SIGforum.com    Main Page  Hop To Forum Categories  SIG Armorer    P220 DAK Trigger Bar Spring Question

Moderators: Chris Orndorff
Go
New
Find
Notify
Tools
Reply
  
P220 DAK Trigger Bar Spring Question Login/Join 
Member
Picture of hi-power man
posted
Is the P220 DAK trigger bar spring the same as the DA/SA spring ? I have looked at several vendor pages and cannot see any notes referring to either.


* * * * * * *
High capacity is not an acceptable substitute for good marksmanship.
 
Posts: 826 | Location: Kentucky | Registered: December 07, 2006Reply With QuoteReport This Post
Member
posted Hide Post
Short answer: no. If you use older grip panels there may be a minor fitment issue with the newer trigger bar spring.
 
Posts: 766 | Location: CA | Registered: January 23, 2011Reply With QuoteReport This Post
Freethinker
Picture of sigfreund
posted Hide Post
P220 trigger bar springs for DAK and DA/SA models are the same.




“Wise men talk because they have something to say; fools, because they have to say something.”
— Plato
 
Posts: 45451 | Location: 10,150 Feet Above Sea Level in Colorado | Registered: April 04, 2002Reply With QuoteReport This Post
Member
Picture of hi-power man
posted Hide Post
Thanks fellows. This is a used P220 I picked up with no box. Serial number estimate puts it in 2014.


* * * * * * *
High capacity is not an acceptable substitute for good marksmanship.
 
Posts: 826 | Location: Kentucky | Registered: December 07, 2006Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Armorer    P220 DAK Trigger Bar Spring Question

© SIGforum 2022