SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    need a new safe
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
need a new safe Login/Join 
Member
Picture of jcsabolt2
posted Hide Post
quote:
Originally posted by g4tx:
Graffunder is nice...

http://www.graffundersafes.com


Very Nice!


Series: B,C,E,F

B-RATE CONSTRUCTION: 1 3/4" overall body constructed of 1/4" A36 high tensile steel outer and 14 & 16 ga. inner plates enclosing a high density composite material. 3 1/2" overall door insulated with U.L. approved insulating material, outer plate being 1/2" thick A36 high tensile steel.

C-RATE CONSTRUCTION: 2" overall body constructed of 1/2" A36 high tensile steel outer and 14 & 16 ga. inner plates enclosing a high density composite material. 4" overall door insulated with U.L. approved insulating material, outer plate being 1" thick A36 high tensile steel

E-RATE CONSTRUCTION: 2 1/2" overall body constructed of 1" A36 high tensile steel outer and 14 & 16 ga. inner plates enclosing a high density composite material. 4 1/2" overall door insulated with U.L. approved insulating material, outer plate being 1 1/2" thick A36 high tensile steel

F-RATE CONSTRUCTION: 2 1/2" overall body constructed of 1" A36 high tensile steel outer and 14 & 16 ga. inner plates enclosing a high density composite material. 4 1/2" overall door insulated with U.L. approved insulating material, outer plate being 1" thick A36 high tensile steel and 1/2" Manganese
1 - hour 1750 degree factory fire rating
8 to 10 solid 1 1/4" stainless steel locking bolts, active front and back to prevent door removal after hinge attack
U.L. listed group II combination lock, with re-lock and 1 million possible combinations
Additional relocking devices activated by tool and/or torch attack for added security
Lock protected by Ball Bearing Anti Drill Barriers
Fully recessed, tightly toleranced door for protection against forced entry
High temperature heat seal door jam with additional intumescent fire and smoke seal
Hardened hinge pins that ride on thrust bearing washers
Attractive paint finishes to choose from
Variety of interiors to choose from
All safes covered by limited lifetime warranty
Model designations (see below): B = B-rated, C = C-rated, E = E rated, and F= F rated

ADDITIONAL FEATURES OF E and F RATE AS FOLLOWS:
U.L. approved Group 1 & 1R manipulation proof lock
Additional anti-drill barrier.
Hardened ball bearing anti-drill barrier protects bolts from punching attack
Graffunder Vault Doors are also available in the E rating and F rating.


----------
“Nobody can ever take your integrity away from you. Only you can give up your integrity.” H. Norman Schwarzkopf
 
Posts: 3653 | Registered: July 06, 2006Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    need a new safe

© SIGforum 2024