July 09, 2022, 01:18 PM
NMDaveSig P220 Bar-Sto Barrel Fitting
Okay brain trust… I just received an order from Bar-Sto. I ordered 2 Semi fit barrels. One for the P226 build I am working on and a Semi fit P220 to upgrade the factory barrel on my stainless framed P220.
I do this often with Bar-Sto barrels without issues. Most need very little if any fitting… maybe some minor stone work to make it cycle flawlessly… Until now.
I sent Bar-Sto an email this morning when I discovered the problem so I am sure they will reach out to me next week to resolve but, I am curious if anyone else has had the same issue.
I had to hand stone the belly of the feed ramp to clear the locking block (totally expected) but when I finally got the slide to rack, the feed ramp does not align with the locking block ramp.
Original barrel functions just fine. Here are some picks I took this morning when I discovered…
Here are the two barrels side-by-side
And the misalignment with the new barrel and the slide locked back
So, am I not seeing the obvious or is the ramp too long and in the wrong location on the new barrel?
July 14, 2022, 09:48 AM
vinnybassI can't say for sure what the hang-up is with your barrel, but here's a thread which may give you some useful info.
https://sigforum.com/eve/forum...520093684#5520093684July 14, 2022, 10:45 AM
NMDaveThanks Vinny. As suspected, Bar-Sto reached out to me Monday morning and agreed there was some machining needed on the feed ramp. They have it now and will be making it right.