Long story, but I have some clear polyurethane finished maple cabinets that were dusted for fingerprints 4 years ago. I'm trying now for the first time to clean them. Soap and water hasn't worked.
Ideas?
Posts: 11815 | Location: SWFL | Registered: October 10, 2007
______________________________ “I'd like to know why well-educated idiots keep apologizing for lazy and complaining people who think the world owes them a living.” ― John Wayne
Originally posted by TXJIM: Try wet sanding it with 1000 grit paper by hand.
If it was me, I’d be influenced to started with much finer than that, say 2-3,000 grit. Without pics, it’s hard to say and I’m not expert, but the poly finish directs my reply. In a former job, I had occasion to sand platics and 1000 grit was for surface leveling and we worked up to 3,000 grit before buffing to make it smooth. The thickness of the finish would dictate the best recourse. Likely, a bit of Flitz on a soft rag may just well do the job.
______________________________________________ Carthago delenda est
Who'd you kill? Try Murphy's oil soap mixed with water. It's what I clean wood with. You may need to wet an old toothbrush and scrub a bit...
"Some things are apparent. Where government moves in, community retreats, civil society disintegrates and our ability to control our own destiny atrophies. The result is: families under siege; war in the streets; unapologetic expropriation of property; the precipitous decline of the rule of law; the rapid rise of corruption; the loss of civility and the triumph of deceit. The result is a debased, debauched culture which finds moral depravity entertaining and virtue contemptible." -- Justice Janice Rogers Brown
"The United States government is the largest criminal enterprise on earth." -rduckwor
Posts: 24753 | Location: St. Louis, MO | Registered: April 03, 2009
I am a crime scene detective. I don't know about stuff that has been sitting for four years, but we typically tell people windex. There is also a product made specifically for removal of fingerprint powder. I looked online, but don't see it in any of the suppliers catalogs. It's called powder blaster or something like that. I'll look at work Sunday when I go in.
Posts: 553 | Location: Ohio | Registered: April 13, 2012
When I worked CSI I always suggested Windex or another cleaner that contained ammonia. Sitting there that long though I'd be concerned that it's actually worked itself into the finish.
I felt sorry for the people with property which I or our crime scene technicians dusted. Sometimes, I'd use the victim's paper towels, a little water and a dab of dish soap. Windex and just regular cleaning sprays work as stated above. Also, don't forget many powders are volcanic ash so be careful.
Retired Texas Lawman
Posts: 1226 | Location: Texas | Registered: March 03, 2016
Thank you all for the suggestions. We haven't used the cabinets in four years, so it's interesting the dust works it's way into to finish without external force. I'll try the Windex first and work my way towards the more destructive methods.
I'll probably skip tbe acetone. I already had an unintentional experience with it on our dining room table.
Posts: 11815 | Location: SWFL | Registered: October 10, 2007
Here's a short version of a long story. Back in late '70's I was detective working auto theft. Had a gentleman come in early one morning crying and moaning that his new silver edition Pontiac Trans Am had been stolen. Seems he had picked up his "favorite" prostitute and spent night at a motel. When he awoke, his "favorite" was gone and so was his Trans Am. Fellow was adamant about prosecution, so I started all the paper work including affidavit that he had not given permission for her to drive vehicle, etc. The "favorite" was quite known by the squad and we had been wanting a solid charge on her for some time. Everyone in overdrive, APB put out, detectives checking informants and such. Later that day car was located, abandoned, with keys in ignition. I drove owner to the recovery scene (few blocks from the motel), it was indeed a beautiful vehicle, silver in color with SILVER LEATHER interior, however, owner then states he just wanted us to find his car and did not want to press charges on his "favorite". I actually think he got drunk and forgot where he parked his car and just made up story wanting us to find it for him. Anyway, before releasing vehicle to the owner, I told the ID tech "dust it for prints", (wink, wink)
Would something like automotive clay be worth a shot? That adheres to dirt and with proper lubrication, sticks to the dirt (and not the lube) and pulls it off.
Might be different pulling from off poly-finished wood, or course, but if I had some auto clay handy, I might spray a hidden bit of the affected surface with friendly lube (Murphy Oil Soap?) and try some clay.
Posts: 15207 | Location: North Carolina | Registered: October 15, 2007
Remember those cars in the 80's that had their silver paint peel off in a short amount of time? Well I had a vehicle broken into over night and there was a nice fresh hand print on the roof over the driver's door. Perfect! grabbed the dust kit and got an amazing full right hand print. I applied the acetate hinged lifter and proceeded to pull the silver paint right off the roof. Oops, sorry.
.
