SIGforum.com    Main Page  Hop To Forum Categories  SIG Armorer    E2 Grip Back Date
Go
New
Find
Notify
Tools
Reply
  
E2 Grip Back Date Login/Join 
Member
posted
Can a P220 Elite with E2 grips be back dated to accept Hogue Rubber or Wood Grips?
 
Posts: 7 | Registered: April 28, 2009Reply With QuoteReport This Post
Rebel Without a Clue
Picture of squad13
posted Hide Post
Yes. You'll need to purchase screws/washers to go with the new set of grips.
 
Posts: 962 | Location: Ohio | Registered: August 14, 2012Reply With QuoteReport This Post
Member
posted Hide Post
What about frame Bushing for screws?
 
Posts: 7 | Registered: April 28, 2009Reply With QuoteReport This Post
Firearms Enthusiast
Picture of Mustang-PaPa
posted Hide Post
The 220 does not use frame bushings.


If the frame is drilled and tapped for the screws threads then all you need are grips, screws and lock washers. If your using factory screws then a sig screw driver that fits the factory screw is desirable gb o keep from buggering the slots up.

Also make sure the grips are of current production. If using old school grips you’ll run into issues with fitment related to the older metal based main spring housing assemblies and possibly they older style de-cocking levers.
 
Posts: 18163 | Location: South West of Fort Worth, Tx. | Registered: December 26, 2008Reply With QuoteReport This Post
Member
posted Hide Post
Thanks for the Info! Tankbuff
 
Posts: 7 | Registered: April 28, 2009Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Armorer    E2 Grip Back Date

© SIGforum 2024