We haven't made a light specifically for that press, but it looks very similar to the Dillon 550. You can use our sizing guide to determine if one of our existing models will fit.
UFO Sizing Guide
These will print at 1:1 which you can confirm using the scale at the top. You can then determine which is best for you. Please let us know if one will work for you. That is good information to have for future reference.
What adhesive might be used to help re-stick some areas that aren't holding.....
I prepped as instructed with the scub pad and alcohol.
Thank for the advise.
Duty is the sublimest word in the English Language - Gen Robert E Lee.
Assuming all the oil was removed, what I would recommend is that you use a hair dryer to warm the press in the area the light is applied. Also, turn the light on to warm it up. Then press it into place. Temperature can make a world of difference in how well the adhesive sticks.
If that doesn't work for you reach out to us on our website "KMS Squared" and we will do whatever we can to get you taken care of.
Love to get your lite-only I have an RCBS Pro5. Not sure which one would be better to modify to fit. Any suggestions for the correct model?
I don't have the measurements on that press, but you can use our sizing guide to determine if one of our lights will fit.
UFO Sizing Guide
Your two best possibilities would be one of these:
Well guys I guess pictures will tell you just how well this $30 investment works...Use the discount code also to save 10%....They also provide Fast Shipping...I received my package two days after ordering....
I do have other lighting around my press that was on when I was taking these before and after pictures...NOTE the level of bright clear light now on my shell plate compared to the before...well designed product putting the light right where it needs to be. I am very very pleased with this upgrade..
Thanks again V-Tail and KMS....Mark
This message has been edited. Last edited by: sigarmsp226,
I have the IF one for a 650, it is a plastic printed cup that drops down into the center of the tool head. Takes literally 1 second to remove or install. I think the one you went with probably provides better light, just from looking at the design.
I'm all jacked up on Mountain Dew...
|Powered by Social Strata||Page 1 2|