SIGforum
P239 DAK compatible frame
March 16, 2018, 12:02 PM
charliebP239 DAK compatible frame
Can someone please send me a picture of the right side of P239 DAK compatible frame with the grip panels removed. I called and was told it was compatible, but I am guessing at this point that information is wrong as the trigger bar will not install. My eamail is in my profile or you can text me one to six-eight-two-two-two-nine-eight-six-one-zero. Thanks in advance.
CHARLIEB
[]]]]]]]]]]]]]]]]]]]]]\>
----------)_'_\ * (
''----------------\ - \
''-----------------\ *_\
A few sigs, a couple revolvers, and a few others
"Here hold my beer while I light this" Lefty
March 16, 2018, 12:35 PM
sigfreundAs requested:
Something to be aware of if you don’t have experience with working with DAK pistols is that installing the trigger bar can be very difficult to impossible (for me, anyway) if the sear assembly isn’t removed first. That’s not necessary with DA/SA or DAO mechanisms, but I do it all the time when working with a DAK pistol.
Email sent as well.
► 6.0/94.0
I can tell at sight a Chassepot rifle from a javelin. March 16, 2018, 07:26 PM
charliebThank you. Any chance you have one of a non DAK compatible P239 frame as well?
CHARLIEB
[]]]]]]]]]]]]]]]]]]]]]\>
----------)_'_\ * (
''----------------\ - \
''-----------------\ *_\
A few sigs, a couple revolvers, and a few others
"Here hold my beer while I light this" Lefty
March 16, 2018, 08:41 PM
sigfreundquote:
Originally posted by charlieb:
Thank you. Any chance you have one of a non DAK compatible P239 frame as well?
Unfortunately, no.
► 6.0/94.0
I can tell at sight a Chassepot rifle from a javelin. March 17, 2018, 11:07 AM
az4783054TOP GUN SUPPLY used to have images of non DAK and DAK compatible frames. I think it was in the FAQ section but I don't see them there now. They do list the parts and the suggestion to call SIG with the serial number, which you already know.
I did a Google search using "sig p239 dak and non dak compatible frame jpg" which resulted in a number of hits. Hope that helps.
I've enjoyed my time here, but tired of the whining and general management. Time to move on.
March 18, 2018, 08:03 AM
charliebquote:
Originally posted by az4783054:
TOP GUN SUPPLY used to have images of non DAK and DAK compatible frames. I think it was in the FAQ section but I don't see them there now. They do list the parts and the suggestion to call SIG with the serial number, which you already know.
I did a Google search using "sig p239 dak and non dak compatible frame jpg" which resulted in a number of hits. Hope that helps.
I appreciate the response......... Unfortunately their photos don't work, and the ones I saw were only 229 not the p239. Neither my DAK compatible nor non-compatiable 229s, and 226s, look anything like my 239. The photo above is close but top of the cut appears more rounded than any of my three 239s.
CHARLIEB
[]]]]]]]]]]]]]]]]]]]]]\>
----------)_'_\ * (
''----------------\ - \
''-----------------\ *_\
A few sigs, a couple revolvers, and a few others
"Here hold my beer while I light this" Lefty
March 18, 2018, 09:21 AM
Bulldog7972Charlie, if you can wait till later today I will send you a pic of a non DAK frame if that's what you are asking for.
March 18, 2018, 09:48 AM
Bulldog7972I just sent pics to your email
March 18, 2018, 09:57 AM
charliebThank you.
CHARLIEB
[]]]]]]]]]]]]]]]]]]]]]\>
----------)_'_\ * (
''----------------\ - \
''-----------------\ *_\
A few sigs, a couple revolvers, and a few others
"Here hold my beer while I light this" Lefty