I need a flexible transition strip from hardwood to tile. The floor levels match so a "T" strip would work. I need to have an expansion gap from the hardwood that will be covered by one side of the "T". The radius is approximately 12" for 90° and then a straight shot for about 48" after that bend. Is there anything out there that I can use that won't look like crap and be rigid enough for the expansion gap?
Posts: 3690 | Location: PA | Registered: November 15, 2009
Originally posted by petr: I need a flexible transition strip from hardwood to tile. The floor levels match so a "T" strip would work. I need to have an expansion gap from the hardwood that will be covered by one side of the "T". The radius is approximately 12" for 90° and then a straight shot for about 48" after that bend. Is there anything out there that I can use that won't look like crap and be rigid enough for the expansion gap?
Thanks. I was just going to make my own, but I don't have time. I'm going to cut it at a 45 and get wood "T" molding to place down. I don't have that tile in place yet so it'll be easy enough to do.
Posts: 3690 | Location: PA | Registered: November 15, 2009
