SIGforum.com    Main Page  Hop To Forum Categories  What's Your Deal!    Full seal safety glasses fogging up out in the shop
Go
New
Find
Notify
Tools
Reply
  
Full seal safety glasses fogging up out in the shop Login/Join 
Caught in a loop
posted
As I believe I have mentioned in the past my eyesight is not so great. I have to wear pretty crazy glasses to compensate.

I've been spending more time lately building out of metal than wood, so I thought it prudent to finally purchase a pair of prescription safety glasses. They're bulky (18mm thick on the outer edge) which I can deal with, but they've got a seal which seems to just "seal in" the sweat when I start working, which causes my glasses to start fogging up. (Really, I should have been using safety glasses sooner but that's another issue.)

This has happened in the past with other non-safety glasses (the worst ones were the Wiley X safety sunglasses I had about 10 years ago), and the best solution I found was to start wearing more open glasses.

Really, I'd like to use these more as I'd like to keep my $700 glasses out of the shop for longevity's sake, but I'm quite frustrated over this issue. Good thing this is just for a hobby and not for work, at least.


"In order to understand recursion, you must first learn the principle of recursion."
 
Posts: 3388 | Location: Memphis, TN | Registered: August 23, 2010Reply With QuoteReport This Post
Member
posted Hide Post
I have spent a lot of $$$ on "no fog" or "non fogging" goggles or glasses. Including spray on coatings.
Every one of them fogged up.
Maybe someone will chime in with something that actually works


End of Earth: 2 Miles
Upper Peninsula: 4 Miles
 
Posts: 16468 | Location: Marquette MI | Registered: July 08, 2014Reply With QuoteReport This Post
Member
Picture of Krazeehorse
posted Hide Post
When I was scuba diving all the time we spit on the inside and wiped it off. Problem solved. I believe I also heard that rubbing a raw potato (peeled) would help.


_____________________

Be careful what you tolerate. You are teaching people how to treat you.
 
Posts: 5743 | Location: Ohio | Registered: December 27, 2008Reply With QuoteReport This Post
Fighting the good fight
Picture of RogueJSK
posted Hide Post
I use spit in a pinch. But I've had good success pretreating with "Cat Crap" on stuff like safety glasses, ski goggles, and scuba masks. https://ekusa.com/cat-crap-products/
 
Posts: 33284 | Location: Northwest Arkansas | Registered: January 06, 2008Reply With QuoteReport This Post
Striker in waiting
Picture of BurtonRW
posted Hide Post
quote:
Originally posted by Krazeehorse:
When I was scuba diving all the time we spit on the inside and wiped it off. Problem solved. I believe I also heard that rubbing a raw potato (peeled) would help.


Diluted baby shampoo works better than spit (which is fine in a pinch if you’re in the water already).

-Rob




I predict that there will be many suggestions and statements about the law made here, and some of them will be spectacularly wrong. - jhe888

A=A
 
Posts: 16330 | Location: Maryland, AA Co. | Registered: March 16, 2006Reply With QuoteReport This Post
Caught in a loop
posted Hide Post
Thanks for the suggestions. I figured, being the bottomless fountain of knowledge this place is, someone would have a suggestion.

I've used spit in the past to lackluster results. I've heard about soap and potatoes, but the former never really did much but make a mess (I suspect I wasn't doing it right though), and I haven't tried the latter.

Ordering some Cat Crap to try it out.


"In order to understand recursion, you must first learn the principle of recursion."
 
Posts: 3388 | Location: Memphis, TN | Registered: August 23, 2010Reply With QuoteReport This Post
Member
Picture of IntrepidTraveler
posted Hide Post
I've always used Cat Crap on my ski goggles to good effect.




Thus the metric system did not really catch on in the States, unless you count the increasing popularity of the nine-millimeter bullet.
- Dave Barry

"Never go through life saying 'I should have'..." - quote from the 9/11 Boatlift Story (thanks, sdy for posting it)
 
Posts: 3364 | Location: Grapevine TX/ Augusta GA | Registered: July 15, 2007Reply With QuoteReport This Post
Member
posted Hide Post
I use a compound of pork tallow, glycerine and preservative. It works great. A disabled veterans group down here sells it door to door or in front of stores from time to time.
 
Posts: 17294 | Location: Lexington, KY | Registered: October 15, 2006Reply With QuoteReport This Post
Caught in a loop
posted Hide Post
I couldn't have posted this at a better time. I'm about to finish the electronics on my belt grinder (2HP 3 phase motor and a VFD) project. I literally have just 3 wire connections to finish, then I just have to make the base, drill and tap 2 holes, and acquire the belts. I'm excited; I have been wanting a version of this for years. I'm building a 2x42", but I'm fairly certain I can turn it into a 2x72 with a couple of modifications (longer tensioner arm and a longer stick out on the platen arm). I've wanted to get into knife making for years but can't handle the hammer work of forging.

Assuming I can find an appropriate wire tonight is to be the inaugural run on the motor and VFD.


"In order to understand recursion, you must first learn the principle of recursion."
 
Posts: 3388 | Location: Memphis, TN | Registered: August 23, 2010Reply With QuoteReport This Post
Member
posted Hide Post
Cat crap. Works every time including on optics.

I have to wear safety glasses when doing plant work. Our plant was built sometime in the 40’s, there’s no AC. When summer rolls around it sucks and it doesn’t matter what safety glasses you wear, they’re fogging up.


quote:
Originally posted by vulrath:
As I believe I have mentioned in the past my eyesight is not so great. I have to wear pretty crazy glasses to compensate.

I've been spending more time lately building out of metal than wood, so I thought it prudent to finally purchase a pair of prescription safety glasses. They're bulky (18mm thick on the outer edge) which I can deal with, but they've got a seal which seems to just "seal in" the sweat when I start working, which causes my glasses to start fogging up. (Really, I should have been using safety glasses sooner but that's another issue.)

This has happened in the past with other non-safety glasses (the worst ones were the Wiley X safety sunglasses I had about 10 years ago), and the best solution I found was to start wearing more open glasses.

Really, I'd like to use these more as I'd like to keep my $700 glasses out of the shop for longevity's sake, but I'm quite frustrated over this issue. Good thing this is just for a hobby and not for work, at least.
 
Posts: 874 | Location: NE Pennsylvania | Registered: December 10, 2009Reply With QuoteReport This Post
Member
Picture of schrack
posted Hide Post
Roger on Cat Crap!!!! Good product just a shitty name!!!!
 
Posts: 2492 | Location: Delawhere??????????????? | Registered: June 19, 2005Reply With QuoteReport This Post
Inject yourself!
posted Hide Post
I like this Z Clear, I buy it from Hunters HD Gold.

https://huntershdgold.com/stor...40/category=74140616




Do not send me to a heaven where there are no dogs.
Step Up or Stand Aside: Support the Troops !
Expectations are premeditated disappointments.
 
Posts: 8392 | Location: West | Registered: November 26, 2002Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  What's Your Deal!    Full seal safety glasses fogging up out in the shop

© SIGforum 2024