Hello everyone,

I'm having a problem with my takedown lever not staying down at the 6:00 position when I field strip my P220. The lever wants to rotate back around 4:00 or so. I have to hold it down with my left hand and manipulate the slide and release with my right in order to field strip. Also, I want to mention that this P220 is practically in new condition, having less than a box of ammo through it. I have never had this problem with any of my other Sigs, so any suggestions are welcome!

Thanks in advance,
Matt

This message has been edited. Last edited by: lilskeez, April 15, 2021 09:50 AM

One of my 5 P220s does the exact same thing. I have no idea why, but then I'm not much of a gunsmith.

Yes, it is sometimes an issue with specific guns. I don’t know what causes it either, but you could try replacing the recoil spring guide rod and/or takedown lever to see if that helps.

Give it a little oil and rotate have a dozen times.

quote:

Originally posted by sigfreund:
Yes, it is sometimes an issue with specific guns. I don’t know what causes it either, but you could try replacing the recoil spring guide rod and/or takedown lever to see if that helps.

To tack on:
Is the guide rod a “fat style” guide rod or standard OEM width?

I appreciate everyone that commented on my post and tried to help me. I ended up sending the pistol back to Sig and just got it back yesterday. The comment from the gunsmith says: "inspected the pistol, replaced the slide catch lever spring, tested without issues."

So apparently the slide catch lever spring was the problem.

Thanks,

Matt Logan