April 19, 2023, 12:56 PM
Jerry1834320 Slide Catch Question?
Old school 1911 shooter with thumb on thumb type on the safety.
Recently switched to a P320 Legion (1911 since the 1960's).Can't believe I made the switch to striker fire but for the better.
Now, my question sometimes my thumb hits the Slide Catch and will lock it open. I changed my thumb position somewhat but it still happens.
Any suggestions? Maybe trimming the catch somewhat?
Thanks for reading!
April 24, 2023, 10:08 PM
SDlocalI have same problem but I know it’s my grip. The catch is very sensitive. I think an extra power slide catch spring would be helpful but I don’t think they are made.
April 25, 2023, 07:18 AM
sigfreundAccording to one site, there is a “low profile” P320 slide catch lever available that may help.
https://www.sigsauerparts.com/...ganese-phosphate-208This site lists the part, but doesn’t characterize it as low profile, so it might be necessary to confirm that.
https://www.midwestgunworks.co...wi/prod/1301763-04-rThe SIG site lists one as well, but without showing the parts number (that I can find).
https://www.sigsauer.com/p320-...ly-kit-9-40-357.htmlThe guidance I’ve seen is that it’s really necessary to reeducate oneself and break the habit of touching the SCL with one’s thumb. One suggestion is to tape something like a BB or other small ball onto the rear knuckle of the support side thumb and then become accustomed to placing the shooting side thumb on top of the BB. Until it becomes a habit, it’s a very tactile reminder and confirmation that the thumb has been moved out and away from the SCL.
April 25, 2023, 08:46 AM
Jerry1834Thanks for the info and replies. Was thinking about cutting the stock one a little but since I can order them - I will today.
April 26, 2023, 12:45 PM
NipperYeah, might be able to reshape it with a Dremel/file. I reshaped my P239 SSL for the same reason. Wasn't about to change my thumb position for one pistol out of many. Good Luck.
April 26, 2023, 04:21 PM
Jerry1834Thanks Nipper! I just ordered two. Figured it would take me longer reshaping them. Along with a little finish touch up.