SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    So What Is The Deal With OFF Bug Spray And Hazy/Cloudy Headlights?
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
So What Is The Deal With OFF Bug Spray And Hazy/Cloudy Headlights? Login/Join 
Get my pies
outta the oven!

Picture of PASig
posted
My beater Mazda gets cloudy headlights and then I polish them a bit and spray with a sealer and get another year. They are really cloudy again and I'm out there trying to get them somewhat clear again with some polishing compound and baking soda and not getting very far. I recall hearing about OFF bug spray being used by some people to clean that up so I try it. Sprayed one and BAMMMM it's clear as can be, like brand new clear.

Is this melting a layer off? Filling in scratches? I did the other then wiped it off then cleaned it with rubbing alcohol and they got a little less clear but still way better than before. Then when dry I sprayed with my Meguiars headlight sealer spray and they got nice and clear again. I think I'm going to use this method from now on instead of polishing compound and baking soda.

This is the stuff I use for sealing:



 
Posts: 35148 | Location: Pennsylvania | Registered: November 12, 2007Reply With QuoteReport This Post
Not really from Vienna
Picture of arfmel
posted Hide Post
DEET melts plastic
 
Posts: 27275 | Location: SW of Hovey, Texas | Registered: January 30, 2007Reply With QuoteReport This Post
Little ray
of sunshine
Picture of jhe888
posted Hide Post
Deet is a powerful solvent and will melt many plastics. Be careful with it.




The fish is mute, expressionless. The fish doesn't think because the fish knows everything.
 
Posts: 53411 | Location: Texas | Registered: February 10, 2004Reply With QuoteReport This Post
Member
posted Hide Post
Wife’s 4runner lenses got fuzzy and yucky yelllow after 10+ years. Consulted various you tube Videos and Tried deet and it was only marginally better. She was out for a few days visiting her bestie and I changed the incandescent bulbs with cheap Amazon LED upgrades. It’s like night and day. Now she’s the jerk with bright lights that look like high beams but are the normal beam. The high beam lights up the next county. But we live down a long road with no street lights so oh well.

Try upgrading to LED bulbs. If not your style then try rockauto. New headlight pods are pretty cheap. My 16 year old changed both his on his 99 Ford for not much $$
 
Posts: 5108 | Location: Florida Panhandle  | Registered: November 23, 2008Reply With QuoteReport This Post
Shit don't
mean shit
posted Hide Post
Just get 2 new lenses. Check Rock Auto and go OEM if possible. I've got a 2004 Silverado and a 2010 Tahoe and the new ones are so much better than screwing around polishing old ones. My .02
 
Posts: 5835 | Location: 7400 feet in Conifer CO | Registered: November 14, 2006Reply With QuoteReport This Post
Get my pies
outta the oven!

Picture of PASig
posted Hide Post
quote:
Originally posted by ElToro:
Wife’s 4runner lenses got fuzzy and yucky yelllow after 10+ years. Consulted various you tube Videos and Tried deet and it was only marginally better. She was out for a few days visiting her bestie and I changed the incandescent bulbs with cheap Amazon LED upgrades. It’s like night and day. Now she’s the jerk with bright lights that look like high beams but are the normal beam. The high beam lights up the next county. But we live down a long road with no street lights so oh well.

Try upgrading to LED bulbs. If not your style then try rockauto. New headlight pods are pretty cheap. My 16 year old changed both his on his 99 Ford for not much $$


I put Silverstar Ultras (halogen bulbs) in our vehicles. We aren't new enough on either vehicle yet to have the insanely bright OEM LED headlights that seem to be standard now.


 
Posts: 35148 | Location: Pennsylvania | Registered: November 12, 2007Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by PASig:

I put Silverstar Ultras (halogen bulbs) in our vehicles. We aren't new enough on either vehicle yet to have the insanely bright OEM LED headlights that seem to be standard now.


Check around there should be a plug and play LED option. The technology has really improved and they are self contained LED bulbs now. Even a few years ago you had to upgrade your wiring and practically needed to hire an electrical engineer to accomplish the install.
 
Posts: 5108 | Location: Florida Panhandle  | Registered: November 23, 2008Reply With QuoteReport This Post
Shall Not Be Infringed
Picture of nhracecraft
posted Hide Post
^^^Just FYI re: Silverstar Ultra Bulbs...Save your receipts! I experienced SIGNIFICANTLY shorter life w/ those bulbs compared to others. I went through a few sets before I became aware that Sylvania has pretty good replacement warranty (12-months customer satisfaction), but you need the original purchase receipt. Actually I switched to the regular Silverstars and got much better life prior to learning about the warranty replacement, but the bulbs are such a pain in the ass to replace in my vehicle(s) that even though the Ultras provided better illumination, I just stuck w/ the Silverstars anyway.

For the record, my vehicles were 2001-2009 Volvos (two XC70s and an S60), and in those cars (safety first!), the headlights are on ALL THE TIME, as the low beam functions as the DRL, which definitely doesn't help with the lifespan of the bulbs. In fact, the Silverstar Ultras were failing in 9-10 months, if not sooner! Volvo actually released a pigtail w/ a resistor to add to the headlight harness to helped with the bulb life in my '01 XC70 (they were failing at 6 months in that car!), and while it was an improvement, it didn't completely solve the problem. Also, if replacement wasn't a big enough pain in the ass already due to VERY Poor access to the back of the headlight capsule, once the lenses are deteriorated (cloudy/yellowed due to the UV coating failing) you lose the ability to see clearly through the front of the headlight when inserting the bulb which is all the more frustrating. I had to remove the bumper cover once to remove the entire headlight capsule that the H11 bulb had become wedged in during installation. The bulb was not perfectly square to the mount when I attempted to install it and only 2 of the 3 tabs were in the proper position. when I rotated it, it became stuck and I couldn't get it unstuck w/o removing the headlight capsule from the car! Mad


____________________________________________________________

If Some is Good, and More is Better.....then Too Much, is Just Enough !!
Trump 2024....Make America Great Again!
"May Almighty God bless the United States of America" - parabellum 7/26/20
Live Free or Die!
 
Posts: 9646 | Location: New Hampshire | Registered: October 29, 2011Reply With QuoteReport This Post
Member
Picture of P250UA5
posted Hide Post
quote:
Originally posted by ElToro:
quote:
Originally posted by PASig:

I put Silverstar Ultras (halogen bulbs) in our vehicles. We aren't new enough on either vehicle yet to have the insanely bright OEM LED headlights that seem to be standard now.


Check around there should be a plug and play LED option. The technology has really improved and they are self contained LED bulbs now. Even a few years ago you had to upgrade your wiring and practically needed to hire an electrical engineer to accomplish the install.


I put LEDs in my F150 when I had it. A user on the F150 forum went through many options & measured with calipers to find one where the LED chips were situated as closely as possible to where the incandescent filaments were.
Only time I got flashed was when towing a trailer & the rear was squatted a bit.

quote:
Originally posted by nhracecraft:
^^^Just FYI re: Silverstar Ultra Bulbs...Save your receipts! I experienced SIGNIFICANTLY shorter life w/ those bulbs compared to others. I went through a few sets before I became aware that Sylvania has pretty good replacement warranty, but you need the original purchase receipt. Actually I switched to the regular Silverstars and got much better life prior to learning about the warranty replacement, but the bulbs are such a pain in the ass to replace in my vehicle(s) that even though the Ultras provided better illumination, I just stuck w/ the Silverstars anyway.


The headlights in my Mini are akin to candles in a Mason jar at night. Good enough, but more light would be nice. Planning on a set of Silverstars to hope it'll make an improvement.
Down the road, may swap in projector housings & LEDs, but it's a beater commuter, so I'm not trying to put a ton of $$ into it.
Good to know on the replacement warranty.




The Enemy's gate is down.
 
Posts: 16278 | Location: Spring, TX | Registered: July 11, 2011Reply With QuoteReport This Post
Get my pies
outta the oven!

Picture of PASig
posted Hide Post
quote:
Originally posted by P250UA5:


The headlights in my Mini are akin to candles in a Mason jar at night. Good enough, but more light would be nice.



That's disappointing to hear. I had an 05 Mini Cooper S for 2 years that had projector headlights and I swear they lit up the FRONT and the SIDES of my Mini for like 100 yards.


 
Posts: 35148 | Location: Pennsylvania | Registered: November 12, 2007Reply With QuoteReport This Post
Paddle your
own canoe
Picture of BigWhup
posted Hide Post
Lacquer thinner. dampen a rag, and wipe in one direction from one side to the other. One wipe across usually gets it. Wash the thinner off afterwards. Magic.

Yes it is meting the plastic but gets that shit off easy peasy.
 
Posts: 1577 | Location: South Carolina | Registered: August 06, 2009Reply With QuoteReport This Post
Member
posted Hide Post
Years ago my wife bought some wipes for clear plastics/headlights, from a car detailer and they worked perfectly and lasted a good long time. I wish I had written down the brand name as those things were the bees knees. later, I bought one of the sanding kits and it went terrible. I wound up buying new housings for the car after that.
 
Posts: 7194 | Location: Treasure Coast,Fl. | Registered: July 04, 2003Reply With QuoteReport This Post
goodheart
Picture of sjtill
posted Hide Post
Lacquer thinner is acetone so you can just use that. But wear gloves, it will take all the oil out of the skin on your hands.


_________________________
“Remember, remember the fifth of November!"
 
Posts: 18617 | Location: One hop from Paradise | Registered: July 27, 2004Reply With QuoteReport This Post
Member
Picture of P250UA5
posted Hide Post
quote:
Originally posted by PASig:
quote:
Originally posted by P250UA5:


The headlights in my Mini are akin to candles in a Mason jar at night. Good enough, but more light would be nice.



That's disappointing to hear. I had an 05 Mini Cooper S for 2 years that had projector headlights and I swear they lit up the FRONT and the SIDES of my Mini for like 100 yards.


2010 R57 base model with the base halogen reflectors.
They're acceptable for the driving I do, but could definitely use some improvement.




The Enemy's gate is down.
 
Posts: 16278 | Location: Spring, TX | Registered: July 11, 2011Reply With QuoteReport This Post
Member
Picture of SigSentry
posted Hide Post
quote:
Originally posted by arfmel:
DEET melts plastic


And Bic pens, while in your hand, trying to wrruite. Eek
 
Posts: 3660 | Registered: May 30, 2011Reply With QuoteReport This Post
Transplanted Hillbilly
Picture of Fire Away
posted Hide Post
CeraKote makes a headlight restore kit. I've used it on two vehicles and seems to be holding up well. You can get it on Amazon.

Cerakote Headlight Restoration Kit
 
Posts: 1959 | Location: Central Pennsylvania | Registered: December 08, 1999Reply With QuoteReport This Post
Little ray
of sunshine
Picture of jhe888
posted Hide Post
quote:
Originally posted by sjtill:
Lacquer thinner is acetone so you can just use that. But wear gloves, it will take all the oil out of the skin on your hands.


Lacquer thinner usually has some acetone in it, but it has other solvents in it, too. Different makers formulate it differently. It is usually cheaper than pure acetone.

Both are not really very good for you. Don't get them on you or breathe them.




The fish is mute, expressionless. The fish doesn't think because the fish knows everything.
 
Posts: 53411 | Location: Texas | Registered: February 10, 2004Reply With QuoteReport This Post
Member
Picture of wrightd
posted Hide Post
quote:
Originally posted by jhe888:
Deet is a powerful solvent and will melt many plastics. Be careful with it.

True. Long time ago I was deer hunting on a hot day, used 95% Deet for the mosquitoes, and the deet on my forearm melted the factory finish on part of my wood gunstock. After that I thought good lord, but then I thought it was prob better than contracting encephalitis.




Lover of the US Constitution
Wile E. Coyote School of DIY Disaster
 
Posts: 9087 | Location: Nowhere the constitution is not honored | Registered: February 01, 2008Reply With QuoteReport This Post
Member
Picture of wrightd
posted Hide Post
quote:
Originally posted by jhe888:
quote:
Originally posted by sjtill:
Lacquer thinner is acetone so you can just use that. But wear gloves, it will take all the oil out of the skin on your hands.


Lacquer thinner usually has some acetone in it, but it has other solvents in it, too. Different makers formulate it differently. It is usually cheaper than pure acetone.

Both are not really very good for you. Don't get them on you or breathe them.

I've used both for various purposes, jhe is right, it's very unhealthy, I always wear disposable gloves for very short duration, or thick protective chemical gloves if I'm going to be using it for any length of time, along with a charcoal organic vapor rated 3m mask. I've seen guys on youtube dousing their work with it using bare hands, makes me cringe. Think brake cleaner, that stuff has those and other ingredients.




Lover of the US Constitution
Wile E. Coyote School of DIY Disaster
 
Posts: 9087 | Location: Nowhere the constitution is not honored | Registered: February 01, 2008Reply With QuoteReport This Post
Member
Picture of ruger357
posted Hide Post
quote:
Originally posted by arfmel:
DEET melts plastic


And people rub this on their skin and absorb it in their bodies.

This message has been edited. Last edited by: ruger357,


-----------------------------------------

Roll Tide!

Glock Certified Armorer
NRA Certified Firearms Instructor
 
Posts: 8040 | Location: Hoover, AL | Registered: November 06, 2006Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    So What Is The Deal With OFF Bug Spray And Hazy/Cloudy Headlights?

© SIGforum 2024