Go | New | Find | Notify | Tools | Reply | |
| Member |
I am in the process of (finally!) setting up my reloading room. My bench is built (35" tall 25" x 96" maple butcher block on a Kreg base). I was looking at Inline Fabrication products. They look good. They are also spendy. What products have you used and kept using? Ergo roller handle? Conventional roller handle? High, medium, low, flush mount? Accessories? I have a $150 gift card burning a hole in my pocket and decided to use it on luxury items for the bench that I would not ordinarily splurge on. What would you buy and why? Bruce Every day, the New York Times carries a motto in a box on its front page. "All the News That's Fit to Print," it says. It's been saying it for decades, day in and day out. I imagine most readers of the canonical sheet have long ceased to notice this bannered and flaunted symbol of its mental furniture. I myself check every day to make sure that the bright, smug, pompous, idiotic claim is still there. Then I check to make sure that it still irritates me. If I can still exclaim, under my breath, why do they insult me and what do they take me for and what the hell is it supposed to mean unless it's as obviously complacent and conceited and censorious as it seems to be, then at least I know I still have a pulse. You may wish to choose a more rigorous mental workout but I credit this daily infusion of annoyance with extending my lifespan. -Christopher Hitchens "At the core of liberalism is the spoiled child — miserable, as all spoiled children are, unsatisfied, demanding, ill-disciplined, despotic and useless. Liberalism is a philosophy of sniveling brats." -PJ O'Rourke “It is just as difficult and dangerous to try to free a people that wants to remain servile as it is to try to enslave a people that wants to remain free." -Niccolo Machiavelli | ||
|
member |
I have the Dillon aluminum roller handle, and the strong mount. The mount (whether or not) depends on what position you like for loading (standing or sitting, I stand). The smooth roller handle is the best of the three Dillon handles I've tried. Similar products are available from Inline, so if it's free with your certificate, I would just buy them there. You'll still have a few bucks left over, so the rest is up to you. all your sig are belong to us | |||
|
| Member |
I should have added that this is for a RCBS Rockchucker Supreme press. Bruce Every day, the New York Times carries a motto in a box on its front page. "All the News That's Fit to Print," it says. It's been saying it for decades, day in and day out. I imagine most readers of the canonical sheet have long ceased to notice this bannered and flaunted symbol of its mental furniture. I myself check every day to make sure that the bright, smug, pompous, idiotic claim is still there. Then I check to make sure that it still irritates me. If I can still exclaim, under my breath, why do they insult me and what do they take me for and what the hell is it supposed to mean unless it's as obviously complacent and conceited and censorious as it seems to be, then at least I know I still have a pulse. You may wish to choose a more rigorous mental workout but I credit this daily infusion of annoyance with extending my lifespan. -Christopher Hitchens "At the core of liberalism is the spoiled child — miserable, as all spoiled children are, unsatisfied, demanding, ill-disciplined, despotic and useless. Liberalism is a philosophy of sniveling brats." -PJ O'Rourke “It is just as difficult and dangerous to try to free a people that wants to remain servile as it is to try to enslave a people that wants to remain free." -Niccolo Machiavelli | |||
|
| Shit don't mean shit |
Flush mount, quick change bases and storage docks. He usually has a sale on the 4th of July or Memorial Day.   | |||
|
| Member |
I think he sells Dillon reloaders... just kidding. If it available for the Chucker, these are great on the Dillon XL650 Ergo Roller Handle is great as I reload standing up LED light kit is great Riser mount is great, I reload standing up I like the little hanger for primer tubes, probably doesn’t apply to you He has some good ideas for wall mount or track mount storage of dies etc if you have a flat wall. I haven’t got there yet, but I’ll get the holder for the tool head and such. Looking for an Alaskan Malamute? Look here: http://www.moonsongmals.org Do not send me to a heaven where there are no dogs. Step Up or Stand Aside: Support the Troops ! | |||
|
Member |
I have 2 of the quick change mounts, flush, and ultra. This allows me to move the presses around so I have the option of standing or setting. I have a couple of the storage mounts that I move the presses to get them out/off of my bench depending on what I'm doing. Bench space is at a premium which it more usable. I have a spare vice mounted on a base too, that I move over when I'm working on things that require it. May be seam a little high on the price till you see how well they build and the thickness of the parts. These are All heavy duty, 1/4" plate steel. As for as the handles, I prefer a ball. I have a sock over it to allow it to spin easily in your hand. This allows the your arm, elbow and wrist all stay in it's natural alignment. David P229R 9mm, Nitron, Beavertail Frame, Night Sights, DA/SA, SRT & Short Reach Trigger | |||
|
| Member |
After doing some measuring, I ordered the Ultramount, a quick change plate for the press, and the Ergo roller handle. I already have the RCBS Accessory plate #2 that will get mounted somewhere else on the bench for the powder measure and/or trimmer. I am wondering if anyone likes the case ejection system and the primer catcher. I may order those during the next sale. Bruce Every day, the New York Times carries a motto in a box on its front page. "All the News That's Fit to Print," it says. It's been saying it for decades, day in and day out. I imagine most readers of the canonical sheet have long ceased to notice this bannered and flaunted symbol of its mental furniture. I myself check every day to make sure that the bright, smug, pompous, idiotic claim is still there. Then I check to make sure that it still irritates me. If I can still exclaim, under my breath, why do they insult me and what do they take me for and what the hell is it supposed to mean unless it's as obviously complacent and conceited and censorious as it seems to be, then at least I know I still have a pulse. You may wish to choose a more rigorous mental workout but I credit this daily infusion of annoyance with extending my lifespan. -Christopher Hitchens "At the core of liberalism is the spoiled child — miserable, as all spoiled children are, unsatisfied, demanding, ill-disciplined, despotic and useless. Liberalism is a philosophy of sniveling brats." -PJ O'Rourke “It is just as difficult and dangerous to try to free a people that wants to remain servile as it is to try to enslave a people that wants to remain free." -Niccolo Machiavelli | |||
|
| Member |
I have the case ejection system and it is very handy, I’d recommend it. I need to pull the plug and get the spent primer catch. | |||
|
Member |
LED light strip. Good stuff. --------------------------- My hovercraft is full of eels. | |||
|
semi-reformed sailor |
Flush mount and several bases for other items like a press, powder throw, etc "Violence, naked force, has settled more issues in history than has any other factor.” ― Robert A. Heinlein “ You may beat me, but you will never win.” sigmonkey-2020 | |||
|
3° that never cooled |
I recently purchased their LED light for the Dillon SDB press. Works as advertised. Much easier now to see that each case really does have powder,etc. COTEP #640, NRA Life | |||
|
Not Today |
I just installed my Ultramount and roller handle for my old RCBS RCII press. Good stuff. Thanks for posting. ________________________ Hi,I'm Buck Melonoma,Moley Russels' wart. | |||
|
| Shit don't mean shit |
I received an email from Dan @ Inline. CELEBRATE THE 4TH OF JULY ALL WEEK LONG! Enjoy 10% off sidewide at InLine Fabrication July 1st - 5th 2019 Use Promo Code: AMERICA at checkout | |||
|
| Master of one hand pistol shooting  |
Good people, good products. I have several things from them for Dillon 550s and H LnL. Lots of shelf and holder stuff too. They are across town from me now. Used to be less than a mile away. Actually 900 yards as the crow flies. SIGnature NRA Benefactor CMP Pistol Distinguished | |||
|
Prepared for the Worst, Providing the Best |
Light kit and roller handle for my LNL. Both have been fantastic. | |||
|
| Member |
I ordered again. 48" wall mount track, quick change plate holder for it, and a quick change mount for a vise. Currently lost by Fedex but I hope to have it, some day  Bruce Every day, the New York Times carries a motto in a box on its front page. "All the News That's Fit to Print," it says. It's been saying it for decades, day in and day out. I imagine most readers of the canonical sheet have long ceased to notice this bannered and flaunted symbol of its mental furniture. I myself check every day to make sure that the bright, smug, pompous, idiotic claim is still there. Then I check to make sure that it still irritates me. If I can still exclaim, under my breath, why do they insult me and what do they take me for and what the hell is it supposed to mean unless it's as obviously complacent and conceited and censorious as it seems to be, then at least I know I still have a pulse. You may wish to choose a more rigorous mental workout but I credit this daily infusion of annoyance with extending my lifespan. -Christopher Hitchens "At the core of liberalism is the spoiled child — miserable, as all spoiled children are, unsatisfied, demanding, ill-disciplined, despotic and useless. Liberalism is a philosophy of sniveling brats." -PJ O'Rourke “It is just as difficult and dangerous to try to free a people that wants to remain servile as it is to try to enslave a people that wants to remain free." -Niccolo Machiavelli | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
© SIGforum 2021