After reading here and on other forums about the KMS light, I bought one. I Installed it yesterday and it makes a great difference. It really lights up the work area.
I had my reloading bench area done when I finished my basement years ago. I told my guy I needed lots of light. There are 2 flood lights in addition to the room lights, but it was not truly adequate. I was always using a flashlight to look at something.
I am looking forward to reloading with this new addition.
I installed the KMS light several years ago. One of the best add on's ever. In hind sight it should be one of the first things to add to your press. You are going to love how much nicer it is to look into each case.
Posts: 134 | Location: Arizona | Registered: August 02, 2011
Love my KMS light. I have an old style on my 550B and cut the light strip with a 45acp case I had set on the machine and raised the ram. It had the strip down the side as well. I got another new one but it only had the top strip. I cut the bad part off the top and still use it on the side.
NRA Life member NRA Certified Instructor "Our duty is to serve the mission, and if we're not doing that, then we have no right to call what we do service" Marcus Luttrell
KMS lights are probably the best upgrade to any press, with an ergonomic roller handle a close second. I have tried lights from both Hornady and Inline Fabrication, and KMS lights are the brightest and best designed by far.
Posts: 69 | Location: Lancaster, PA | Registered: July 21, 2018