April 10, 2018, 10:00 AM
fishozP220 Take Down Lever
The Take down lever on my P220 is broken/disconnected from the pin. The slide is on the frame and I cannot open the take down pin to remove the slide. Can the take down pin be punched out with the slide on so I can replace the TDL?
April 10, 2018, 11:20 AM
Chris OrndorffYou're going to have to rotate that lever. Punching it out will ruin the frame.
I had a similar issue years ago and got the thing rotated without the lever...can't remember how though.
The part could be drilled and a self-tapping screw used to turn it to the down position.
April 10, 2018, 01:03 PM
GaryBFI suggest sucking it up and sending the gun to SIG. Let the professionals deal with it.
April 10, 2018, 01:22 PM
fishozThanks - exactly the answers I was looking for. I may try to make a "D" shaped tool to turn the pin from the right side. If it doesn't work it's off to Sig.
I was afraid it would damage the frame and couldn't tell from schematics.
April 11, 2018, 12:52 PM
JAFOquote:
Originally posted by fishoz:
Thanks - exactly the answers I was looking for. I may try to make a "D" shaped tool to turn the pin from the right side.
I seem to recall someone else trying that and it worked.
April 17, 2018, 12:53 PM
4MUL8RHow about sending and asking for the sig service package and new x-ray sights as they remove the slide? Might get repair for free.
April 17, 2018, 05:08 PM
fishozI am contacting Sig. I think the service package is $195., well worth it. Gun 10 yrs old and could use the x-ray sights....nite sights getting a bit dim.