May 03, 2018, 08:06 PM
flashguyI got bored...
quote:
Originally posted by PHPaul:
quote:
Originally posted by slabsides45:
Ah, the little known "Nuthead" series, squeezed in between the flathead and panhead era. It was, I believe, about a 3 day stint....
I bent up a set of pipes for it the other day. "Loud Pipes Save Lives!"
O, Good! It really needed some straight pipes!
flashguy
Texan by choice, not accident of birth May 04, 2018, 09:01 AM
PHPaulquote:
Originally posted by .38supersig:
Looks like you are having fun with it.
Made an engine out of wire. Later I tried a truck, but only if I could out do the engine. Decided to do an airplane, but only if I could out do the truck. It took an amazing amount of wire to fold and bend into this:
Worked out the geometry where the tail wheel controls the landing gear retracting to and from the wings. Flaps are linked. Cantilever rods and lever geometry take a bit of trial and error. Don't think I can out do this one.
Whoa! Now THAT is cool! I may have to try my hand at that next Winter.
Be careful when following the masses. Sometimes the M is silent.
May 05, 2018, 05:56 PM
.38supersigThanks man. That 750 of yours is awesome!
It took an insane amount of wire. Had to figure out the radius of each fulcrum and cantilever. I had hoped to have the canopy open when the wheels were down, but it took about a month to get as far as I did. By then, I was glad to get it over with. As a reference of scale, the cap for the cowl is from a Dr. Pepper bottle. Made it so if any additional adjustments were needed I can unscrew the cap and take the top half off. Made sure not to look at planes so I wouldn't try to change things as I went. First I thought about covering it with tape or something, then realized it just wouldn't do justice to all the swear words it took to put this together. Plus all the times I made engine noises 'flying' this thing as it neared completion.
Sorry about the jumbo pics...
June 11, 2018, 04:06 AM
KyCooScouring through the garden, I picked up few things on the way to put this piece ut to teach my sons the
gun parts of a pistol.
June 11, 2018, 05:01 PM
PHPaul^^^
Talk about creative! Nice work!
It's all about seeing beyond what something
is and imagining what it can be.
Be careful when following the masses. Sometimes the M is silent.
July 28, 2018, 12:18 PM
PHPaul Feeling creative today.
It all started with "Gee, those bevel gears look a little like radial engines."
Nose is the collar off an old hitch ball, cockpit is part of a handle off a wood stove.
Engine nacelles are a piece of 1/2" pipe with a notch cut out and then bent closed.
Same for the back of the fuselage. Laid out and cut four notches, pinched it together and tacked in place.
Be careful when following the masses. Sometimes the M is silent.
July 29, 2018, 04:42 PM
flashguy^^^^^ Nice! Do you plan to add propellers?
flashguy
Texan by choice, not accident of birth July 30, 2018, 05:03 AM
PHPaulStill contemplating my options there.
I could make something out of sheet stock, but I'm also looking for the right "found thing" to use.
(Just occurred to me, the handles off some flatware spoons would work.)
Be careful when following the masses. Sometimes the M is silent.
July 30, 2018, 03:06 PM
PHPaul
Be careful when following the masses. Sometimes the M is silent.
July 30, 2018, 04:22 PM
ffipsAwesome.
February 26, 2019, 10:03 AM
PHPaulAnother loooong winter.
A snowplow for one of my restored Tonka trucks.
A loose copy of the PATU DC-4 chipper I used to have.
Too cold to clean/prime/paint anything (can't do it in the basement, SWMBO objects...) so they'll remain in the raw until Spring.
Be careful when following the masses. Sometimes the M is silent.
February 27, 2019, 11:11 AM
SSgt USMC/Vetquote:
Originally posted by kcl1960:
Way cool stuff! Don't stop
I agree.
February 27, 2019, 02:16 PM
adorIf you are not a grandpa yet, you will be the coolest one and your grandson will be the coolest kid on the block. Imagine having those toys that only he gets to have. Those are some nice projects.
_______________________
P228 - West German
February 28, 2019, 09:19 AM
redstoneThat is the coolest thing I have seen today. Cant wait to see the next one.
This business will get out of control. It will get out of control and we'll be lucky to live through it. -Rear Admiral (Lower Half) Joshua Painter Played by Senator Fred Thompson February 28, 2019, 10:46 AM
PHPaulquote:
Originally posted by redstone:
That is the coolest thing I have seen today. Cant wait to see the next one.
Started on something today. If it comes out in reality like I picture it in my mind, it's gonna be my best yet.
Gonna take a while tho, I have to take a LOT of breaks when working on fussy stuff or I get too frustrated. That comes from having micrometer ideas and yardstick hands...
Be careful when following the masses. Sometimes the M is silent.
March 03, 2019, 04:02 PM
PHPaul My latest project went quite a bit faster than I expected. It's a more-or-less scale 3 point hitch backhoe, modeled after the Woods 650 I had on the John Deere. Sold it as it wouldn't fit the new Kubota.
There are a few details to add yet, but basically done. Had a LOT of fun doing it, tried out a couple of new techniques. Only got aggravated once and that was with a non-cooperative tool, not the project. That may be a record for me.
Step-by-step pics on my website
Be careful when following the masses. Sometimes the M is silent.
March 12, 2019, 08:41 AM
shovelheadPaul,
I signed up on your website even though what goes on there is waaaaay above my skill level. Signed as shovelhead.
-------------------------------------——————
————————--Ignorance is a powerful tool if applied at the right time, even, usually, surpassing knowledge(E.J.Potter, A.K.A. The Michigan Madman)
March 12, 2019, 10:48 AM
JasonATI How much would it cost to recreate this?
March 12, 2019, 01:14 PM
PHPaulquote:
Originally posted by shovelhead:
Paul,
I signed up on your website even though what goes on there is waaaaay above my skill level. Signed as shovelhead.
Nice! Welcome, and join in. It's been pretty slow of late, but we're all about ideas, tips and tricks. No judging going on.
Be careful when following the masses. Sometimes the M is silent.
March 12, 2019, 01:16 PM
PHPaulquote:
Originally posted by JasonATI:
How much would it cost to recreate this?
Hard to say exactly. If I could gather up the parts, I could approximate it in 3-4 hours of work. I get $25/hr plus materials for general light welding work. Plus shipping.
It'd be fairly heavy as it would have to be mostly steel, I don't have any way to weld aluminum.
Probably fairly large too. Rough guess (depending on what I found for parts) 16-18" long, 6-8" high, and 6" or so deep.
Be careful when following the masses. Sometimes the M is silent.