's been pretty reliable.

https://www.amazon.com/gp/offe...e=UTF8&condition=all

**If you have a router, make sure your "firmware" is up-to-date.




...let him who has no sword sell his robe and buy one. Luke 22:35-36 NAV

"Behold, I send you out as sheep in the midst of wolves; so be shrewd as serpents and innocent as doves." Matthew 10:16 NASV
 
Posts: 4408 | Location: Valley, Oregon | Registered: June 03, 2010Reply With QuoteReport This Post
Eating elephants
one bite at a time
Picture of ffips
posted Hide Post
What is the Internet source (phone line or cable)? What device has that provider given as an interface? Will the devices be interacting as wired or wireless devices? With only two devices, what benefit are you hoping to gain with a router?
 
Posts: 3587 | Location: in the southwest Atlanta metro area | Registered: September 10, 2006Reply With QuoteReport This Post
Lighten up and laugh
Picture of Ackks
posted Hide Post
quote:
Originally posted by ffips:
What is the Internet source (phone line or cable)? What device has that provider given as an interface? Will the devices be interacting as wired or wireless devices? With only two devices, what benefit are you hoping to gain with a router?

Cable ISP, laptop and a Roku are wireless, and his current router went down, so he needs to replace it.
 
Posts: 7934 | Registered: September 29, 2008Reply With QuoteReport This Post
Ignored facts
still exist
posted Hide Post
quote:
Originally posted by Ackks:
he would at most have a laptop and a Roku on the network at the same time. Thank you all for any help you could give me.


I got one of these...
https://www.amazon.com/gp/prod...ilpage?ie=UTF8&psc=1
..and I'm totally happy. Budget priced. It fits the needs of a small installation, secure, fast. Most important, it's VERY EASY to set up. VERY EASY.

If his Roku and laptop are just a room or two from the router, then this is fine. But, For longer range, maybe something else might be better.


.
 
Posts: 11213 | Location: 45 miles from the Pacific Ocean | Registered: February 28, 2003Reply With QuoteReport This Post
Never Go
Full Retard
Picture of MitchbSC
posted Hide Post
The most non-techie friendly routers that I've used recently are Eero and Google Wifi. I went with mesh routers to cover some dead spots in the house. The management interfaces are extremely simple compared to the Linksys stuff that I used to run.




They don't think it be like it is, but it do.
 
Posts: 4797 | Location: SC | Registered: January 27, 2001Reply With QuoteReport This Post
Member!
posted Hide Post
you need to simply hook up the N600 router and see if he's happy with the connect speeds. You said he's using only two devices anyways and the connect speeds are more often limited by the devices compared to the router anyways especially if the devices you are using can't use the bandwidth or features. If everything works great, a fancy new router isn't going to make everything work better unless you know what weaknesses or problems the old router is giving you anyway.
 
Posts: 4371 | Location: Boise, ID USA | Registered: February 14, 2003Reply With QuoteReport This Post
quarter MOA visionary
Picture of smschulz
posted Hide Post
If the old one is "out" then plug in the new one and THEN see if you actually have a problem that needs fixing.
 
Posts: 23423 | Location: Houston, TX | Registered: June 11, 2006Reply With QuoteReport This Post
Lighten up and laugh
Picture of Ackks
posted Hide Post
The poor guy just tried to start the process on the N600 and the disk had a physical defect. I'm not close to him, so I wasn't able to help him get around that. We'll have to get him a new one, which may be a blessing anyway.
 
Posts: 7934 | Registered: September 29, 2008Reply With QuoteReport This Post
quarter MOA visionary
Picture of smschulz
posted Hide Post
quote:
N600 and the disk had a physical defect


What disk?
The router has no disks.
If you are talking about an "install" disk > you don't need one.
 
Posts: 23423 | Location: Houston, TX | Registered: June 11, 2006Reply With QuoteReport This Post
Lighten up and laugh
Picture of Ackks
posted Hide Post
Yes, the install disk. I tried to walk him through the process of getting around it, but it only frustrated him. It's alright. We'll just get him a new one and it may be better for him anyway.
 
Posts: 7934 | Registered: September 29, 2008Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Router advice for someone in their seventies

© SIGforum 2024