SIGforum.com    Main Page  Hop To Forum Categories  The Gallery    Tools
Page 1 2 3 4 
Go
New
Find
Notify
Tools
Reply
  
Tools Login/Join 
Three Generations
of Service
Picture of PHPaul
posted Hide Post
Just guessing here, but that bottom one looks like a bearing puller for very small bearings.

Another view of the top one would be nice, but perhaps some sort of hand vise?

Thinking jeweler or clockmaker tools.




Be careful when following the masses. Sometimes the M is silent.
 
Posts: 15181 | Location: Downeast Maine | Registered: March 10, 2010Reply With QuoteReport This Post
Raptorman
Picture of Mars_Attacks
posted Hide Post
quote:
Originally posted by rduckwor:
I'll play:

Guess away.

RMD


Watch tools.


____________________________

Eeewwww, don't touch it!
Here, poke at it with this stick.
 
Posts: 34081 | Location: North, GA | Registered: October 09, 2002Reply With QuoteReport This Post
Shaman
Picture of ScreamingCockatoo
posted Hide Post
quote:
Originally posted by PHPaul:
Just guessing here, but that bottom one looks like a bearing puller for very small bearings.

Another view of the top one would be nice, but perhaps some sort of hand vise?

Thinking jeweler or clockmaker tools.



Canon pinion puller.





He who fights with monsters might take care lest he thereby become a monster.
 
Posts: 39716 | Location: Atop the cockatoo tree | Registered: July 27, 2002Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by henryaz:
 
Here's one I made myself. Anyone know what it is?
 


Golden Mean calipers? (also called Golden Ratio or phi)

As shown here: https://goldenmeancalipers.com...-is-the-golden-mean/

Thanks,
Kevin
 
Posts: 130 | Location: Colorado | Registered: August 28, 2010Reply With QuoteReport This Post
member
Picture of henryaz
posted Hide Post
quote:
Originally posted by klstclair:


Golden Mean calipers? (also called Golden Ratio or phi)

Bingo.



When in doubt, mumble
 
Posts: 10778 | Location: South Congress AZ | Registered: May 27, 2006Reply With QuoteReport This Post
member
Picture of henryaz
posted Hide Post
 
I found this old Craftsman rev counter in my Grandfather's basement shop after he passed away.
 



When in doubt, mumble
 
Posts: 10778 | Location: South Congress AZ | Registered: May 27, 2006Reply With QuoteReport This Post
Knows too little
about too much
Picture of rduckwor
posted Hide Post
quote:
Originally posted by Mars_Attacks:
quote:
Originally posted by rduckwor:
I'll play:

Guess away.

RMD


Watch tools.


Yep, Canon pinon puller (very old one) and a roller warmer for resetting roller jewels. I should have thought and taken a picture of the pallet warmer. Maybe tomorrow.

RMD




TL Davis: “The Second Amendment is special, not because it protects guns, but because its violation signals a government with the intention to oppress its people…”
Remember: After the first one, the rest are free.
 
Posts: 20303 | Location: L.A. - Lower Alabama | Registered: April 06, 2008Reply With QuoteReport This Post
Nosce te ipsum
Picture of Woodman
posted Hide Post
I thought it might be a stem puller. Or the tool to remove a clock's hands ...

My new favorite tool, a digital scale, finally arrived. Five year warranty. Five functions for viewing weight.

At last I'll get moving on this project, now that the weight is recorded. The middle image is a Schweitzer (Copy of 1813) violin top which is long overdue to being reunited with the rest of its violin.

Image 1] 1914 Todt top, 67 grams

Image 2] Schweitzer (Copy of 1813) top c.1895, 92 grams

Image 3] A generic shop violin, 1850-1870, 463 grams. A really really nice old violin might come in just under 400 grams, strings and chin rest included (ready to play).





 
Posts: 8759 | Registered: March 24, 2004Reply With QuoteReport This Post
Member
Picture of wingspar
posted Hide Post






---------------
Gary
Will Fly for Food... and more Ammo
Mosquito Lubrication Video

If Guns Cause Crime, Mine Are Defective.... Ted Nugent
 
Posts: 2505 | Location: Oregon | Registered: January 15, 2010Reply With QuoteReport This Post
Three Generations
of Service
Picture of PHPaul
posted Hide Post




Be careful when following the masses. Sometimes the M is silent.
 
Posts: 15181 | Location: Downeast Maine | Registered: March 10, 2010Reply With QuoteReport This Post
Nosce te ipsum
Picture of Woodman
posted Hide Post


Unsure what these are for.

Finally a need for a new tool. ⅛" - 27 tap to touch up the threads when replacing a commercial range gas burner valve. The manifolds are just a piece of steel pipe drilled and tapped. Waiting for the motherload of garage sales has not worked out.
 
Posts: 8759 | Registered: March 24, 2004Reply With QuoteReport This Post
No, not like
Bill Clinton
Picture of BigSwede
posted Hide Post
^^^^ Blacksmith tongs?



 
Posts: 5301 | Location: GA | Registered: September 23, 2009Reply With QuoteReport This Post
Three Generations
of Service
Picture of PHPaul
posted Hide Post
quote:
Originally posted by BigSwede:
^^^^ Blacksmith tongs?


Yup. Probably blacksmith made too.




Be careful when following the masses. Sometimes the M is silent.
 
Posts: 15181 | Location: Downeast Maine | Registered: March 10, 2010Reply With QuoteReport This Post
Member
Picture of Haveme1or2
posted Hide Post

What is the tool left of the anvil ?
 
Posts: 1002 | Location: Mint Hill NC | Registered: November 26, 2016Reply With QuoteReport This Post
Still finding my way
Picture of Ryanp225
posted Hide Post
How about something more technological?
Here's our new desk top CMM.

 
Posts: 10827 | Registered: January 04, 2009Reply With QuoteReport This Post
Three Generations
of Service
Picture of PHPaul
posted Hide Post
What's a CMM?




Be careful when following the masses. Sometimes the M is silent.
 
Posts: 15181 | Location: Downeast Maine | Registered: March 10, 2010Reply With QuoteReport This Post
On the wrong side of
the Mobius strip
Picture of Patrick-SP2022
posted Hide Post
quote:
Originally posted by PHPaul:
What's a CMM?


A coordinate measuring machine (CMM) is a device that measures the geometry of physical objects by sensing discrete points on the surface of the object with a probe. Various types of probes are used in CMMs, including mechanical, optical, laser, and white light. Depending on the machine, the probe position may be manually controlled by an operator or it may be computer controlled.

https://en.wikipedia.org/wiki/...te-measuring_machine




 
Posts: 4123 | Location: Texas | Registered: April 16, 2012Reply With QuoteReport This Post
Three Generations
of Service
Picture of PHPaul
posted Hide Post
quote:
Originally posted by Patrick-SP2022:

A coordinate measuring machine (CMM) is a device that measures the geometry of physical objects by sensing discrete points on the surface of the object with a probe.


Ah. Sounds like something that would be used to set up CNC for replicating a prototype, or maybe a 3D printer.

Cool!




Be careful when following the masses. Sometimes the M is silent.
 
Posts: 15181 | Location: Downeast Maine | Registered: March 10, 2010Reply With QuoteReport This Post
Nosce te ipsum
Picture of Woodman
posted Hide Post
quote:
Originally posted by Haveme1or2:
What is the tool left of the anvil ?


That is to chop your hot rod to the desired length. Maybe.

The tool I posted is stamped stainless steel. Very hand-make looking. Maybe it is for jewelers, to hold their thing while they soldered? With the detents on the handle to hold a clip-in retaining ring?
 
Posts: 8759 | Registered: March 24, 2004Reply With QuoteReport This Post
My hypocrisy goes only so far
Picture of GrumpyBiker
posted Hide Post
I love finding old tools like this hand powered drill press and putting them back to use.
I found pictures of this model on line so I can make the work plate that the material rests on .










This message has been edited. Last edited by: GrumpyBiker,




U.S.M.C.
VFW-8054
III%

"Never let a Wishbone grow where a Backbone should be "



 
Posts: 6931 | Location: Central,Ohio | Registered: December 28, 2008Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2 3 4  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Gallery    Tools

© SIGforum 2024